PETLIBRO 自動猫フィーダー

導入

This instruction manual provides detailed guidance on the setup, operation, and maintenance of your PETLIBRO Automatic Cat Feeder. Please read this manual thoroughly before using the product to ensure proper function and pet safety.

安全情報

• この製品は屋内でのみ使用してください。
• 使用していないときや組み立てているときは、子供やペットの手の届かないところに保管してください。
• Do not wash the feeder base with water; wipe only with a dry cloth.
• Ensure all parts are securely locked in place during installation and operation.
• Use only dry pet food with kibble sizes ranging from 2-15mm. Do not use wet food or kibble with a diameter over 15mm.

製品終了view およびコンポーネント

パッケージ内容

• PETLIBRO Automatic Cat Feeder (Main Unit)
• ステンレス製フードボウル
• 電源アダプターとケーブル
• 乾燥剤バッグ
• ユーザーマニュアル（このドキュメント）

製品図

Image: PETLIBRO Automatic Cat Feeder showing its main unit, food tank, and stainless steel bowl.

設定

1. 開梱と組み立て

1. パッケージからすべてのコンポーネントを慎重に取り出します。
2. Attach the stainless steel food bowl to the feeder base.
3. Insert the desiccant bag into its designated compartment under the lid to keep food fresh.
4. Fill the food tank with dry kibble (2-15mm diameter).
5. Securely close the lid by pressing down until it locks.

Image: The PETLIBRO Automatic Cat Feeder disassembled, showing the food tank, base, and bowl.

2. 電源

The feeder offers dual power options: AC adapter or 3 D-cell alkaline batteries (not included).

• ACアダプター： Plug the power adapter into the feeder and a wall outlet.
• バッテリー電源: Install 3 D-cell alkaline batteries in the battery compartment at the bottom of the feeder. This provides up to 180 days of operation and acts as a backup during power outages。

Image: PETLIBRO Automatic Cat Feeder highlighting its 180-day battery life feature.

操作手順

1. Setting Time and Feeding Schedule

1. Unlock the control panel by pressing and holding the lock button for 3 seconds.
2. Press the 'Set' button to enter time setting mode. Use '+' and '-' buttons to adjust the hour and minute. Press 'Set' again to confirm.
3. Press the 'Set' button again to enter meal setting mode. The meal icon (M:1) will flash.
4. Use '+' and '-' buttons to set the desired feeding time for Meal 1.
5. Press 'Set' to move to portion setting (P:0). Use '+' and '-' buttons to set the number of portions (1-16) for Meal 1.
6. Repeat steps 4-5 for up to 6 meals per day.
7. Press and hold the lock button for 3 seconds to lock the control panel and prevent accidental changes.

Image: A visual representation of setting up a feeding schedule with multiple meals and portions per day.

Image: The feeder's button protection panel, designed to prevent unintended button presses.

2. 手動給餌

To dispense food manually, press the 'Feed' button once. This will dispense one portion of food immediately.

Image: A cat eating dry food from the PETLIBRO Automatic Cat Feeder's stainless steel bowl.

メンテナンス

1. 清掃

1. 給餌器のプラグを抜き、残っている餌を取り除きます。
2. Disassemble the top lid, food tank, internal rotor, and stainless steel food bowl.
3. Wash the removable parts (lid, food tank, rotor, bowl) with water and mild detergent. Rinse thoroughly.
4. Wipe all parts dry before reassembly.
5. The feeder base cannot be washed with water. If cleaning is necessary, wipe it with a dry cloth.

Image: Detachable parts of the PETLIBRO Automatic Cat Feeder being cleaned under running water in a sink.

2. 乾燥剤の交換

Replace the desiccant bag every 2-4 weeks to maintain food freshness and prevent moisture buildup.

トラブルシューティング

よくある問題と解決策

• 給餌器から餌が出ない: Check if the food tank is empty or if kibble is jammed. Ensure the power supply is stable.
• インジケーターライト: A flashing red indicator can mean low food, food stuck, or low battery levels. Address the specific issue indicated.
• 誤ってボタンを押した場合: Utilize the button protection panel to prevent pets from changing settings.
• 時計が遅れている: Some users have reported minor time discrepancies over long periods. Regularly check and adjust the time if necessary.

Image: The smart status indicator on the PETLIBRO Automatic Cat Feeder displaying alerts for low food, food stuck, and low battery.