導入
This manual provides essential information for the safe and efficient use of your Midea MF200D100W/T-SA Front Load Washer Dryer. Please read it thoroughly before installation, operation, and maintenance. Keep this manual for future reference.
フロント view of the Midea MF200D100W/T-SA Front Load Washer Dryer.
セットアップ手順
1. 開梱
Carefully remove all packaging materials. Ensure no components are left inside the drum. The power cord is included with the unit.
2. 場所の要件
Place the appliance on a firm, level surface. Ensure adequate ventilation around the unit. Avoid direct sunlight or extreme temperatures. Maintain a minimum clearance of 10 cm from walls or other appliances.
3. 水の接続
Connect the water inlet hose to a cold water tap and to the inlet valve on the back of the machine. Ensure connections are tight to prevent leaks. Position the drain hose into a standpipe or laundry tub, ensuring it is securely fastened to prevent dislodgement during operation.
4. 電源接続
Connect the power cord to a grounded 220 Volt, 50 Hz electrical outlet. Ensure the outlet is easily accessible. The appliance operates at 500 Watts.
5. 機器の水平調整
Use a spirit level to check if the machine is perfectly level. Adjust the leveling feet at the bottom of the appliance as needed. Proper leveling reduces vibration and noise during operation.
側 view of the Midea MF200D100W/T-SA Front Load Washer Dryer, showing leveling feet.
6. Initial Run
Before first use, run an empty wash cycle with a small amount of detergent to clean the drum and internal components.
操作手順
1.コントロールパネルオーバーview
The appliance features push-button controls for program selection and settings. Refer to the symbols on the control panel for specific functions.
2. 洗濯物を干す
Open the front door and load laundry into the drum. Do not overload the machine. The maximum washing capacity is 10 kg, and the maximum drying capacity is 7 kg. Ensure no items are caught in the door seal before closing.
3. 洗剤を追加する
Add the appropriate amount of detergent and fabric softener to the dispenser drawers. Consult your detergent packaging for recommended quantities.
4. プログラムの選択
Turn the program selector dial or press the program buttons to choose one of the 14 available wash programs. For drying, select the dedicated drying cycle (1 drying cycle available). Available cycle options include Drain, Spin, and Rinse.
5. サイクルの開始
Press the 'Start/Pause' button to begin the selected program. The machine will automatically proceed through the wash and dry phases (if a combined program is selected).
6.Wi-Fi接続
This model supports Wi-Fi connectivity. Refer to the separate Wi-Fi setup guide for instructions on connecting your appliance to your home network and using smart features.
7. チャイルドロック
The appliance is equipped with a child lock feature to prevent accidental operation. Consult the control panel instructions for activating and deactivating the child lock.
メンテナンス
1. ドラムのクリーニング
The stainless steel drum should be cleaned periodically. Use a dedicated washing machine cleaner or run a hot wash cycle with no laundry and a cup of white vinegar to remove residue and odors.
2. Cleaning Detergent Dispenser
Remove the detergent dispenser drawer and rinse it under running water to clear any detergent buildup. Clean the housing of the dispenser with a brush.
3. フィルターの清掃
Regularly check and clean the lint filter (for drying) and the drain pump filter (for washing) to ensure optimal performance and prevent blockages. Refer to the appliance diagrams for filter locations.
4. 外装クリーニング
機械の外側の表面を柔らかくて乾いた布で拭いてください。amp 布で拭いてください。仕上げを傷める可能性のある研磨剤入りの洗剤や溶剤は使用しないでください。
5. 冬季対策
If the appliance is to be stored in an unheated area, drain all water from the hoses and pump to prevent freezing and damage.
トラブルシューティング
サービスに連絡する前に、view 一般的な問題と解決策は次のとおりです。
- アプライアンスが起動しない: Ensure the power cord is securely plugged in, the door is fully closed, and the 'Start/Pause' button has been pressed. Check the circuit breaker.
- 水を入れない: 給水栓が開いているか、給水ホースが曲がったり詰まったりしていないか確認してください。
- 水漏れ: Verify that all hose connections are tight and the drain hose is correctly positioned. Check the detergent dispenser for overflow.
- 過度の振動/騒音: Ensure the appliance is level and all transit bolts (if any) have been removed. Check that the load is balanced inside the drum.
- エラーコード： If an error code appears on the display, consult the specific error code section in the full user manual (if provided separately) or contact customer support.
If the problem persists after attempting these solutions, please contact Midea customer service.
仕様
| 特徴 | 仕様 |
|---|---|
| ブランド | 美的 |
| モデル番号 | MF200D100W/T-SA |
| タイプ | フロントロード洗濯乾燥機 |
| 洗濯容量 | 10キロ |
| 乾燥能力 | 7キロ |
| 色 | 銀 |
| 製品寸法（奥行き×幅×高さ） | 44 cm x 59.5 cm x 85 cm |
| アイテム重量 | 33キロ |
| 巻tage | 220ボルト |
| 力 | 500ワット |
| 年間エネルギー消費量 | 417kWh |
| 洗濯回数 | 14 |
| 乾燥サイクル数 | 1 |
| 動作モード | 完全自動 |
| コントロールタイプ | プッシュボタン |
| 特集 | Child Lock, Wi-Fi |
| サイクルオプション | Drain, Spin, Rinse |
| ドラム素材 | ステンレス鋼 |
| 含まれるコンポーネント | 電源コード |
| エネルギー効率 | エナジースター準拠 |
保証とサポート
保証情報
This Midea MF200D100W/T-SA Front Load Washer Dryer comes with a manufacturer's warranty of two years from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects under normal use conditions.
カスタマーサポート
For technical assistance, service requests, or inquiries regarding your appliance, please contact Midea customer support. Contact details can typically be found on the Midea official webサイトまたは購入書類に記載されています。
When contacting support, please have your model number (MF200D100W/T-SA) and serial number ready.
