導入
This manual provides essential information for the safe and efficient use of your Tera EV Type 2 Wallbox 11kW 3-Phase Electric Vehicle Charging Station. Please read this manual thoroughly before installation and operation to ensure proper functionality and safety.
Image: The Tera EV Type 2 Wallbox charging station, featuring a sleek black design and integrated display.
The Tera EV charger is designed for electric vehicles (EVs) and plug-in hybrid electric vehicles (PHEVs), offering a maximum power output of 11 kW, 16A current, and 400V voltage. It complies with the European standard IEC 62196-2 and features advanced safety protections.
Image: The Tera EV charger in use, demonstrating its Type 2 and 3-phase CEE plug compatibility and plug-and-play operation.
Key features include a 7-meter charging cable, an integrated digital display for monitoring charging status, and an IP54 waterproof rating for outdoor use in various weather conditions. The pure copper charging cables ensure excellent conductivity and minimal heat generation.
Image: The Tera EV charger features a Type 2 connector and a CEE 3-phase plug, highlighting multiple safety protections.
セットアップとインストール
Professional installation by a qualified electrician is recommended for this 3-phase EV charging station to ensure compliance with local electrical codes and safety standards.
パッケージ内容:
Image: The package includes the EV charger unit, user manual, mounting plate, screw set, and a CEE 3-phase plug.
- EV Charger Type 2 Unit
- ユーザーマニュアル
- 取り付けプレート
- スクリューセット
- CEE 3-Phase Plug
- ケーブルホルダー
取り付け手順：
- 場所を選択してください: Choose a suitable wall location for the charging station, ensuring it is within reach of your vehicle's charging port and a compatible power source. The location should be protected from direct sunlight and heavy rain if possible, despite its IP54 rating.
- ドリル穴: Use the mounting plate as a template to mark and drill holes on the wall.
- 安全な取り付けプレート: 付属のネジとアンカーを使用して、取り付けプレートを壁に取り付けます。
- Mount Charger: Carefully place the EV charger unit onto the mounting plate.
- 安全な充電器: Fasten the anti-theft screw (if applicable) to secure the charger to the mounting plate.
- Install Cable Holder: Mount the cable holder near the charging station for convenient cable management.
Image: Visual guide for mounting the EV charger: drilling holes, attaching the mounting plate, securing the charger, and final assembly.
電気接続: Connect the CEE 3-phase plug to a compatible 400V, 16A 3-phase power outlet. Ensure the electrical circuit is properly protected with a residual current device (RCD) and circuit breaker as per local regulations.
操作手順
充電の開始:
- Ensure the charging station is properly connected to the power supply. The LED indicator on the unit should be lit.
- Take the Type 2 charging cable from the holder.
- Insert the Type 2 connector firmly into your electric vehicle's charging port.
- The charging process will begin automatically. The digital display will show charging progress, current power, and duration.
Image: The digital display provides real-time charging information, including energy delivered and charging speed.
請求の停止:
- Once charging is complete, or if you need to stop it prematurely, unlock your vehicle's charging port (if applicable).
- Remove the Type 2 connector from your vehicle.
- Return the charging cable to its holder on the wallbox.
ステータスインジケータ：
The LED indicators and digital display provide visual feedback on the charger's status:
- 緑色の点灯: Power on, no load (ready to charge).
- 緑色に点滅: Plug inserted, not charging (waiting for vehicle to initiate).
- 青一色： 充電完了。
- 青色点滅: 充電中です。
Image: Visual representation of the charger's status lights, indicating power, charging activity, and error states.
Adaptive Power Adjustment:
The charger features adaptive power adjustment to prevent overcharging and protect the vehicle's battery. The charging power may decrease as the battery approaches full capacity, ranging from 11 kW down to 1 kW, depending on the vehicle's requirements.
Image: The charger intelligently adjusts power output to optimize battery health and prevent overcharging.
充電モード：
The charger supports both three-phase and single-phase charging, adapting to the vehicle's capabilities.
Image: Comparison of three-phase and single-phase charging capabilities, showing how the charger adapts to different power inputs.
メンテナンス
- 定期清掃: 充電ステーションの外側を柔らかくて乾いた布で拭いてください。amp 布で拭いてください。研磨剤や溶剤は使用しないでください。
- ケーブル検査: Periodically inspect the charging cable and connectors for any signs of wear, damage, or corrosion. If any damage is found, discontinue use and contact customer support.
- 環境保護: The unit is IP54 rated for water and dust resistance. Ensure the cover is properly closed when not in use to maintain this protection.
- ユーザーが修理可能な部品はありません: The internal components of the charging station are not user-serviceable. Do not attempt to open or repair the unit yourself.
Image: The IP54 rating ensures the charger's durability and functionality in various weather conditions, requiring minimal external maintenance.
トラブルシューティング
If you encounter issues, refer to the following common problems and their solutions. For persistent problems, contact customer support.
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 充電器の電源が入りません。 | No power from the outlet, faulty connection. | Check the CEE 3-phase plug connection and the power supply. Ensure the circuit breaker is on. |
| 充電が開始されません。 | Vehicle not ready, connector not fully inserted, or vehicle communication error. | Ensure the Type 2 connector is fully inserted. Check vehicle's charging settings. Re-plug the connector. |
| 充電速度が遅い。 | Vehicle's battery management system limiting power, or external factors (e.g., grid load). | This may be normal due to adaptive power adjustment. Check vehicle's charging status. |
| Red LED indicator flashing. | Error detected (e.g., overcurrent, ground fault, overvoltage）。 | Refer to the error code on the digital display or the manual's error indicator section. Disconnect and reconnect. If persistent, contact support. |
Error Indicators (Red LED Flashing):
- 1 フラッシュ: Ground fault protection.
- 2回のフラッシュ: 過電流保護。
- 3回のフラッシュ: Earth leakage (ungrounded).
- 4回のフラッシュ: アンダー/オーバーボルtageアラーム。
- 5回のフラッシュ: Relay fault.
- 6回のフラッシュ: CP/CC fault.
If any red LED error occurs, disconnect the charger from the vehicle and power source, wait a few minutes, then reconnect. If the error persists, contact customer support.
技術仕様
| 特徴 | 仕様 |
|---|---|
| モデル番号 | Q8-Schwarz |
| ブランド | テラ |
| コネクタタイプ | Type 2, CEE 16A 5-pin |
| 対応デバイス | Electric Vehicles (EVs) and Plug-in Hybrid Electric Vehicles (PHEVs) |
| 入力ボリュームtage | 400ボルト |
| Amp怒る | 16A |
| 出力 | 11kW |
| 出力電流 | 16A |
| 出力巻tage | 400ボルト |
| 周波数範囲 | 50Hz |
| 電源 | AC |
| 特集 | ケーブルホルダー |
| 色 | 黒 |
| 重さ | 4.6キログラム |
| 侵入保護等級（IP） | IP54 |
| 動作温度 | -30℃～50℃ |
| 認定資格 | CE、UKCA、RoHS |
互換性:
This charger is compatible with all Type 2 electric vehicles. Exampファイルには以下が含まれますが、これらに限定されません。
- Tesla (Model S, 3, X, Y)
- Volkswagen (e-Golf, ID4)
- Jeep (Grand Cherokee 4xe, Wrangler 4xe)
- Toyota (Prius Prime, RAV4 EV, C-HR EV)
- Honda (EV Plus, Clarity Electric)
- Fiat (500e, 500e 3+1)
- Hyundai (Ioniq Electric, Kona Electric, Santa Fe Hybrid)
- Nissan (LEAF, LEAF S, LEAF S PLUS, Altra EV)
- Chevrolet (EV1, Bolt Volt)
Image: The Type 2 connector ensures broad compatibility with a wide range of electric vehicle models.
保証情報
Tera products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Tera webサイトでご確認ください。保証請求に備えて購入証明書を保管してください。
カスタマーサポート
For technical assistance, troubleshooting, or warranty inquiries, please contact Tera customer support through the following channels:
- Webサイト： Visit the official Tera webサポート リソースと連絡フォームのサイト。
- メールアドレス: 製品のパッケージまたは公式 webカスタマー サービス メール アドレスのサイト。
- 電話： 連絡先は公式ウェブサイトに掲載されている場合があります webサイトまたは製品ドキュメントに記載されています。
When contacting support, please have your product model number (Q8-Schwarz) and proof of purchase readily available.