Zopsc FireWire Video Capture PCIe Card User Manual

1. はじめに

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Zopsc FireWire Video Capture PCIe Card. This IEEE 1394a controller is designed to expand your desktop PC's connectivity, enabling high-speed data transfer up to 2.5Gbps for various FireWire devices. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

2 製品の特徴

• Simultaneous connection of multiple high-performance devices.
• Supports hot-swapping and plug-and-play connection of peripheral devices.
• Compatible with various FireWire 800 (1394b) and 1394a devices, including portable hard disks, DV camcorders, digital cameras, CD-RW/DVD-ROM drives, and other audio/video equipment.
• Compliant with IEEE 1394-1995 for a high-performance serial bus and IEEE 1394a-2000 standard.
• Compliant with PCI-Express Revision 1.0a.
• Compliant with IEEE 1394 OpenHCI Specifications V1.1 and V1.2.
• Features a 1-Lane (x1) PCI-Express interface with a transfer rate of 2.5Gb/s full duplex channel.
• Supports provisions of IEEE P1394b Revision 1.33+.
• Fully backward compatible with 1394a specification.
• Fully interoperable with FireWire, iLink, and SB1394 implementations of the IEEE 1394 Standard.

3. パッケージ内容

Please verify that all items are present and in good condition. If any items are missing or damaged, contact your retailer.

• 1 x Zopsc FireWire Video Capture PCIe Controller Card
• 1 x FireWireケーブル

Image: The Zopsc FireWire Video Capture PCIe Card and the included FireWire cable.

4. 仕様

画像: 上 view of the PCIe card, highlighting the FireWire ports and main components.

5. セットアップ手順

Follow these steps to install the FireWire Video Capture PCIe Card into your desktop computer.

1. 電源を切ってプラグを抜きます: コンピュータを完全にシャットダウンし、電源コードを壁のコンセントから抜きます。
2. コンピュータケースを開く: 内部コンポーネントにアクセスするには、コンピューター ケースのサイド パネルを取り外します。
3. 利用可能な PCIe スロットを見つけます。 Identify an empty PCI Express (PCIe x1 or larger) slot on your motherboard. Refer to your computer's motherboard manual if you are unsure.
4. スロットカバーを取り外す: Carefully remove the metal slot cover corresponding to the chosen PCIe slot from the back of your computer case.
5. PCIe カードを挿入します。 Align the FireWire PCIe card with the chosen slot and firmly press it down until it is securely seated. Ensure the metal bracket is flush with the back of the case.
6. カードを安全に保管する: Use a screw to secure the card's metal bracket to the computer case.
7. コンピュータケースを閉じる: コンピューターケースのサイドパネルを取り付けて固定します。
8. 電源を再接続します: 電源コードを壁のコンセントに差し込み、コンピューターの電源を入れます。
9. ドライバーのインストール:
   • For most modern operating systems (Windows 10/8/7, OS X), the necessary drivers should install automatically upon startup (Plug-and-Play).
   • If drivers do not install automatically, check the manufacturer's website (Zopsc) for the latest driver downloads for your specific operating system.

画像: クローズアップ view of the FireWire ports on the PCIe card, ready for connection.

6. 操作手順

Once the FireWire PCIe card is installed and drivers are recognized, you can connect your FireWire devices.

1. Connect FireWire Device: Use the provided FireWire cable or another compatible FireWire cable to connect your device (e.g., DV camcorder, external hard drive) to one of the FireWire ports on the installed PCIe card.
2. パワーオンデバイス： Ensure your FireWire device is powered on.
3. デバイス認識: Your operating system should detect the connected FireWire device. You may see a notification indicating a new device has been found.
4. Use with Software: Open the appropriate software application on your computer (e.g., video editing software for camcorders, file explorer for external drives) to access and manage your FireWire device.
5. ホットスワップ: The card supports hot-swapping. You can connect and disconnect FireWire devices while the computer is running, but it is always recommended to safely eject or unmount devices before disconnecting to prevent data loss.

7. メンテナンス

The Zopsc FireWire Video Capture PCIe Card requires minimal maintenance.

• 清潔に保ちます： Ensure your computer's interior is kept clean and free of dust to prevent overheating and component damage. Use compressed air to gently clean the card and surrounding areas periodically.
• ドライバーの更新： Periodically check the Zopsc web最適なパフォーマンスと最新のオペレーティング システム バージョンとの互換性を確保するには、更新されたドライバーのサイトを参照してください。
• 取り扱いにはご注意ください: When handling the card, always hold it by its edges to avoid touching the electronic components or connectors. Static electricity can damage the card.

8。 トラブルシューティング

If you encounter issues with your FireWire PCIe card, refer to the following common problems and solutions.

• カードが検出されません:
  • カードが PCIe スロットに完全に装着されていることを確認します。
  • 可能であれば、別の PCIe スロットにカードをインストールしてみてください。
  • Verify that the slot is enabled in your computer's BIOS/UEFI settings (if applicable).
  • Check Device Manager (Windows) or System Information (OS X) to see if the card is listed, even with an error.
• デバイスが認識されません:
  • Ensure the FireWire device is powered on and connected correctly to the card.
  • Try a different FireWire cable.
  • Verify that the necessary drivers for the FireWire card are installed and up to date.
  • Check if the FireWire device itself requires specific drivers or software.
• データ転送が遅い:
  • Ensure you are using a FireWire 800 (1394b) compatible cable and device for maximum speed, if applicable.
  • システム リソースを消費する可能性のある、バックグラウンドで実行されている不要なアプリケーションを閉じます。
  • Check for updated drivers for both the FireWire card and the connected device.
• システムの不安定性:
  • カードが正しく取り付けられ、固定されていることを確認してください。
  • マザーボードの BIOS/UEFI を最新バージョンに更新します。
  • If issues persist, temporarily remove the card to see if the system stabilizes, indicating a potential conflict or faulty card.

9. 保証とサポート

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official Zopsc webサイト。

Visit the Zopsc Store on Amazon