Phanteks Revolt 1200W 80PLUS Platinum ATX 3.0 PCIe 5.0 Power Supply Unit Instruction Manual

1. はじめに

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Phanteks Revolt 1200W 80PLUS Platinum Power Supply Unit. Please read this manual thoroughly before installation and retain it for future reference.

The Phanteks Revolt series power supplies are designed for high performance, offering full support for Intel ATX 3.0 specifications and PCIe 5.0, with 80 Plus Platinum efficiency. This unit is sold without cables, allowing users to select custom modular cables (e.g., from CableMod) to suit their specific system requirements.

2. 安全情報

警告： 不適切な設置や使用は、機器の損傷、感電、または重傷につながる可能性があります。必ず以下の安全ガイドラインに従ってください。

• 取り付け、取り外し、またはメンテナンスを行う前に、必ず電源が AC 電源コンセントから切断されていることを確認してください。
• この電源はコンピュータシステム専用に設計されています。他の用途には使用しないでください。
• 電源ユニットを開けないでください。高電圧tag内部には部品が備わっており、ユーザーが修理可能な部品はありません。ユニットを開けると保証は無効になります。
• 電源装置は、熱源、直射日光、湿気を避け、換気の良い場所に設置してください。
• Use only approved and compatible modular cables. This power supply unit does not include cables; they must be purchased separately.
• システムの電源を入れる前に、すべてのコネクタがしっかりと接続されていることを確認してください。
• お子様の手の届かない場所に保管してください。

保護機能: The Phanteks Revolt power supply includes multiple protection mechanisms to ensure system stability and safety:

• OPP (Overpower Protection): Prevents damage from excessive total power output.
• OVP（オーバーボリュームtage 保護): Safeguards components from voltageスパイク。
• UVP (アンダーボリュームtage 保護): 不足したボリュームから保護しますtag電子配送。
• SCP（短絡保護）: ショートによる損傷を防ぎます。
• OCP（過電流保護）： Protects against excessive current on individual rails.
• OTP (過熱保護): 内部温度が高くなりすぎるとユニットをシャットダウンします。
• 無負荷保護: Ensures stable operation even without a load.
• リセット保護: Allows the unit to recover safely after a protection event.

3. パッケージ内容

パッケージにすべてのアイテムが含まれていることを確認します。

• 1x Phanteks Revolt 1200W Power Supply Unit (Model: PH-P1200PR_BK01C)
• 1x C14 (female) - C13 (male) Power cord (1500mm)
• 1x User’s manual (this document)
• 1xインストールガイド
• 1x PSU bag
• 1x Zip tie bag
• ネジパック x 1
• 1x Velcro pack
• 1x PSU tester

Note: Modular cables are NOT included with this power supply unit and must be purchased separately.

4.製品オーバーview

4.1 主な特徴

• 1200W DC Output: 提供する ample power for high-performance systems.
• 80 PLUS プラチナ認定: Achieves up to 94% efficiency at 50% load, reducing power consumption and heat.
• ATX 3.0 & PCIe 5.0対応: Fully supports the latest Intel ATX 3.0 specifications and includes a 12VHPWR connector for PCIe 5.0 GPUs, delivering up to 600W.
• 完全モジュール設計: Allows for custom cable selection and improved cable management. Cables are sold separately.
• 135mm流体動圧軸受（FDB）ファン： Ensures quiet and efficient cooling with hybrid fan control for silent operation.
• High Peak Power Capability: Designed to handle power peaks up to 235% of its rated output, exceeding industry standards.
• Seasonic Collaboration: Developed with Seasonic to ensure high standards of performance and reliability.

4.2 物理的寸法とコンポーネント

The Phanteks Revolt 1200W PSU measures 160 mm (L) x 150 mm (W) x 86 mm (H) (6.3 in x 5.9 in x 3.4 in) and weighs 2.26 kg (4.98 lbs).

フロント View (Fan Side)

Modular Cable Connectors

Custom Cable Compatibility

Internal Design (Seasonic Platform)

Important Note: Cables Not Included

背面パネル

Revolt Series Comparison

5. セットアップとインストール

Before proceeding, ensure your system is powered off and disconnected from the AC outlet. Refer to your computer case and motherboard manuals for specific installation instructions.

5.1インストールの準備

1. コンポーネントを収集します。 Ensure you have the Phanteks Revolt PSU, your chosen modular cables (not included), mounting screws, and your computer case.
2. 静電気放電: Ground yourself to prevent electrostatic discharge (ESD) by touching a grounded metal object before handling components.

5.2 電源の取り付け

1. PSU をマウントします。 Carefully slide the Phanteks Revolt PSU into the designated power supply bay in your computer case. Secure it with the provided screws.
2. モジュラーケーブルを接続します。 This PSU is fully modular. Connect only the necessary cables to the PSU's modular ports. Refer to the "Modular Cable Connectors" image in Section 4.2 for port identification.
   • Connect the 18+10pin cable to the motherboard.
   • Connect 8pin cables for CPU and PCIe as required by your motherboard and graphics card(s). The 12VHPWR connector is specifically for PCIe 5.0 GPUs.
   • Connect 6pin cables for SATA devices (SSDs, HDDs) and Molex peripherals.
3. ケーブルの配線: Route the connected cables neatly through your case for optimal airflow and aesthetics.
4. コンポーネントに接続します: Connect the other end of each modular cable to its respective component (motherboard, CPU, GPU, storage drives, etc.). Ensure all connections are firm and secure.
5. AC電源コード： Connect the provided C14-C13 AC power cord to the PSU's AC inlet. Do not connect to a wall outlet yet.

6. 操作手順

6.1 初期電源投入

1. After all internal connections are made and secured, connect the AC power cord from the PSU to a grounded wall outlet or surge protector.
2. Flip the main power switch on the rear of the PSU to the "ON" (I) position.
3. ケースの電源ボタンを使用してコンピュータ システムの電源を入れます。

6.2 Hybrid Fan Control

The Phanteks Revolt PSU features a 135mm Fluid Dynamic Bearing fan with hybrid fan control. A switch on the rear panel allows you to toggle between fan modes:

• Hybrid Mode (Default): The fan remains off under low loads for silent operation and only spins up when the power supply reaches a certain temperature or load threshold.
• 常時オンモード: The fan operates continuously, providing constant cooling. This mode may result in slightly higher noise levels but ensures maximum cooling performance.

Select the mode that best suits your preference for noise and cooling.

7。 トラブルシューティング

If your system does not power on or experiences instability, refer to the following common troubleshooting steps:

• 電源なし:
  • AC 電源コードが PSU と壁のコンセントの両方にしっかりと接続されていることを確認します。
  • Verify the main power switch on the PSU is in the "ON" (I) position.
  • Check the wall outlet or surge protector for power. Try a different outlet.
  • Use the included PSU tester to verify if the power supply is functioning independently.
• システムの不安定性/ランダムなシャットダウン:
  • Ensure all modular cables are firmly connected to both the PSU and the components. Loose connections can cause instability.
  • Verify that you are using the correct cables for each component (e.g., CPU power to CPU, PCIe power to GPU).
  • Check for any signs of overheating. Ensure proper airflow within your case.
  • If using the hybrid fan mode, try switching to "Always On" mode to see if it resolves temperature-related issues.
• ファンが回転しない:
  • In hybrid fan mode, the fan will not spin under low loads or temperatures. This is normal operation.
  • If the fan does not spin even under load or in "Always On" mode, contact Phanteks support.
• 焦げた臭いや煙:
  • Immediately disconnect the AC power cord from the wall outlet. Do not attempt to power on the system again.
  • Contact Phanteks support immediately.

For further assistance, please refer to the Phanteks support webサイトにアクセスするか、カスタマーサービスにお問い合わせください。

8. 仕様

9. 保証とサポート

9.1 製造元の保証

The Phanteks Revolt 1200W Power Supply Unit is covered by a 1年間のメーカー保証 ご購入日から1年間有効です。本保証は、通常の使用状況における材料および製造上の欠陥を対象としています。保証請求の際は、購入証明書を保管してください。

保証は、以下に起因する損傷をカバーしません。

• 不適切なインストールまたは操作。
• 許可されていない改造または修理。
• Accidental damage, abuse, or misuse.
• Natural disasters or external causes.

Opening the power supply unit will void the warranty.

9.2 テクニカルサポート

For technical assistance, troubleshooting, or warranty inquiries, please visit the official Phanteks webサイトにアクセスするか、カスタマー サポートにお問い合わせください。

Phanteks サポート Webサイト

Please have your product model number (PH-P1200PR_BK01C) and proof of purchase ready when contacting support.