MOUNT PRO B0CBTP6HYC

MOUNT PRO Dual Monitor Stand Instruction Manual

Model: B0CBTP6HYC

導入

This manual provides detailed instructions for the installation, operation, and maintenance of your MOUNT PRO Dual Monitor Stand. Please read these instructions carefully before assembly and use to ensure proper function and safety.

The MOUNT PRO Dual Monitor Stand is designed to securely hold two computer screens ranging from 22 to 42 inches, with a maximum weight capacity of 33 lbs per monitor. It supports VESA mounting patterns of 75x75mm or 100x100mm.

セットアップとインストール

The MOUNT PRO Dual Monitor Stand offers two primary installation methods: C-clamp mounting and grommet mounting. Choose the method that best suits your desk type.

1. Check Monitor Compatibility

Ensure your monitors are compatible with the stand's specifications:

  • 画面サイズ: 22～42インチ
  • 重量容量: Up to 33 lbs per monitor
  • VESAパターン: 75x75mmまたは100x100mm

For monitors without VESA holes, a VESA adapter (sold separately) may be required.

Diagram showing VESA hole patterns on the back of a monitor and how to remove an original stand.
Figure 1: VESA Compatibility Check. This image illustrates how to identify VESA mounting holes on a monitor and suggests removing the original stand if necessary.

2. 取り付けオプションを選択する

The stand supports two mounting types:

  • C-Clamp 取り付け: Suitable for desk thickness from 0.4" to 1.97". This method requires no drilling.
  • グロメット取り付け: Suitable for desk thickness from 0.4" to 3.15". Requires a desk hole diameter of 0.4" to 2.4".

Important: Do not install on tempered glass table tops.

2つのインストールオプションを示す画像: C-clamp mounting and grommet mounting, with desk thickness requirements.
Figure 2: Two Installation Options. This image displays the C-clamp method (top) and the grommet method (bottom) for attaching the monitor stand to a desk, along with their respective desk thickness and hole diameter specifications.
Diagram illustrating compatible and incompatible desk types for C-clamp mounting, including warnings against tempered glass.
Figure 3: Desk Compatibility for C-Clamp. This diagram shows various desk edge configurations, indicating which are suitable for C-clamp mounting and explicitly warns against using the mount on tempered glass surfaces.

3. モニターの取り付け

The VESA plate is detachable for easy assembly. Attach the VESA plate to the back of your monitor using the provided screws, then slide the monitor onto the arm head until it locks securely.

Image showing a person attaching a monitor to the stand, highlighting the detachable VESA plate for easy assembly.
Figure 4: Effortless Assembly. This image demonstrates the process of attaching a monitor to the stand using the detachable VESA plate, emphasizing the ease of installation.
Diagram showing how to easily lock the monitor onto the arm head without additional operations.
Figure 5: Easy Monitor Locking. This diagram illustrates how the monitor slides onto the arm head and automatically locks into place, simplifying the attachment process.

運営と調整

The MOUNT PRO Dual Monitor Stand features gas spring arms for flexible and ergonomic adjustments.

1. Flexible Screen Adjustment

Adjust your monitors to achieve optimal viewing angles and ergonomic positions. The arms allow for:

  • +90° から -45°
  • スイベル: 180°
  • 回転： 360° (for landscape or portrait viewing)
  • 最大延長: 最大23.58インチ
  • 最大高さ: 最大19.69インチ
Diagram illustrating the flexible screen adjustment capabilities: swivel, tilt, and rotation, along with maximum height and extension.
Figure 6: Flexible Screen Adjustment. This diagram shows the range of motion for swivel (180°), tilt (+90°/-45°), and rotation (360°), as well as the maximum extension (23.58") and height (19.69") of the monitor arms.
Image showing various screen combinations and orientations possible with the dual monitor stand.
Figure 7: Multiple Screen Combinations. This image illustrates different display configurations possible with the dual monitor stand, including side-by-side, stacked, and angled setups.

2. Tilt and Tension Adjustment

To adjust the tilt and gas spring tension:

  1. 傾き調整： Loosen the tilting bolt (turn in "+" direction), adjust your monitor to the desired tilt angle, then retighten the tilting bolt (turn in "-" direction).
  2. 張力調整: Keep the arm in a horizontal position during adjustment.
    • If the monitor raises up, turn clockwise ("-" direction) to reduce tension for lighter monitors.
    • If the monitor falls down, turn counter-clockwise ("+" direction) to increase tension for heavier monitors.
Diagram showing how to adjust tilt and gas spring tension for the monitor arm.
Figure 8: Tilt and Tension Adjustment. This diagram illustrates the steps for adjusting the monitor's tilt and the gas spring tension to accommodate different monitor weights and desired positions.

メンテナンス

Regular maintenance helps ensure the longevity and optimal performance of your monitor stand.

1.ケーブル管理

Utilize the integrated cable management system to keep your workspace tidy and prevent cable damage. Route cables along the arms and through the designated channels.

Image showing the integrated cable management system on the monitor arm, with cables routed neatly.
Figure 9: Cable Management. This image highlights the hidden cable design, demonstrating how cables can be routed through the monitor arm for a clean and organized desktop.

2. 清掃

スタンドを柔らかくて乾いた布で拭いてください。amp 布で拭いてください。仕上げを傷める可能性のある研磨剤入りの洗剤や溶剤の使用は避けてください。

トラブルシューティング

このセクションでは、モニター スタンドで発生する可能性のある一般的な問題について説明します。

  • モニターがたわんだり、所定の位置に留まらない場合: This indicates that the gas spring tension needs adjustment. Refer to the "Tension Adjustment" instructions in the Operating section. Ensure the arm is held horizontally during adjustment.
  • モニターの移動が難しい: The gas spring tension might be too high. Refer to the "Tension Adjustment" instructions to reduce tension.
  • Monitor Does Not Tilt: Ensure the tilting bolt is sufficiently loosened before attempting to adjust the tilt. Retighten after achieving the desired angle.
  • スタンドが不安定: C-clを確認するamp or grommet mount is securely tightened to the desk. Check desk compatibility to ensure it meets the thickness and material requirements.
  • Cables are Disorganized: Utilize the integrated cable management channels along the arms to route and secure your cables.

仕様

特徴詳細
ブランドマウントプロ
モデルB0CBTP6HYC
モニターサイズの互換性22" to 42" (Ultrawide)
重量容量6.6 lbs to 33 lbs per monitor
VESA互換性75x75mm、100x100mm
取り付けタイプ卓上マウント（C-Clamp またはグロメット）
移動タイプ回転、旋回、傾斜、関節可動
傾斜範囲+90° から -45°
スイベル範囲180°
回転範囲360°
最大延長23.58インチ
最高の高さ19.69インチ
材料金属（アルミニウム）
色黒
アイテム重量14.52ポンド
MOUNT PRO Dual Monitor Stand holding two ultrawide monitors, with key specifications overlaid: VESA, weight, and screen size.
図10：製品オーバーview with Specifications. This image shows the MOUNT PRO Dual Monitor Stand in use, highlighting its compatibility with 22"-42" monitors, 6.6-33 lbs weight capacity, and 75x75mm/100x100mm VESA patterns.
Image showing the MOUNT PRO Dual Monitor Stand supporting two large ultrawide monitors, emphasizing its heavy-duty design.
Figure 11: Design for Heavier Monitors. This image illustrates the stand's capability to support two large monitors, up to 42 inches and 33 lbs each, with VESA compatibility of 75x75mm or 100x100mm.
Diagram showing the recommended distance between the screen and wall for various monitor sizes when using the stand.
Figure 12: Screen to Wall Distance Guide. This diagram provides a table of recommended distances from the screen to the wall for different monitor sizes (15" to 42") to ensure proper clearance and movement.

保証情報

Specific warranty details are not provided in the product information. Please refer to the product packaging or contact MOUNT PRO customer support for warranty terms and conditions.

カスタマーサポート

For technical assistance, missing parts, or any inquiries regarding your MOUNT PRO Dual Monitor Stand, please contact MOUNT PRO customer support through their official web製品を購入したサイトまたは小売店。

製品ビデオ

Extra Wide Monitor Stand Overview

This video provides a demonstration of the MOUNT PRO Dual Monitor Stand, showcasing its ability to hold an extra-wide monitor and highlighting its adjustable features and cable management capabilities. The video illustrates the stability and flexibility of the stand for large displays.

© 2023 MOUNT PRO. All rights reserved.

関連文書 - B0CBTP6HYC

前view VIVO デュアルモニターデスクマウント STAND-V002T/W 取扱説明書
VIVOデュアルモニターデスクマウント（モデル：STAND-V002T/W）の取扱説明書。取り付け方法、パッケージ内容、注意事項、2台のモニターの取り付け調整方法について詳しく説明しています。安全に関するガイドラインとサポート連絡先情報も含まれています。
前view プレミアムシングルモニタースタンド取扱説明書
MOUNT PRO プレミアム シングル モニター スタンドの包括的な取扱説明書。組み立て手順、VESA 取り付けオプション、ガススプリング張力調整、ケーブル管理、最大 33 ポンドのモニターの安全ガイドラインが詳細に記載されています。
前view Pixio PS2SINGLE プレミアム シングル モニター スタンド 設置ガイド
Comprehensive installation guide for the Pixio PS2SINGLE Premium Single Monitor Stand, detailing safety, VESA compatibility (75x75, 100x100), and setup for monitors up to 49 inches.
前view ONKRON TS2080 モバイル テレビ スタンド ユーザー マニュアル
Comprehensive user manual for the ONKRON TS2080 mobile TV stand, detailing assembly, operation, safety, and warranty information. Supports screen sizes from 60" to 120" with adjustable height and VESA compatibility.
前view ARES WING 高耐久性モニターアーム 取り付けマニュアル
ARES WING ヘビーデューティーカウンターバランスモニターアーム（モデルGDT1004）の包括的な設置ガイド。このマニュアルでは、VESA互換性チェック、クランプ取り付け、取り付け手順など、セットアップに必要な手順をステップバイステップで説明しています。amp グロメットの取り付け、アームの調整方法などの詳細が記載されています。また、重要な安全情報とよくある質問も記載されています。
前view WALI M004 クアッドモニターデスクマウント設置マニュアル
WALI M004 クアッド モニター デスク マウントの包括的なインストール ガイド。最大 4 台のモニターを取り付けるためのセットアップ、部品、安全手順について詳しく説明しています。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.