DORBOKER 30 Inch Real Moving Gears Wall Clock

1. はじめに

Thank you for choosing the DORBOKER 30 Inch Real Moving Gears Wall Clock. This manual provides essential information for the proper setup, operation, and maintenance of your new clock. Please read it thoroughly before installation and keep it for future reference.

2. 安全情報

Please observe the following safety precautions to ensure safe and proper use of the clock:

• Stay away from the source of fire: Do not place the clock near open flames or high heat sources.
• 感電防止: This device is battery-powered. Do not attempt to open or modify the electrical components.
• Beware of being overweight: Ensure the mounting surface can safely support the clock's weight (approximately 22 pounds or 10 kg).
• お子様の手の届かない場所に保管してください。
• Do not expose to excessive moisture or direct water.

Image: Warning label indicating fire, electric shock, and weight precautions.

3. パッケージ内容

すべてのアイテムが揃っていて良好な状態であることを確認します。

• DORBOKER 30 Inch Real Moving Gears Wall Clock (1 unit)
• 取扱説明書（本書）
• Mounting hardware (screws/wall plugs)
• Spare hour and minute hands (may be included for protection during shipping)

4.製品オーバーview

The DORBOKER Wall Clock features a unique industrial steampunk design with real moving gears. It is crafted from metal with a black gold Arabic finish and protected by a tempered glass lens.

画像: 斜め view of the DORBOKER 30 Inch Real Moving Gears Wall Clock, showcasing its metal frame, Arabic numerals, and visible internal gears.

Image: The 30-inch wall clock displayed in a living room setting, demonstrating its large size and decorative impact.

主な特徴:

• 大口径: 30 inches (76cm) with a depth of 3.3 inches (8.5cm).
• 実際に動く歯車: Multiple exposed gears in the central mechanism rotate independently when powered.
• 耐久性のある構造: Metal frame with an aluminum dial and tempered glass lens for dust protection.
• 正確な計時： High-quality quartz movement ensures precise time.
• サイレント操作： Designed for quiet performance, minimizing ticking sounds.
• 読みやすい: Large Arabic numerals are clearly visible from various angles.

Image: A diagram highlighting the clock's dimensions (27.56 inches / 70cm height, 3.3 inches / 8.5cm depth) and key components like the aluminum dial, mechanical moving gears, and dust-proof tempered glass lens.

Image: A detailed close-up of the clock's central mechanism, showing the intricate design of the mechanical real moving gears.

5. セットアップ

5.1. バッテリーの取り付け

The clock requires three (3) AA batteries (not included) for full functionality:

1. 時計の裏側にある電池ボックスを見つけます。
2. Insert one (1) AA battery into the compartment for the clock movement (timekeeping).
3. Insert two (2) additional AA batteries into the compartment for the mechanical gears rotation.
4. 電池が正しい極性 (+/-) で挿入されていることを確認してください。

画像: 背面 view of the clock, illustrating the separate battery compartments for the clock hands (1 AA battery) and the moving gears (2 AA batteries).

5.2. 時計の取り付け

The clock is designed for wall mounting. A keyhole bracket is provided on the back for easy installation.

1. Choose a suitable location on a sturdy wall that can support the clock's weight.
2. Mark the desired hanging point on the wall.
3. Install a screw (and wall anchor if necessary) at the marked point, ensuring it protrudes enough to securely hold the clock.
4. Carefully hang the clock using the keyhole bracket on the back.
5. Ensure the clock is level and securely fastened to prevent accidental falls.

画像: クローズアップ view of the keyhole bracket located on the back of the clock, designed for secure wall mounting.

6. 操作手順

6.1.時間を設定する

To set the time, locate the time-setting knob on the back of the clock's movement mechanism. Gently turn the knob to adjust the hour and minute hands to the correct time. Do not attempt to move the hands directly.

6.2. Moving Gears Function

Once the two (2) AA batteries for the gears are installed, the internal gears will begin to rotate continuously. This movement is independent of the clock's timekeeping function. The gears are designed to operate quietly, providing a dynamic visual element.

7. メンテナンス

7.1. 清掃

To clean the clock, gently wipe the tempered glass lens and metal frame with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or spray directly onto the clock.

7.2. Oiling the Gears

Over time, the moving gears may develop a slight whining or grinding sound. This is normal for mechanical parts and can be remedied by applying a small amount of light machine oil (e.g., clock oil or sewing machine oil) to the gear mechanisms. Refer to the manufacturer's guidelines for specific oiling points if available. If no specific points are indicated, apply sparingly to visible moving contact points of the gears.

注記： If you are uncomfortable performing this maintenance, consider consulting a professional or contacting customer support.

8。 トラブルシューティング

9. 仕様

10. 保証とサポート

For any questions, concerns, or support regarding your DORBOKER 30 Inch Real Moving Gears Wall Clock, please contact DORBOKER customer service. Refer to your purchase documentation or the seller's information for specific contact details and warranty terms.

保証請求のために購入証明書を保管しておくことをお勧めします。