1. はじめに
Thank you for choosing Herdio 4 Inch Bluetooth Marine Speakers. This manual provides essential information for the proper installation, operation, and maintenance of your new audio system. Designed for outdoor environments, these waterproof speakers offer robust sound for marine, ATV, UTV, golf cart, and other powersports applications. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.
Image: Herdio 4 Inch Bluetooth Marine Speakers in white, showcasin製品デザイン。
2. 箱の中身
Upon opening your Herdio 4 Inch Bluetooth Marine Speakers package, please verify that all the following components are included:
- 4 x Marine Speakers with Mounting Brackets
- 1倍 Amplifier (Model AMP-BTX01)
- 電源ケーブル x 1
- 1 x Set of Bolts for installation
- 1 x ユーザーマニュアル（ Amplifier）
Video: Unboxing the Herdio 4 Inch 240W Marine Bluetooth Speakers for Golf Cart. This video demonstrates the contents of the package, including the four speakers, amplifier, power cable, and mounting hardware.
3. 製品仕様
| 特徴 | 仕様 |
|---|---|
| モデル名 | SZJW-4-61BT |
| スピーカータイプ | 屋外 |
| 取り付けタイプ | 表面実装 |
| 材料 | アクリロニトリルブタジエンスチレン（ABS） |
| 色 | 白 |
| 製品寸法（スピーカー1台あたり） | 奥行き4.3インチ x 幅4.3インチ x 高さ4.3インチ (11cm x 11cm x 11cm) |
| 商品重量（合計） | 6.38 ポンド (2.9 キログラム) |
| スピーカーサイズ | 4インチ |
| スピーカー最大出力 | 240ワット（スピーカー1台あたり60W） |
| インピーダンス | 4オーム |
| 周波数応答 | 80Hz-20kHz |
| 効率 | 91デシベル |
| 接続技術 | ブルートゥース5.0 |
| 無線通信技術 | ブルートゥース |
| Bluetooth範囲 | 20メーター（65.62フィート） |
| 耐水性レベル | 防水（IP66） |
| 電源 | コード式電気（12V DC） |
| 含まれるコンポーネント | 4 marine speakers with mounting brackets, 1 amplifier, 1 power cable, a set of bolts |
| 推奨用途 | Marine, Boat, UTV, ATV, Truck, Golf Cart, RV, Off-Road Vehicles, Outdoor activities, Water sports |
Image: Detailed product dimensions of a single Herdio 4 Inch Marine Speaker, showing measurements in inches and centimeters.
Image: Diagram illustrating the 60W maximum power output per speaker for deep stereo sound, highlighting the internal components.
4. セットアップとインストール
Follow these steps for proper installation of your Herdio Marine Speakers and amplifier：
4.1 Speaker Cable Connection to Ampリファイアー
- Identify the speaker cables. The white wire is positive (+), and the black wire is negative (-).
- Locate the speaker terminals on the amplifier（AMP-BTX01). There are terminals for Left+ (L+), Left- (L-), Right+ (R+), and Right- (R-).
- Using a small screwdriver, loosen the screws on the ampリファイア端子。
- Insert the corresponding speaker wires into the terminals. Ensure correct polarity: white to positive, black to negative.
- ネジを締めてワイヤーをしっかりと固定します。
Image: Wiring diagram illustrating the connection of four speakers to the Herdio amplifier and a 12V power supply, with Bluetooth pairing shown via a smartphone.
Video: Detailed demonstration of wiring the speaker cables to the amplifier terminals and connecting the power supply. The video also shows the Bluetooth pairing process and basic ampライファイアーコントロール。
4.2 電源接続
- Connect the provided 12V DC power cable to the amplifier's power input port.
- Connect the red wire of the power cable to the positive terminal of your 12V battery (e.g., car battery, marine battery).
- Connect the black wire of the power cable to the negative terminal of your 12V battery.
- Ensure all connections are secure to prevent power interruptions or damage.
4.3 スピーカーの取り付け
The speakers come with adjustable mounting brackets for flexible installation.
- To attach the bracket, turn the knob on the side of the speaker counter-clockwise to remove it.
- Position the bracket on your desired mounting surface (e.g., support bar, frame, roll-cage) and secure it using the provided screws.
- Place the speaker back onto the bracket and tighten the knob clockwise until the speaker is firmly held.
- Loosen the knobs slightly to adjust the speaker's angle (up to 180 degrees rotation) for optimal sound direction, then re-tighten.
Image: Illustration of the easy and flexible installation process, highlighting the 180-degree rotatable mounting bracket for the speakers.
5. 操作手順
5.1 Amplifierコントロール
の amplifier features several buttons for controlling playback and settings:
- 電源スイッチ （⏻): Long press for 3 seconds to power on/off. Short press to play/pause.
- モードボタン (MODE): Short press to switch between Bluetooth (BT), USB, Auxiliary (AUX), and Microphone (MIC) modes. Long press for 3 seconds to restore factory settings.
- Volume Down / TWS Button (VOL- TWS): Short press to decrease volume. Long press for 3 seconds to turn on/off TWS (True Wireless Stereo) mode.
- Volume Up / Mono Button (VOL+ MONO): Short press to increase volume. Long press for 3 seconds to turn on/off Mono mode.
- 前のトラックボタン（⏮): Short press for previous song. Long press for 3 seconds to fast rewind.
- 次のトラックボタン（⏰): Short press for next song. Long press for 3 seconds to fast forward.
画像: 詳細図 amplifier's control panel, labeling each button and its corresponding function for power, mode, volume, TWS, mono, and track navigation.
5.2Bluetoothペアリング
- 確実に amplifier is powered on. The blue Bluetooth indicator light will blink, indicating it is in pairing mode.
- モバイルデバイス（スマートフォン、タブレットなど）で、Bluetooth 設定に移動します。
- 検索する available devices and select "Herdio" or the specific model name (e.g., "AMP-BTX01") to connect.
- Once connected, the blue Bluetooth indicator light on the amplifier will become constant.
- これで、デバイスからのオーディオをHerdioスピーカーを通じて再生できるようになりました。
Image: A golf cart with Herdio speakers installed, illustrating Bluetooth connectivity from a smartphone to the speakers, indicating wireless audio streaming.
6. メンテナンス
To ensure the longevity and optimal performance of your Herdio Marine Speakers, follow these maintenance guidelines:
- クリーニング： 柔らかくてamp cloth to wipe down the speakers and amplifier. Avoid harsh chemicals, solvents, or abrasive cleaners, as these can damage the surfaces.
- 水への露出: While the speakers are waterproof (IP66 rated), prolonged submersion is not recommended. Ensure all connections are secure and protected from direct water spray when possible.
- ストレージ： If storing the speakers for an extended period, especially in harsh conditions, disconnect them from the power source and store them in a dry, protected area.
- 接続チェック: Periodically inspect all wiring connections to ensure they remain tight and free from corrosion. Loose connections can lead to poor sound quality or system malfunction.
- 環境要因: Avoid exposing the speakers to extreme temperatures or direct, prolonged sunlight when not in use, as this can degrade materials over time.
Image: A Herdio speaker being splashed with water, visually confirming its waterproof capabilities for marine and outdoor use.
7。 トラブルシューティング
If you encounter issues with your Herdio Marine Speakers, refer to the following common problems and solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 電源なし | Loose power connection; Battery drained; Ampリファイアオフ。 | Check power cable connections to amplifier and battery. Ensure battery has charge. Long press the power button on the ampライファイアーを押してオンにします。 |
| 音が出ない | Incorrect mode selected; Volume too low; Loose speaker wires; Device not paired. | Press MODE button to select correct input. Increase volume on amplifier and connected device. Check speaker wire connections. Re-pair Bluetooth device. |
| Bluetoothの切断 | デバイスが範囲外です。干渉があります。デバイスのバッテリー残量が少なくなっています。 | デバイスを近づける amplifier (within 20 meters). Avoid obstacles. Charge your device. Try re-pairing. |
| Poor Sound Quality (Distortion, Static) | Volume too high; Loose speaker connections; Damaged speaker wire; Interference. | Reduce volume. Check all speaker wire connections for tightness and proper polarity. Inspect wires for damage. Move away from other electronic devices. |
| Speakers Not Rotating | Knobs are too tight. | Loosen the side knobs slightly to allow for rotation, then re-tighten once the desired angle is achieved. |
8.保証とサポート
Herdio products are designed for reliability and performance. This product comes with a 限定保証. For specific warranty details, including coverage period and terms, please refer to the warranty information provided with your purchase or contact Herdio customer support.
If you require further assistance, have questions not covered in this manual, or need to claim warranty service, please contact Herdio customer support through the retailer where you purchased the product or visit the official Herdio web連絡先情報のサイト。
Herdio Direct Store: AmazonでHerdioストアを訪問