1. はじめに
This manual provides essential information for the safe and efficient operation of your Amazon Basics 4-Bay Ni-MH Battery Charger. Please read these instructions thoroughly before use and retain for future reference.
2.製品オーバーview
The Amazon Basics 4-Bay Battery Charger is designed for Ni-MH rechargeable batteries, supporting both AA and AAA sizes. It includes four AA 2000mAh rechargeable batteries.
主な特徴:
- 4ベイ設計: 最大 4 個の AA または AAA Ni-MH 電池を同時に充電します。
- LEDライトインジケーター: Provides clear status updates for each charging bay.
- インテリジェント充電: Features battery detection technology to prevent wrong polarity, overheating, and overcharging. Switches to trickle charge when batteries are full.
- Fast-Charging: Capable of fully charging 2 AA batteries within 3.5 hours, 4 AA within 7 hours; 2 AAA within 2 hours, and 4 AAA within 4 hours.
- 旅行に便利: Slim, lightweight design with a foldable Type A (American) plug.
3. 安全情報
- Use only Ni-MH specific chargers with independent charging channels and voltageモニタリング。
- Avoid timer-only chargers.
- Never use chargers designed for other battery types (e.g., NiZn or Li-ion), as this may cause damage or leakage.
- Verify device compatibility with 1.2V Ni-MH batteries.
- Ni-MH batteries are slightly larger than alkaline batteries; ensure proper fit.
- Replace all batteries simultaneously in a device for optimal performance.
- Consult the device manual for specific battery requirements.
- Do not expose the charger or batteries to extreme temperatures or moisture.
4. セットアップ
The Amazon Basics 4-Bay Battery Charger is designed for plug-and-play convenience. No complex setup is required.
- Ensure the charger's foldable plug is extended.
- Plug the charger directly into a standard Type A (American) wall outlet.
5. 操作手順
電池の挿入:
Insert 1 to 4 AA or AAA Ni-MH rechargeable batteries into the charging bays, ensuring correct polarity (+/-) as indicated on the charger and batteries.
LEDインジケーターガイド:
The charger features individual LED indicators for each battery bay to communicate charging status.
| 状態 | 説明 |
|---|---|
| Power on and quick diagnosis: | When connected to the power supply, all 4 LEDs will light up sequentially, followed by a single simultaneous flash. This occurs regardless of whether a battery is inserted or not. |
| Charging (Slow blinking): | Slow blinking (one flash per second) indicates the battery in the port is charging. |
| Battery charged (Solid white): | Solid white (no blinking) indicates the battery in the port is fully charged. To prevent overcharging, the charger will automatically switch to a protection mode after a set period, during which the LED indicator stays on without any change. |
| Errors (Fast blinking): | Fast blinking (two flashes per second) indicates a damaged battery or a non-rechargeable alkaline battery is in the port. Immediately remove the battery or unplug the charger. This fast blinking can also occur with old rechargeable batteries after hundreds of charge cycles over several years, especially if the battery voltage exceeds 1.5V after charging. |
公式製品ビデオ：使い方
Video 1: This official video from Amazon Product Imaging demonstrates the basic operation and usage of the Amazon Basics 4-Bay Battery Charger, including inserting batteries and understanding LED indicators.
6.充電時間
- 1-2 AA Ni-MH batteries (2000 mAh): 3.5時間でフル充電。
- 3-4 AA Ni-MH batteries (2000 mAh): 7時間でフル充電。
- 1-2 AAA Ni-MH batteries (800 mAh): 2時間でフル充電。
- 3-4 AAA Ni-MH batteries (800 mAh): 4時間でフル充電。
7. Battery Tips (Ni-MH)
- Verify device compatibility with 1.2V Ni-MH batteries.
- Runtime may be shorter than 1.5V alkaline batteries in some devices.
- Ni-MH batteries are slightly larger than alkaline batteries; check for proper fit to comply with IEC standards.
- Replace all batteries simultaneously in a device for consistent performance.
- Consult the device manual for specific battery requirements.
- Pre-charged and ready-to-use rechargeable batteries can be recharged up to 1000 times.
- Batteries maintain 80% capacity for up to 12 months due to low self-discharge.
8. Charger Tips
- Use only Ni-MH specific chargers.
- Ensure the charger has independent charging channels and voltage monitoring to prevent overcharging or undercharging.
- Avoid chargers that rely solely on timers.
- Never use chargers designed for other battery chemistries (e.g., NiZn or Li-ion) as this can cause damage or leakage.
9. メンテナンス
充電器とバッテリーの寿命を延ばし、最適なパフォーマンスを確保するには:
- Keep the charger and batteries clean and dry.
- Avoid exposing them to direct sunlight, high temperatures, or humid environments.
- バッテリーを使用しないときは、涼しく乾燥した場所に保管してください。
- Periodically inspect the charger and batteries for any signs of damage or leakage.
10。 トラブルシューティング
LED is fast blinking:
This indicates an error. Possible causes include:
- A defective or damaged battery.
- A non-rechargeable alkaline battery inserted.
- An old rechargeable battery that has exceeded its useful life or has a voltage exceeding 1.5V after charging.
アクション： Immediately remove the problematic battery or unplug the charger. Replace defective batteries with new Ni-MH rechargeable ones.
11. 仕様
| 特徴 | 詳細 |
|---|---|
| 製品寸法 | 1.08 x 2.71 x 4.82インチ |
| アイテム重量 | 3.52 オンス (0.1 キログラム) |
| モデル番号 | HFR-AA2000-HPTCH0033 |
| ブランド | Amazonベーシック |
| 色 | 黒 |
| 出力巻tage | 1.2ボルト |
| 入力ボリュームtage | 120ボルト |
| 初回利用可能日 | 6年2024月XNUMX日 |
12. 保証とサポート
For warranty information and customer support, please refer to the documentation included with your product or visit the official Amazon Basics webサイト。 保証請求に備えて購入時のレシートを保管しておいてください。