WLJBIDET Bidet Filter Set Instruction Manual

1. はじめに

This manual provides essential information for the proper installation, operation, and maintenance of your WLJBIDET Bidet Filter Set. This filter is designed to protect the sensitive internal components of your WLJBIDET electric bidet toilet seat from foreign objects and impurities present in the water supply, ensuring a clean and hygienic experience.

Please read these instructions carefully before installation and retain this manual for future reference.

2. 互換性

The WLJBIDET Bidet Filter Set is engineered for exclusive compatibility with all models of WLJBIDET Electric Bidet Toilet Seats. It is crucial to verify that your bidet seat is a WLJBIDET brand product before attempting installation.

重要： This filter is not designed for use with bidet systems from other manufacturers or non-electric bidet attachments.

3. セットアップとインストール

The installation of the WLJBIDET Bidet Filter is a straightforward process. Follow these steps to ensure correct setup:

1. 給水を止める: Locate the water shut-off valve for your toilet and turn it clockwise until the water flow stops completely. Flush the toilet to relieve any remaining pressure in the tank.
2. Disconnect Existing Filter (if applicable): If you are replacing an old filter, carefully disconnect it from the bidet's water inlet and the water supply line. Have a small towel ready to catch any residual water.
3. Connect New Filter: Attach one end of the new WLJBIDET Bidet Filter to the water supply line and the other end to the bidet's water inlet. Ensure all connections are hand-tightened securely. Avoid over-tightening, which can damage the fittings.
4. 漏れがないか確認する: Slowly turn the water supply valve counter-clockwise to restore water flow. Carefully inspect all connections for any signs of leaks. If leaks are present, gently tighten the connections further until they stop.
5. Test Bidet: Once installation is complete and no leaks are detected, test your WLJBIDET electric bidet toilet seat to ensure proper function.

4. 操作手順

The WLJBIDET Bidet Filter operates passively and automatically once installed. It continuously filters the water supplied to your bidet seat, removing sediment and impurities before the water reaches the bidet's internal components and spray nozzle.

No user interaction is required for the filter's daily function. Its operation is integral to the bidet's water supply system.

5. メンテナンス

Regular replacement of the WLJBIDET Bidet Filter is essential for maintaining optimal bidet performance and ensuring consistent water quality. Over time, the filter will accumulate impurities, which can lead to reduced water flow or decreased filtration effectiveness.

• 使用期限： It is recommended to replace the WLJBIDET Bidet Filter every 4～6か月.
• 水の状態: In areas with particularly hard water or high sediment content, more frequent replacement may be necessary.
• 詰まりの兆候: If you notice a significant decrease in water pressure from your bidet or a change in water clarity, it may be an indication that the filter needs to be replaced sooner than the recommended interval.

Refer to Section 3 for detailed installation steps when replacing the filter.

6。 トラブルシューティング

If you encounter issues with your WLJBIDET Bidet Filter Set, please consult the following common troubleshooting tips:

• フィルターが適合しません:
  原因： The filter is designed exclusively for WLJBIDET Electric Bidet Toilet Seats.
  解決： Verify that your bidet seat is a genuine WLJBIDET product. This filter is not compatible with other brands.
• Reduced Water Flow from Bidet:
  原因： The filter may be clogged with sediment or impurities.
  解決： If the filter has been in use for 4-6 months or longer, or if water quality is known to be poor, replace the filter.
• 設置後の漏れ:
  原因： Connections may not be sufficiently tightened or O-rings are not properly seated.
  解決： Turn off the water supply, then carefully check and tighten all connections. Ensure any rubber washers or O-rings are correctly positioned within the fittings. Avoid excessive force when tightening.
• Water Still Appears Impure:
  原因： Extremely high levels of water impurities or filter nearing end of life.
  解決： Replace the filter if it's due for maintenance. If issues persist with a new filter, consider consulting a plumbing professional or your local water authority.

7. 仕様

8. 保証とサポート

For specific warranty information regarding your WLJBIDET Bidet Filter Set, please refer to the documentation included with your original WLJBIDET Electric Bidet Toilet Seat or visit the official WLJBIDET webサイト。

If you require technical assistance or have questions not covered in this manual, please contact WLJBIDET customer service through their official support channels.