導入
This manual provides detailed instructions for the setup, operation, and maintenance of your SZELAM Projection Alarm Clock. Please read this manual thoroughly before use to ensure proper functionality and to maximize your experience with the product.
パッケージ内容
開梱の際には、以下に挙げる品目がすべて揃っていることを確認してください。
- SZELAMプロジェクション目覚まし時計 x 1
- 電源アダプター x 1
- 1 x USB-C充電ケーブル
- 製品マニュアル x 1
製品終了view
Familiarize yourself with the various components and controls of your alarm clock:
画像： 前面と背面 view of the SZELAM Projection Alarm Clock, highlighting the 7.4-inch display, USB-A output, USB-C output, USB-C input, time display, projection lens, settings button, auto dimming sensor, night light control button, speaker, and memory battery compartment.
設定
- 電源接続: Connect the provided USB-C charging cable to the USB-C input port on the back of the alarm clock and plug the power adapter into a standard electrical outlet.
- バッテリーバックアップ： The clock includes a CR2 battery for memory backup. Ensure the plastic tab is removed from the battery compartment to activate it. This preserves time settings during power outages。
- 初期時間設定: Press and hold the 'SET' button on the top of the clock. Use the '+' and '-' buttons to adjust the hour and minute. Press 'SET' again to confirm each setting.
- 12/24H Mode: Briefly press the 'SET' button to toggle between 12-hour and 24-hour time display modes.
操作手順
時間表示設定
- 明るさ調整: Press the 'Brightness' button (sun icon) on the top to cycle through 6 levels of display brightness (100%-80%-50%-30%-10%-OFF). The clock also features an auto-dimming sensor.
- カラーモード： Press the 'Color' button (lightbulb icon) to switch between 11 color modes for the digital display, including 4 dynamic RGB colors and 7 fixed color modes.
画像： The 7.4-inch LED mirror display showcasing various color modes for the time, including RGB Cycle, Random Color, RGB Flowing, White, Red, Yellow, Green, Light Blue, Blue, and Purple.
投影設定
- 投影の有効化/無効化: Press the 'Projection' button (projector icon) to turn the time projection on or off.
- 投影の回転: The projector arm can be rotated 180° to project the time onto a wall or ceiling.
- 投影の明るさ： Repeatedly press the 'Projection' button to cycle through 4 levels of projection brightness.
画像： A hand rotating the projector arm of the alarm clock, demonstrating its 180-degree adjustability for projecting time onto a surface.
アラーム設定
- 目覚ましを設定する： Press and hold the 'AL' button. Use the '+' and '-' buttons to set the desired alarm time. Press 'AL' again to confirm.
- アラーム音量: Press the 'VOL' button to cycle through 5 alarm volume levels (55-65-75-85-95db).
- スヌーズ機能： When the alarm sounds, press the large 'Snooze' button on top to activate snooze for 5-60 minutes. To turn off the alarm, press any other button.
画像： A person pressing the snooze button on top of the alarm clock, with the display showing the time and a snooze icon, indicating the snooze function is active.
ナイトライト設定
- カラーモード： Press the 'Light' button on the back to cycle through 10 night light color modes, including 3 dynamic RGB colors and 7 fixed color modes.
- 明るさ調整: The night light has 5 adjustable brightness levels.
画像： The alarm clock displaying various night light colors on its base, including RGB Flowing, RGB Changing, RGB Breathing, Warm White, Red, Yellow, Green, Light Blue, Blue, and Purple.
USB充電ポート
- The clock is equipped with one USB Type-C output port and one USB-A output port, allowing you to charge up to two electronic devices simultaneously.
画像： A close-up of the back of the alarm clock, showing a USB-A output port and a USB-C output port, with charging cables connected to a smartphone and wireless earbuds.
メンテナンス
- クリーニング： Use a soft, dry cloth to clean the mirror display and the body of the clock. Avoid abrasive cleaners or solvents that may damage the surface.
- 配置: 直射日光、過度の熱、湿気を避け、安定した平らな面の上に時計を置いてください。
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 時計の電源が入らない | 電源アダプターが接続されていないか故障しています。 | Ensure the power adapter is securely plugged into the clock and a working outlet. Try a different outlet or adapter. |
| 投影が暗かったり不明瞭だったりする | Projection brightness too low or too much ambient light. | Increase projection brightness using the 'Projection' button. Reduce ambient light in the room. Adjust projection angle. |
| アラームが鳴らない | アラームが設定されていないか、音量が低すぎます。 | Verify alarm time is set correctly. Increase alarm volume using the 'VOL' button. |
| Time display is too bright/dim | Display brightness not adjusted. | Adjust display brightness using the 'Brightness' button (sun icon). |
仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | SZUK-8853B-RG01 |
| 表示タイプ | Digital LED Mirror |
| 画面サイズ | 7.4インチ |
| 製品寸法 | 幅6.6インチ x 高さ3.8インチ |
| アイテム重量 | 150グラム |
| 電源 | Corded Electric, Battery Powered (CR2 backup) |
| 投影距離 | 1.64〜11.4フィート（0.5〜3メートル） |
| USB出力ポート | USB-A x 1、USB-C x 1 |
| 表示色 | 11 (4 dynamic RGB + 7 fixed) |
| 夜間照明の色 | 10 (3 dynamic RGB + 7 fixed) |
| アラーム音量レベル | 5 (55-95db) |
| スヌーズ時間 | 5～60分 |
保証とサポート
Your SZELAM Projection Alarm Clock is covered by a 30-day unconditional refund/replacement policy and a 1-year warranty. If you encounter any issues or are not satisfied with your product, please contact SZELAM customer support via email for assistance. A solution will be provided within 24 hours.
公式製品ビデオ
ビデオ： An official product video from SZELAM demonstrating the features and functionality of the Projection Alarm Clock, including its RGB display, night light, and projection capabilities.