Firecore F94T-XG 3 X 360 Laser Level and FT1500D Tripod User Manual

1. はじめに

Thank you for choosing the Firecore F94T-XG 3 X 360 Laser Level and FT1500D Tripod. This comprehensive system provides an all-in-one leveling and alignment solution for various applications. The F94T-XG laser level projects three 360° green laser planes, offering superior visibility and precision for tasks such as aligning, leveling, plumbing, and squaring. Paired with the adjustable FT1500D aluminum alloy tripod, this kit ensures stable and accurate measurements for both interior and exterior projects. Please read this manual thoroughly before operation to ensure safe and effective use of your new tool.

2. 安全情報

WARNING: Read and understand all safety warnings and instructions before operating this laser level. Failure to follow the warnings and instructions may result in serious injury.

2.1 レーザーの安全性

This product is a Class II laser product, with a power output of less than 1mW and a wavelength of 505-520nm. Direct eye exposure to the laser beam should be avoided.

• レーザー光線を直接見つめないでください。
• レーザー光線を意図的に他の人や反射面に向けないでください。
• 可燃性の液体、ガス、粉塵などが存在する爆発性雰囲気内ではレーザーレベルを操作しないでください。
• レーザーレベルは子供の手の届かないところに保管してください。
• 指定された電池と充電方法のみを使用してください。

2.2 一般的な安全性

• Always ensure the work area is clear and well-lit.
• Do not modify the laser level or tripod.
• Protect the device from extreme temperatures, water, and impact.
• Clean the laser level with a soft, dry cloth. Do not use solvents.

3. パッケージ内容

The Firecore F94T-XG Laser Level and FT1500D Tripod kit includes the following items:

• Firecore F94T-XG 3 X 360 Laser Level
• Firecore FT1500D 60-inch Aluminum Alloy Laser Tripod
• 2 x 7.4V / 2600mAh Rechargeable Li-ion Batteries
• Type-C充電ケーブルと電源アダプター
• 磁気ピボットベース
• グリーンターゲットプレート
• ユーザーマニュアル
• Carrying Case for Laser Level
• Shoulder Strap Bag for Tripod

4.製品オーバーview

4.1 Firecore F94T-XG Laser Level

The F94T-XG is a robust and precise laser level designed for demanding job sites. It features an over-molded housing and IP65 water/dust resistance for durability.

• 3 x 360°グリーンレーザーライン: One horizontal and two vertical planes for full room coverage.
• 高い視認性: Green beams are up to 4X brighter than standard red beams.
• スマート振り子システム: Self-levels within ±4° in 3 seconds and indicates out-of-level conditions.
• パルスモード： Extends working range up to 197 ft (60m) with a Firecore FD30 laser detector.
• 一体型磁気ブラケット: Features 1/4 in. and 5/8 in. threads for versatile mounting.
• Disturbance Monitor: High-precision electronic motion sensor alerts if the tool position changes, ensuring consistent accuracy.

4.2 Firecore FT1500D Laser Tripod

The FT1500D tripod provides a stable and adjustable platform for your laser level, suitable for various applications.

• 高さ調節可能： Expands from 20 inches to 60 inches (50 cm to 150 cm).
• 材料： Crafted from quality aluminum for durability and lightweight portability.
• ヘッドデザイン: Flat head with 1/4-inch x 20 threaded studs, compatible with the F94T-XG.
• クイックリリースClamps: For easy and secure leg adjustments.

5. セットアップ

5.1 バッテリーの取り付けと充電

The F94T-XG uses two 7.4V / 2600mAh rechargeable Li-ion batteries.

1. レーザー レベルの背面にある電池ボックスのカバーを開きます。
2. Insert the rechargeable Li-ion battery packs, ensuring correct polarity.
3. 電池カバーをしっかりと閉じてください。
4. To charge, connect the Type-C charging cable to the battery pack (if charging separately) or directly to the laser level. Connect the power adapter to a suitable power outlet. The charging indicator will show charging status.

5.2 Attaching Laser Level to Tripod

The FT1500D tripod features both 1/4-inch and 5/8-inch mounting threads for compatibility.

1. Extend the tripod legs and central column to your desired height. Use the quick-release clampそれらを確保するためです。
2. Place the F94T-XG laser level onto the tripod head. The laser level's base has a 1/4-inch thread.
3. Secure the laser level by rotating the mounting screw on the tripod head until it is firmly attached.

6. 操作手順

6.1 電源オンとセルフレベリングモード

The F94T-XG features a Smart Pendulum System for automatic leveling.

1. 振り子ロックスイッチをロック解除の位置にスライドさせて、振り子のロックを解除します。
2. Press the power button to turn on the laser level. The laser lines will activate.
3. Place the laser level on a stable surface or tripod. The Smart Pendulum System will automatically self-level within ±4°.
4. If the device is out of its self-leveling range, the laser lines will flash rapidly to indicate an out-of-level condition. Adjust the position of the laser level until the lines stop flashing and become steady.

6.2 Manual Mode (Locking Lines)

For applications requiring lines at an angle, you can lock the pendulum.

1. With the pendulum lock switch in the locked position, press and hold the power button for a few seconds to activate Manual Mode.
2. The laser lines will turn on and remain steady, allowing you to project lines at any desired angle. The out-of-level alarm will be deactivated in this mode.

6.3 Pulse Mode (Detector Use)

Pulse mode extends the working range of the laser level, especially in bright lighting or outdoor conditions, when used with a compatible laser detector (e.g., Firecore FD30).

1. In self-leveling mode, press the dedicated Pulse Mode button (if available, or cycle through modes) to activate Pulse Mode. The laser lines may appear dimmer to the naked eye but will be detectable by the receiver.
2. Follow the instructions for your specific laser detector to locate the laser line at extended distances.

6.4 アプリケーション

The Firecore F94T-XG is versatile for various professional and DIY applications.

• Room layout and partitioning
• Alignment of conduit, lighting, and fixtures
• Flooring and tiling installation
• Drywall and window framing
• Cabinet and shelf installation

7. メンテナンス

7.1 クリーニング

• Regularly clean the laser level and tripod with a soft, dry cloth.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the housing or optical components.
• Keep the laser apertures clean to ensure clear and accurate laser lines.

7.2 ストレージ

• Always lock the pendulum before storing or transporting the laser level to prevent damage to the internal mechanism.
• Store the laser level and tripod in their respective carrying cases when not in use.
• 直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
• If storing for extended periods, remove the batteries from the laser level.

7.3バッテリーケア

• 初めて使用する前に、バッテリーを完全に充電してください。
• Do not expose batteries to excessive heat or direct flame.
• 地域の規制に従ってバッテリーを廃棄してください。

8。 トラブルシューティング

If you encounter issues with your Firecore F94T-XG laser level, refer to the table below for common problems and solutions.

9. 仕様

10. 保証とサポート

Firecore products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Firecore website. If you have any questions, require technical assistance, or need to report an issue, please contact Firecore customer support through the following channels:

• 正式 Webサイト： www.firecoretools.com （元ample, actual link not provided in data)
• メールサポート: 製品のパッケージまたは公式 web連絡先メールアドレスのサイト。
• Amazonストア: 訪問する AmazonのFirecoreストア 製品情報およびサポート オプションについては、こちらをご覧ください。

Please have your model number (F94T-XG) and purchase date ready when contacting support.