1.製品オーバーview
The SCULPFUN S30 Ultra 11W is a high-precision laser engraving and cutting machine designed for various materials including wood, metal, and acrylic. It features a large working area, smart air assist, and advanced safety mechanisms to ensure efficient and safe operation.
主な特徴:
- 11Wレーザー出力: Utilizes two enhanced 6W diodes for superior cutting and engraving capabilities.
- 広い作業エリア: An expansive 600x600mm (23.6"x23.6") work area, offering increased space for larger projects.
- 高精度: 0.08mm ultra-fine compression spot for delicate and clear engraving.
- 高速： Engraving speeds up to 400mm/s for improved efficiency.
- スマートエアアシスト： Automatic air assist control for cleaner cuts and engravings, activating for cutting and deactivating for engraving.
- 安全性の強化: Equipped with an emergency stop button, key lock, and limit switches for safe operation.
- 耐久性に優れたデザイン: Features an interchangeable lens design for extended laser module service life.
2. セットアップと組み立て
This section guides you through the initial setup and assembly of your SCULPFUN S30 Ultra 11W laser engraver. Please follow the steps carefully to ensure proper functionality and safety.
2.1 開梱とコンポーネントの確認
すべての部品を慎重に開梱し、梱包リストと照合してください。すべての部品が揃っていて、損傷がないことを確認してください。
2.2機械的組み立て
The engraver comes unassembled. Follow the detailed instructions provided in the physical manual for step-by-step assembly. The parts are individually wrapped and labeled to assist with this process.
オーバーview of the SCULPFUN S30 Ultra's main components and features, including the laser module, linear rail, and control panel.
2.3 ソフトウェアと接続性
The SCULPFUN S30 Ultra series is compatible with various software, including LightBurn and LaserGRBL. It supports multiple connection methods for flexible operation.
- ソフトウェアのインストール: Install your preferred laser control software (e.g., LightBurn, LaserGRBL) on your computer. Refer to the software's documentation for installation guides.
- Bluetooth ワイヤレス接続: Connect your engraver to your computer wirelessly via Bluetooth for convenient control.
- USBケーブル接続： For a stable wired connection, use the provided USB cable to connect the engraver to your computer.
- SDカード: Transfer design files directly to the engraver using an SD card for offline operation.
Illustration of the versatile connection options available for the SCULPFUN S30 Ultra, including Bluetooth, SD card, and USB cable.
2.4 レーザーの焦点合わせ
Proper focusing is crucial for optimal engraving and cutting results. Use the focusing column to set the correct distance between the laser module and the material surface.
- Place the focusing column on the material surface.
- Lower the laser module until it rests gently on the focusing column.
- Tighten the laser module's locking screw.
- Remove the focusing column.
3. 操作手順
This section provides guidance on operating your SCULPFUN S30 Ultra 11W for various tasks.
3.1 Powering On and Safety Features
Before starting any operation, ensure all safety measures are in place.
- Insert the key into the key lock and turn it to the ON position.
- 電源ボタンを押してマシンの電源を入れます。
- In case of emergency, press the red emergency stop button immediately.
Details of the upgraded safety features, including the emergency stop switch, key lock, and limit switches.
3.2 彫刻と切断
The S30 Ultra 11W is capable of both precise engraving and powerful cutting.
- マテリアルの配置: Place your material within the 600x600mm working area. For cutting, consider using a honeycomb workbed (sold separately) for optimal smoke exhaust and clean edges.
- デザインのインポート: Import your design into the laser control software.
- パラメータ設定： Adjust laser power, speed, and passes according to the material type and desired outcome.
- 運用開始： ソフトウェアから彫刻または切断プロセスを開始します。
Visual representation of the large 600x600mm working area, demonstrating its capacity for various projects.
3.3 Smart Air Assist Functionality
The integrated smart air assist system automatically optimizes airflow for different operations.
- 彫刻： Air assist automatically turns off to prevent material scorching and ensure fine detail.
- 切断： Air assist automatically turns on to blow away debris, resulting in cleaner and faster cuts.
Demonstration of the smart air assist system, showing the difference in cut quality with and without air assist.
An illustration detailing the intelligent air assist system, including its 32-bit mainboard and high airflow.
3.4 Performance Capabilities
- Cutting Power: Capable of cutting 10mm wood, 5mm acrylic, and 0.05mm steel in a single pass.
- 彫刻精度: 0.08mm ultra-fine compression spot ensures high detail.
- スピード： Engraving at 400mm/s, significantly faster than previous models.
Visual representation of the 11W laser's cutting capabilities on various materials like wood, acrylic, and steel.
Detailed explanation of the 11W laser output, showing how two 6W beams combine for stronger, faster, and higher cutting ability.
閉じる view demonstrating the highest accuracy engraving with the 0.08*0.1mm compressed laser spot.
Comparison of engraving and cutting speeds, highlighting the S30 Ultra's enhanced productivity.
Examples of engraving tasks and their completion times, showcasing the 200-250% enhancement in productivity.
3.5 公式製品ビデオ
4. メンテナンス
定期的なメンテナンスにより、レーザー彫刻機の寿命が長くなり、最適なパフォーマンスが確保されます。
4.1 Laser Module Lens Maintenance
The S30 Ultra features an interchangeable lens design, allowing you to restore laser power and extend the module's service life.
- Regularly inspect the lens for dust or debris.
- Clean the lens gently with a soft, lint-free cloth and appropriate lens cleaning solution.
- If the lens is damaged or its performance degrades, replace it with a spare lens from the repair kit.
Explanation of the replaceable lens feature, which helps maintain stable cutting performance and extends the laser's lifespan.
4.2 Air Nozzle Cleaning
Keep the air nozzle clean to ensure efficient air assist and prevent smoke accumulation.
- Use the provided air nozzle brush to clear any blockages or residue from the nozzle.
- Perform this cleaning regularly, especially after cutting operations that produce significant debris.
5。 トラブルシューティング
This section addresses common issues you might encounter with your SCULPFUN S30 Ultra 11W.
5.1 Laser Not Firing or Weak Output
- Check if the laser module is properly connected and powered.
- Ensure the key lock is in the ON position and the emergency stop button is not engaged.
- Verify laser power settings in your software.
- Inspect and clean the laser lens. Replace if damaged.
5.2 Inaccurate Engraving/Cutting
- 材料が平らで作業エリアにしっかりと置かれていることを確認します。
- Verify the laser is correctly focused.
- Check for any loose belts or mechanical components that might affect movement.
- Confirm software settings (speed, power, steps per mm) are appropriate for the material.
5.3 Air Assist Malfunction
- Check if the air pump is connected and powered.
- エアホースが曲がったり詰まったりしていないことを確認してください。
- Clean the air nozzle for any obstructions.
5.4 接続の問題
- For USB connection, try a different USB port or cable.
- For Bluetooth, ensure the device's Bluetooth is enabled and paired correctly.
- Restart both the engraver and your computer.
6. 仕様
| 特徴 | 仕様 |
|---|---|
| モデル | S30 Ultra 11W |
| レーザー出力 | 11W |
| 作業エリア | 600 x 600 mm（23.6インチ x 23.6インチ） |
| 彫刻精度 | 0.08ミリメートル |
| 彫刻速度 | 最大400mm/s |
| レーザークラス | 4 |
| アイテム重量 | 20.8ポンド |
| 製品寸法 | 28 x 28 x 2.8インチ |
| メーカー | スカルファン |
| エアアシスト | Automatic (32-bit air assist motherboard) |
| 安全機能 | Emergency Stop Button, Key Lock, Limit Switches |
| 接続性 | Bluetooth, SD Card, USB Cable |
| モーター | Upgraded 4.2KG.CM Stepper Motor |
| レーザーモジュールの寿命 | 10x longer with interchangeable lens design |
7. 保証とサポート
SCULPFUN is committed to providing excellent customer service and product support.
- 保証： SCULPFUN provides a 2-year free warranty service for the S30 Ultra 11W laser engraver.
- サポートへのお問い合わせ: If you have any questions, encounter issues, or require assistance, please contact SCULPFUN customer service. They are dedicated to providing satisfactory solutions.