EchoMaster PHDCAM10U ユニバーサルカメラ ユーザーマニュアル

1. はじめに

This manual provides detailed instructions for the installation, operation, and maintenance of your EchoMaster PHDCAM10U Universal AHD/CVBS Water-Proof Camera with Night Vision. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.

2. 安全情報

• Ensure the vehicle's power is disconnected before beginning installation to prevent electrical shock or damage.
• Always follow local regulations and traffic laws when installing and using this camera.
• Do not attempt to modify or disassemble the camera. This will void the warranty and may cause damage.
• Keep the camera and its components away from extreme temperatures, direct sunlight for prolonged periods, and corrosive chemicals.
• 最適なパフォーマンスと安全性を確保するには、専門家による設置をお勧めします。

3. パッケージ内容

パッケージに以下のすべての項目が含まれていることを確認してください。

• Universal HD Camera with butterfly bracket
• Tag-Mount Bracket (license plate bracket)
• Camera Wiring Harness
• 20 ft. Camera Extension Harness (EchoMaster Standard 5-Pin Cable)
• ハードウェアパック
• ユーザーマニュアル（このドキュメント）

Figure 3.1: Contents of the PHDCAM10U package, showing the camera, wiring harness, extension cable, and both mounting brackets.

4. 主な特徴

• Dual Resolution Output: Selectable Analog High Definition (AHD) 720P or Standard (CVBS) 480P output.
• Water/Debris-Proof: IP67 rated for rugged use in various environmental conditions.
• ナイトビジョン: Equipped with 4 IR LEDs for enhanced visibility in low-light or dark conditions.
• 広い View角度： 170° view包括的なカバレッジのための角度。
• Selectable Parking Lines: Option to display or hide parking guide lines on the monitor.
• Selectable Mirror Mode: Allows the camera image to be mirrored or non-mirrored, suitable for front or rear mounting.
• 複数の取り付けオプション: Includes both license plate bracket and butterfly bracket for versatile installation.
• ユニバーサル接続: Standard 5-pin EchoMaster connector with a 20 ft extension harness and RCA video connector for compatibility with various monitors or head units.

図4.1: 前面 view of the PHDCAM10U camera, highlighting the lens and IR LEDs for night vision.

図4.2: 角度付き view of the PHDCAM10U camera, illustrating its compact form factor and integrated butterfly bracket.

5.インストールガイド

5.1取り付けオプション

The PHDCAM10U camera offers two primary mounting methods:

• ナンバープレートブラケット： Attach the camera to the included license plate bracket for discreet mounting near the vehicle's license plate.
• Butterfly Bracket: The camera comes pre-attached to a butterfly bracket, allowing for surface mounting on any flat surface of the vehicle.

5.2配線手順

正しく配線するには、次の手順に従ってください。

1. 電源接続: Connect the red wire from the camera's wiring harness to a 12V switched power source (e.g., reverse light power for a backup camera, or accessory power for a front camera). Connect the black wire to a reliable vehicle ground.
2. ビデオ接続: Connect the 5-pin connector from the camera to the 20 ft. extension harness. Route the extension harness to your monitor or head unit.
3. モニター接続： Connect the RCA video output from the extension harness to the video input of your compatible monitor or head unit.
4. テスト機能: Before finalizing the installation, power on your vehicle and test the camera's video feed and selectable features.

6. 操作手順

6.1 Resolution Selection (AHD/CVBS)

The PHDCAM10U supports both AHD (720P) and CVBS (480P) video outputs. The camera typically has a small wire loop or switch on its harness for resolution selection. Consult the specific wiring harness for your unit to determine how to switch between AHD and CVBS modes. Ensure your monitor or head unit is compatible with the selected resolution.

6.2 Parking Line Display

The camera can display parking guide lines on the video feed. There is typically a small wire loop on the camera harness that, when cut or connected, will toggle the parking lines on or off. Refer to the wiring diagram provided with your camera for the exact wire.

6.3 ミラーモード

The camera's image can be set to mirrored (for rear view) or non-mirrored (for front view). Similar to parking lines, a specific wire loop on the harness controls this function. Cutting or connecting this wire will switch the image orientation. Ensure the image is correctly oriented for your application.

6.4 ナイトビジョン

The integrated IR LEDs automatically activate in low-light conditions, providing enhanced visibility during nighttime or in dark environments. No user intervention is required for night vision activation.

7. メンテナンス

• クリーニング： カメラのレンズは定期的に柔らかくてきれいな布で拭いてください。amp cloth to remove dirt, dust, or water spots. Avoid abrasive cleaners or materials that could scratch the lens.
• 検査： カメラの取り付けと配線接続が安全で損傷がないことを定期的に確認してください。
• 水への露出: While the camera is IP67 rated, avoid directing high-pressure water jets directly at the camera for extended periods.

8。 トラブルシューティング

9. 仕様

10. 保証とサポート

EchoMaster products are designed for reliability and performance. This product is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official EchoMaster webサイト。

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact EchoMaster customer service through their official channels. Always provide your product model number (PHDCAM10U) when seeking support.