Cisco Catalyst C1000-8FP-2G-L 1000 Series 8-Port Full PoE Switch User Manual

1. はじめに

The Cisco Catalyst C1000-8FP-2G-L is an 8-port Gigabit Ethernet switch designed for small and medium-sized businesses. It features Power over Ethernet Plus (PoE+) capabilities, allowing it to power compatible devices such as IP phones, wireless access points, and surveillance cameras directly through the network cable. This switch offers robust security features, flexible management options via Cisco IOS CLI or an intuitive web UI, and a compact form factor for versatile deployment.

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Cisco Catalyst C1000-8FP-2G-L switch.

2. 安全情報

Please read all safety warnings and instructions before installing or operating this equipment. Failure to follow these instructions could result in injury or damage to the product.

• 電源ボリュームを確認してくださいtage はデバイス ラベルに指定された要件を満たしています。
• 過度の熱、湿気、ほこりのある環境ではスイッチを操作しないでください。
• 過熱を防ぐため、換気口をふさがないようにしてください。
• Only use the power adapter supplied with the device or a Cisco-approved replacement.
• Do not attempt to open or repair the switch yourself. Refer all servicing to qualified personnel.

3. パッケージ内容

パッケージに次のアイテムが含まれていることを確認してください。

• Cisco Catalyst C1000-8FP-2G-L Switch
• Accessory Kit (includes mounting hardware)
• Printed Document (Quick Start Guide or similar)
• 電源コード

不足または破損している品目がある場合は、ベンダーまたは Cisco サポートにお問い合わせください。

4.製品オーバーview

The Cisco Catalyst C1000-8FP-2G-L switch features 8 Gigabit Ethernet ports with full PoE+ support and 2 SFP/RJ-45 combo uplink ports. The front panel provides status indicators and connectivity ports for easy monitoring and management.

Figure 4.1: Front Panel Layout of the Cisco Catalyst C1000-8FP-2G-L Switch. This image displays the 8 Gigabit Ethernet ports (labeled 1-8), two SFP/RJ-45 combo uplink ports (labeled SFP9, SFP10), a console port, and a USB port. Various LED indicators are also visible.

4.1. フロントパネルのコンポーネント

• ギガビット イーサネット ポート (1 ～ 8): 10/100/1000 Mbps ports supporting PoE+.
• SFP/RJ-45 Combo Ports (SFP9, SFP10): These ports can function as either SFP fiber uplinks or RJ-45 copper uplinks.
• Console Port (Mini-USB Type B): For out-of-band management via a terminal emulator.
• USB Port (Type A): のために file management and configuration backup/restore.
• LEDインジケーター: System status, PoE status, and port status indicators.

5. セットアップ

5.1. 物理的な設置

The switch can be placed on a desktop or mounted in a rack using the provided accessory kit.

• デスクトップの配置: Ensure adequate ventilation around the switch. Do not place heavy objects on top of the switch.
• ラックマウント： Attach the rack-mount brackets to the sides of the switch using the screws provided. Secure the switch into a standard 19-inch equipment rack.

5.2. 電源の接続

1. 電源コードをスイッチの背面パネルにある AC 電源コネクタに接続します。
2. 電源コードのもう一方の端を接地されたコンセントに差し込みます。
3. The System LED on the front panel will illuminate when power is supplied.

5.3. ネットワークデバイスの接続

1. Connect your network devices (computers, servers, IP cameras, access points) to the Gigabit Ethernet ports (1-8) using standard Ethernet cables.
2. For uplink connections to other switches or routers, use the SFP/RJ-45 combo ports (SFP9, SFP10). If using SFP modules, ensure they are compatible Cisco SFP transceivers.

5.4. 初期設定

The switch can be configured via the Cisco IOS Command-Line Interface (CLI) or an intuitive webベースのユーザーインターフェース（Web UI）。

• Web UI: Connect a computer to any of the switch's Ethernet ports. The switch will typically obtain an IP address via DHCP. If no DHCP server is available, it will default to a specific IP address (refer to the Quick Start Guide for details). Open a web browser and enter the switch's IP address to access the Web UI。
• CLI： Connect a console cable from your computer's serial port (or USB-to-serial adapter) to the switch's console port. Use a terminal emulation program (e.g., PuTTY, Tera Term) with settings: 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control.

図5.1：例ample of the Cisco Catalyst 1000 Series Web UI. This image shows a graphical interface for managing switch settings, including monitoring, configuration, and troubleshooting tools.

6.運用

6.1. 基本的なネットワーク操作

Once connected and configured, the switch will forward data traffic between connected devices. The Gigabit Ethernet ports operate at 10/100/1000 Mbps, automatically negotiating speed and duplex settings.

6.2. パワーオーバーイーサネットプラス（PoE+）

The C1000-8FP-2G-L provides a 120W power budget for PoE+ devices. Connect PoE-compatible devices to any of the 8 Gigabit Ethernet ports. The switch will automatically detect and power these devices, eliminating the need for separate power adapters.

Figure 6.1: PoE+ Connectivity Diagram. This image visually explains how a PoE+ switch can power various network devices, such as IP phones, access points, and cameras, directly through Ethernet cables, removing the need for separate wall outlets.

6.3. Management and Security

The switch supports advanced management features and enterprise-class security:

• Cisco IOS CLI: Provides granular control over all switch functions.
• Web UI: Offers an intuitive graphical interface for common configuration and monitoring tasks.
• 集中管理: Up to 8 switches can be centrally monitored and configured via a single IP address.
• セキュリティ機能: Includes IPv4/IPv6 FHS security features like port security, DHCP snooping, dynamic ARP inspection, and 802.1x support.

7. メンテナンス

7.1. ファームウェアのアップデート

定期的にシスコを確認してください website for the latest firmware updates. Keeping your switch's firmware up-to-date ensures optimal performance, security, and access to new features. Follow the instructions provided with the firmware update package for proper installation.

7.2. 清掃

To maintain proper airflow and prevent overheating, regularly clean the switch's ventilation openings. Use a soft, dry cloth to wipe the exterior. Do not use liquid or aerosol cleaners.

7.3. 構成のバックアップ

Regularly back up your switch configuration to an external USB drive or a network server. This allows for quick restoration of settings in case of an issue or replacement.

8。 トラブルシューティング

8.1. よくある問題と解決策

• 電源なし: Check the power cord connection and the power outlet. Verify the System LED is illuminated.
• ネットワーク接続なし: Ensure Ethernet cables are securely connected. Check port status LEDs. Verify IP configuration on connected devices and the switch.
• PoE デバイスの電源が入らない: Confirm the device is PoE compatible. Check the PoE status LED for the port. Ensure the total PoE budget (120W) is not exceeded.
• アクセスできません Web UI: Verify your computer's IP address is in the same subnet as the switch. Try accessing via CLI. Clear browser cache.

8.2.LEDインジケーター

Refer to the Quick Start Guide or Cisco documentation for a detailed explanation of all LED indicators and their meanings, which can help diagnose issues.

9. 仕様

The following table outlines the key technical specifications for the Cisco Catalyst C1000-8FP-2G-L switch:

Figure 9.1: Cisco Catalyst 1000 Series 8-Port Comparison. This table provides a detailed comparison of various 8-port models within the Catalyst 1000 series, including the C1000-8FP-2G-L, showing differences in PoE budget, power supply, and fanless operation.

10. 保証とサポート

10.1. 保証情報

This Cisco Catalyst C1000-8FP-2G-L switch (Renewed) comes with a 90-day limited warranty. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.

10.2. テクニカルサポート

For technical assistance, documentation, and software downloads, please visit the official Cisco support website. You can also contact your reseller for support related to your renewed product.

• シスコサポート Webサイト： www.cisco.com/go/support