JZAQ A13 Dual Pack Bluetooth Motorcycle Intercom Headset User Manual

1. はじめに

Thank you for choosing the JZAQ A13 Dual Pack Bluetooth Motorcycle Intercom Headset. This manual provides comprehensive instructions for the proper installation, operation, and maintenance of your device. Please read this manual carefully before use to ensure optimal performance and safety. This device is designed to provide clear communication and entertainment for two riders during various activities such as motorcycling, skiing, and cycling.

2. パッケージ内容

The JZAQ A13 Dual Pack includes the following items:

• 2 x Helmet Intercom Headsets (JZAQ A13 Main Unit)
• 2 x Microphones (Hard earbud type)
• 2 x Soft Earbuds (for alternative helmet types)
• 6 x Velcro Headphone Pads
• USB Type-C充電ケーブル2本
• 2 x Clip Bases
• 2 x Paste Bases
• ユーザーマニュアル x 1

Image: Contents of the JZAQ A13 Dual Pack, showing all included accessories for two intercom units.

3.製品オーバーview

The JZAQ A13 intercom features an ultra-thin speaker design for comfort and a robust main unit with intuitive controls. It is designed for seamless integration into various helmet types.

3.1 Ultra-thin Speaker Design

The earphone speakers are only 10mm thick, ensuring they do not cause discomfort or pressure on your ears, even during long rides.

Image: The JZAQ A13 intercom unit, emphasizing its slim profile for comfortable helmet fit.

3.2 ボタンの機能

Familiarize yourself with the buttons on the main unit for easy operation:

画像: 詳細 view of the JZAQ A13 intercom's buttons and their corresponding functions.

• Power On/Off / Pause/Play / Connect Button (Large Round Button): 長押しすると電源のオン/オフ、短く押すと音楽の再生/一時停止、通話の応答/終了ができます。
• 音量アップ/次の曲ボタン（+）： Short press to increase volume. Long press to skip to the next song.
• 音量を下げる / 前の曲 / 音声アシスタントボタン (-): Short press to decrease volume. Long press to go to the previous song. Double-click to activate the voice assistant (Siri/Google Assistant).
• Charging Port (USB Type-C): Located on the side for connecting the charging cable.
• ヘッドフォンジャック： For connecting the microphone and speaker assembly.

4. インストール

Follow these steps to install the JZAQ A13 intercom system into your helmet:

1. 取り付け場所を選択: Select a flat surface on the left side of your helmet for the main intercom unit.
2. 取り付けベースの取り付け:
   • クリップベース: Slide the clip base between the helmet shell and the inner padding. Ensure it is securely fastened.
   • ペーストベース: Clean the chosen helmet surface thoroughly. Peel off the adhesive backing from the paste base and firmly press it onto the helmet for at least 30 seconds. Allow 24 hours for the adhesive to cure before attaching the intercom unit.
3. メインユニットのマウント: Slide the JZAQ A13 main unit onto the installed mounting base until it clicks into place.
4. スピーカーの取り付け: Attach the velcro pads to the back of the speakers. Place the speakers inside the helmet's ear pockets, ensuring they are centered over your ears for optimal sound.
5. マイクのインストール: Attach the microphone to the inside of the helmet, positioning it close to your mouth but out of the way of your vision. Use the hard earbud microphone for open-face helmets and the soft earbud microphone for full-face helmets.
6. ケーブルを接続する: Plug the speaker and microphone cable into the headphone jack on the main intercom unit. Route the cables neatly under the helmet padding to avoid obstruction.

5. セットアップ

5.1デバイスの充電

Before first use, fully charge the intercom unit.

• Connect the USB Type-C charging cable to the charging port on the intercom unit and to a USB power source (e.g., computer, wall adapter).
• 充電時間は約2〜3時間です。
• The device supports charging voltage of USB 5V1A-2A.
• A red indicator light typically shows charging in progress, turning off or changing color when fully charged.

Image: Representation of the JZAQ A13's 1500mAh battery, providing up to 180 hours of continuous play.

5.2 電源オン/オフ

• 電源オン: Press and hold the large round Power On/Off button for approximately 3 seconds until you hear an audible prompt and the indicator light flashes.
• 電源を切る： Press and hold the large round Power On/Off button for approximately 3 seconds until you hear an audible prompt and the indicator light turns off.

5.3 携帯電話とのBluetoothペアリング

To connect your JZAQ A13 to your smartphone:

1. インターホンの電源がオフになっていることを確認してください。
2. Press and hold the large round Power On/Off button for about 5-7 seconds until the indicator light flashes red and blue alternately, indicating pairing mode.
3. スマートフォンで Bluetooth 設定に移動し、新しいデバイスを検索します。
4. Select "A13" from the list of available devices.
5. Once paired, the indicator light will flash blue slowly, and you will hear a confirmation tone.

5.4 インターコムのペアリング（ライダー2人）

The JZAQ A13 supports two-way intercom communication between two riders within a range of 200 meters. For optimal performance, ensure both units are fully charged.

Image: Visual representation of the JZAQ A13's two-way intercom capability, supporting communication between riders up to 800 meters apart (note: 2-rider intercom is 200m).

1. Ensure both A13 units are powered off.
2. On both units, press and hold the large round Power On/Off button for approximately 5-7 seconds until both units enter pairing mode (red and blue lights flashing alternately).
3. On one of the units, short press the large round Power On/Off button. The units will search for each other.
4. 接続されると、両方のユニットのインジケーター ライトが青色でゆっくり点滅し、確認音が聞こえます。
5. To initiate intercom communication, short press the large round Power On/Off button on either unit. To end intercom, short press it again.

6. 操作手順

6.1音楽の再生

After pairing with your phone, you can enjoy stereo music with noise reduction technology.

Image: The JZAQ A13 intercom unit, illustrating its capability for clear music playback through noise reduction technology.

• 再生/一時停止: Short press the large round Power On/Off button.
• ボリュームアップ： 「+」ボタンを短く押します。
• ボリュームダウン： 「-」ボタンを短く押します。
• 次の曲: 「+」ボタンを長押しします。
• 前の曲: 「-」ボタンを長押しします。

6.2 電話

The JZAQ A13 supports automatic answering and clear voice calls.

• 通話に応答: The device will automatically answer incoming calls after a few rings. You can also short press the large round Power On/Off button to answer manually.
• 通話終了: Short press the large round Power On/Off button.
• 通話を拒否: Long press the large round Power On/Off button during an incoming call.
• 最後の番号にリダイヤル： Double-click the large round Power On/Off button.

6.3音声アシスタント

Activate your smartphone's voice assistant (Siri or Google Assistant) directly from the intercom.

• 音声アシスタントを有効にする： Double-click the '-' (Volume Down) button.

6.4 インターコム通信

Once two units are paired for intercom, you can initiate communication:

• インターコムを開始: Short press the large round Power On/Off button on either unit.
• インターコム終了: Short press the large round Power On/Off button again.

7. メンテナンス

To ensure the longevity and optimal performance of your JZAQ A13 intercom, follow these maintenance guidelines:

• クリーニング： ユニットを柔らかいdで拭きますamp 布で拭いてください。強力な化学薬品や研磨剤入りの洗剤は使用しないでください。
• 耐水性: The device is IP67 rated, meaning it is protected against dust and can withstand immersion in water up to 1 meter for 30 minutes. It is suitable for use in rainy and snowy conditions. However, avoid prolonged submersion or high-pressure water jets.

Image: The JZAQ A13 intercom unit shown underwater, highlighting its IP67 deep waterproof capability for use in wet conditions.

• ストレージ： 使用しないときは、涼しく乾燥した場所に保管してください。極端な温度を避けてください。
• バッテリーのケア： 長期保管の場合は、過放電を防ぐために数か月ごとにバッテリーを約 50% まで充電してください。

8。 トラブルシューティング

If you encounter issues with your JZAQ A13 intercom, refer to the following common problems and solutions:

• 電源なし:
  • Ensure the battery is charged. Connect the unit to a charger and check for the charging indicator light.
  • Press and hold the Power On/Off button for the required duration (3 seconds).
• 電話とペアリングできません:
  • Ensure the intercom is in pairing mode (red and blue lights flashing alternately).
  • Make sure Bluetooth is enabled on your phone and it is discoverable.
  • Try restarting both the intercom and your phone.
  • Clear previous Bluetooth connections on your phone if you have too many.
• インターホンが接続されない:
  • Ensure both units are in intercom pairing mode (red and blue lights flashing alternately) before initiating connection.
  • Make sure the distance between the two units is within the effective range (200 meters).
  • Try resetting both units and repeating the intercom pairing process.
• 音が出ない、または音量が小さい:
  • インターホンと接続されている電話の両方の音量レベルを確認してください。
  • Ensure the speaker and microphone cables are securely connected to the main unit.
  • Verify that the speakers are correctly positioned over your ears inside the helmet.
• 音声アシスタントが応答しない:
  • Ensure your phone's voice assistant (Siri/Google Assistant) is enabled and configured.
  • Confirm the intercom is properly paired with your phone.
  • Double-click the '-' button firmly and quickly.

9. 仕様

10. 保証とサポート

The JZAQ A13 Bluetooth Motorcycle Intercom Headset comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product meets its specified performance standards under normal use.

For any technical assistance, troubleshooting, or warranty claims, please contact customer service through the Amazon Buyer Center. Our support team is available for 12 hours to assist you with any issues you may encounter.

保証を有効にするために購入証明書を保管してください。