導入
This manual provides essential information for the operation and care of your Transformers Legacy United Deluxe Class Animated Universe Bumblebee action figure. This 5.5-inch figure is inspired by the Transformers: Animated series and features a 2-in-1 conversion between robot and mini car modes.
主な機能は次のとおりです。
- Authentic deco and detail inspired by the Transformers: Animated animated series.
- Converts from robot to mini car mode in 22 steps.
- Includes 2 Stinger accessories and 2 turbo booster accessories, which can be attached in both modes.
- Articulated head, arms, and legs for dynamic posing.
安全情報
警告: 窒息の危険 – 小さな部品が発生する場合があります。3歳未満のお子様には適していません。
This product is recommended for ages 8 years and up. Adult supervision is advised for younger users.
箱の中身
パッケージを開封したら、すべてのコンポーネントが揃っていることを確認してください。
- 1 x Animated Universe Bumblebee Figure
- 2 x Stinger Accessories
- 2 x Turbo Booster Accessories
- 1 x Instruction Sheet (this manual)
Image: The Bumblebee figure displayed next to its retail packaging, showing the contents as they appear when new.
設定
Your Transformers figure comes ready for play directly out of the box. No assembly is required beyond the transformation process. Carefully remove the figure and accessories from the packaging.
The included Stinger and turbo booster accessories can be attached to the figure in both robot and vehicle modes. Refer to the operating instructions for specific attachment points.
操作手順：変形
The Animated Universe Bumblebee figure converts between robot mode and mini car mode in 22 steps. Follow the instructions below carefully to avoid damage to the figure. Apply gentle, firm pressure during transformation.
Robot Mode to Mini Car Mode (22 Steps)
Image: Animated Universe Bumblebee in his robot form, ready for transformation.
- Ensure all accessories (Stingers, turbo boosters) are removed from the figure.
- ロボットの手を前腕に折り曲げます。
- Rotate the forearms inwards.
- Collapse the chest panel forward to begin forming the car's front.
- Fold the robot's head down and back into the chest cavity.
- Bring the shoulder sections together to form the car's roof and windshield.
- Align and snap the roof sections into place.
- 腰を180度回転させます。
- Straighten the robot's legs.
- Fold the robot's feet upwards to become the rear bumper.
- Rotate the lower leg panels to align with the car's side panels.
- Bring the two leg sections together, ensuring they lock securely to form the rear of the car.
- Adjust the side panels to complete the car's body.
- Ensure all panels are flush and locked into place for a complete vehicle mode.
Image: Animated Universe Bumblebee in his mini car form.
付属品: The Stinger accessories can be attached to the figure's hands in robot mode or to designated ports on the sides/front of the car in vehicle mode. The turbo booster accessories can be attached to the rear of the car in vehicle mode.
Image: Bumblebee in robot mode with Stinger accessories attached to his arms.
Image: Bumblebee in mini car mode with Stinger accessories attached to the sides.
注記： The transformation steps are designed to be intuitive. If you encounter resistance, do not force parts. Re-examine the previous steps to ensure proper alignment. A visual guide is often provided on the product packaging or official online resources.
Image: Back of product packaging illustrating the 22-step transformation process.
Mini Car Mode to Robot Mode
To convert the figure back to robot mode, reverse the steps outlined above. Begin by separating the rear car sections to form the legs, then unfold the front car section to reveal the robot's torso and head. Ensure all panels are securely locked into place for a stable robot form.
メンテナンス
- クリーニング： フィギュアの埃を取り除くには、柔らかく乾いた布で拭いてください。頑固な汚れには、軽く湿らせた布で拭いてください。amp 布で拭いても構いませんが、過度の湿気は避けてください。刺激の強い化学薬品や研磨剤入りの洗剤は使用しないでください。
- ストレージ： Store the figure in a cool, dry place away from direct sunlight and extreme temperatures to prevent discoloration or material degradation.
- 取り扱い： Handle the figure by its main body parts. Avoid pulling or twisting small, delicate parts with excessive force, especially during transformation.
トラブルシューティング
| 問題 | 考えられる原因 / 解決策 |
|---|---|
| Figure parts do not align during transformation. | Ensure all previous steps are completed correctly. Some panels may need to be rotated or folded precisely before others can align. Do not force parts; gently re-adjust. |
| アクセサリがしっかりと取り付けられません。 | Verify that you are using the correct accessory for the designated port. Ensure the port is clear of debris. Apply gentle pressure until a click is heard or felt. |
| Figure feels loose or unstable in a particular mode. | Check that all locking tabs and panels are fully engaged. Review the transformation steps to ensure no step was missed or partially completed. |
仕様
| 属性 | 詳細 |
|---|---|
| 製品寸法 | 2.52 x 5.51 x 8.62インチ |
| アイテム重量 | 4.6オンス |
| モデル番号 | F8524 |
| 推奨年齢 | 8歳以上 |
| メーカー | ハズブロ |
| 発売日 | 16年2023月XNUMX日 |
保証とサポート
For information regarding product warranty or to obtain support for your Transformers figure, please contact Hasbro customer service directly. Details can typically be found on the official Hasbro webサイトまたは製品パッケージに記載されています。
オンラインリソース: Visit the official Transformers brand store for additional product information and updates:Amazonのトランスフォーマーストア
公式製品ビデオ
このマニュアルに埋め込むための、販売者からの公式製品ビデオはありませんでした。