SKYBASIC Endoscope Camera G40 User Manual

1. はじめに

The SKYBASIC Endoscope Camera G40 is a versatile inspection tool designed for examining hard-to-reach areas. It features a 4.3-inch LCD screen, an IP67 waterproof camera with 8 adjustable LED lights, and a 5-meter semi-rigid cable. This manual provides essential instructions for the proper setup, operation, and maintenance of your device to ensure optimal performance and longevity.

2.製品オーバーview

The SKYBASIC Endoscope Camera G40 is designed for ease of use, requiring no external phone, Wi-Fi, or application. It operates as a standalone unit with an integrated display.

Figure 2.1: The SKYBASIC Endoscope Camera G40 is a self-contained unit, eliminating the need for external devices or applications.

2.1 コンポーネント

• 本体: Ergonomic handle with integrated 4.3-inch LCD screen and control buttons.
• カメラプローブ: Flexible 5-meter semi-rigid cable with an 8mm diameter camera head.
• LEDライト: 8 adjustable LED lights integrated into the camera head for illumination.
• 付属品: Hook, magnet, and side mirror attachments.
• USB充電ケーブル： 内蔵バッテリーを充電します。

Figure 2.2: The 4.3-inch color display provides a clear view, and the intuitive controls allow for easy operation.

3. セットアップ

3.1デバイスの充電

Before first use, ensure the device is fully charged. Connect the provided USB charging cable to the device's charging port and to a standard USB power adapter (not included). The device features a 2000mAh Lithium-polymer battery.

Figure 3.1: The device is powered by a 2000mAh battery and charges via a Type-C USB port.

3.2 付属品の取り付け

The endoscope comes with a hook, magnet, and side mirror. These can be attached to the camera head for specific inspection needs. Carefully secure the desired accessory to the tip of the camera probe.

Figure 3.2: The endoscope is suitable for various applications, including machine, home, pipeline, and car inspections.

4. 操作手順

4.1 電源のオン/オフ

• To power on, press and hold the power button located on the handle until the screen illuminates.
• 電源を切るには、画面が消えるまで電源ボタンをもう一度押し続けます。

4.2 LEDの明るさの調整

The camera probe is equipped with 8 adjustable LED lights. Use the dedicated brightness control buttons on the handle to increase or decrease the illumination level. There are three adjustable brightness levels to suit different inspection environments.

Figure 4.1: The camera probe features 8 adjustable LED lights and is IP67 waterproof.

4.3 検査の実施

• Gently insert the camera probe into the area you wish to inspect. The semi-rigid cable allows for flexible maneuvering.
• Observe the real-time feed on the 4.3-inch color LCD screen.
• Adjust the LED brightness as needed to achieve a clear view.
• The optimal focal distance for clear imaging is between 2 cm and 10 cm (0.78-3.93 inches).

Figure 4.2: The optimal focal distance for the endoscope camera is 2-10 cm for clear images.

注記： This endoscope is designed for real-time viewing only and does not support photo or video recording functions.

5. メンテナンス

5.1 カメラレンズのクリーニング

毎回使用後、特に汚れや湿気の多い環境では、カメラのレンズを柔らかく乾いた布で優しく拭いてください。頑固な汚れには、軽く湿らせた布で拭いてください。amp cloth can be used, followed by drying. Ensure no liquid enters the camera body.

5.2 デバイスの保管

Store the endoscope in a cool, dry place, away from direct sunlight and extreme temperatures. Coil the camera cable loosely to prevent damage. Keep all accessories together with the main unit.

5.3バッテリーケア

バッテリーの寿命を延ばすには、バッテリーを頻繁に完全に放電させないでください。バッテリー残量が少なくなったら、デバイスを充電してください。長期間保管する場合は、数ヶ月ごとにバッテリーを約50%まで充電してください。

6。 トラブルシューティング

6.1 デバイスの電源が入らない

• バッテリーが十分に充電されていることを確認してください。USBケーブルを使用してデバイスを電源に接続し、少なくとも30分間充電してから再度電源を入れてください。
• Verify that the power button is pressed and held for a few seconds.

6.2 画像品質が悪い

• Check if the camera lens is clean. Refer to Section 5.1 for cleaning instructions.
• Adjust the LED brightness to an appropriate level for the environment.
• Ensure the camera is within the optimal focal distance of 2-10 cm from the object.

6.3 LEDライトが点灯しない

• デバイスの電源がオンになっていることを確認します。
• Attempt to adjust the LED brightness using the control buttons.
• If the issue persists, ensure the battery is charged, as low power can affect LED functionality.

7. 仕様

8. 保証とサポート

Warranty information for the SKYBASIC Endoscope Camera G40 is typically provided with your product purchase. Please refer to the documentation included in your product packaging for details regarding warranty coverage and how to obtain support. For further assistance, please contact SKYBASIC customer service through the contact information provided with your purchase or on the official SKYBASIC webサイト。