導入
Thank you for choosing the KEPLUG 8.7-inch Wired Motion Sensor LED Ceiling Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. This product features a built-in motion and light sensor, adjustable color temperature, and multiple operating modes, designed for various indoor applications.
Image: Two KEPLUG 8.7-inch wired motion sensor LED ceiling lights, showcasing their round, flush-mount design and integrated sensor modules.
セットアップとインストール
This KEPLUG LED ceiling light is designed for hardwired installation on either ceilings or walls. Please ensure the power supply is turned off at the circuit breaker before beginning installation. It is recommended that installation be performed by a qualified electrician.
インストール前の手順:
- 色温度を選択します: Before mounting, locate the color temperature switch on the back of the light fixture. Slide the switch to select your desired color temperature: 3000K (Warm White), 4000K (Natural White), or 6000K (Cool White). This setting cannot be changed after installation without removing the fixture.
- ツールを集める: Ensure you have the necessary tools, including a screwdriver, wire strippers, and electrical tape.
インストール手順:
- 取り付けブラケットの取り付け: Secure the provided mounting bracket to the ceiling or wall junction box using the screws and anchors. Ensure the bracket is firmly attached and level.
- 配線を接続: Connect the household electrical wires to the corresponding wires on the light fixture using the provided wire nuts. Typically, black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground). Ensure all connections are secure.
- 照明器具を取り付ける: Align the light fixture with the installed mounting bracket. Push the fixture upwards and twist clockwise until it locks securely into place. Ensure the fixture is flush against the mounting surface.
- 電力を回復する： 器具がしっかりと取り付けられたら、回路ブレーカーで電源を復旧します。
Image: Illustration showing the mounting bracket being secured to the ceiling with screws and anchors.
Image: Hands demonstrating the easy lock installation method, showing the light fixture being twisted onto the mounting bracket.
操作手順
Your KEPLUG motion sensor LED ceiling light offers adjustable settings for optimal performance.
動作モード:
The light fixture features a slide switch on the side to select between three operating modes:
- オンモード： The light functions as a standard ceiling lamp, remaining continuously on. It can be controlled via your wall switch. Motion sensing is disabled in this mode.
- オフモード： ライトが消えます。
- 自動モード： This mode activates the motion and light sensors. The light will turn on automatically when motion is detected in low ambient light conditions.
Image: Visual representation of the three operating modes (ON, OFF, AUTO) and how they affect the light's behavior based on ambient light and motion.
Motion Sensor Functionality (AUTO Mode):
In AUTO mode, the built-in microwave motion sensor detects movement within a 120-degree angle and a range of 9-18 feet. The light will activate when motion is detected and the ambient light is low. After motion ceases, the light will remain on for a set duration before automatically turning off.
調整可能なタイマー設定:
The light offers three adjustable timer settings for how long it remains on after motion is no longer detected:
- 30秒
- 120秒
- 180秒
To adjust the timer, locate the small slide switch next to the motion sensor on the light fixture and select your preferred duration.
Image: Illustration detailing the motion sensor's detection angle and range, along with the switch for selecting the 30s, 120s, or 180s auto-off timer.
色温度の選択:
As mentioned in the setup, the color temperature (3000K Warm White, 4000K Natural White, 6000K Cool White) is selected via a switch on the back of the fixture prior to installation.
Image: A visual comparison of the three selectable color temperatures: 3000K Warm White, 4000K Natural White, and 6000K Cool White, as emitted by the light fixture.
メンテナンス
To ensure the longevity and optimal performance of your KEPLUG LED ceiling light, follow these simple maintenance guidelines:
- クリーニング： Disconnect power to the fixture before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface of the light. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electronic components.
- 検査： Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, consult a qualified electrician.
- 電球の交換: This fixture uses integrated LED technology, meaning the LED bulbs are not user-replaceable. The LEDs are designed for a long lifespan (over 30,000 hours).
トラブルシューティング
If you encounter issues with your KEPLUG motion sensor LED ceiling light, refer to the following common problems and solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ライトが点灯しません。 | 電源がありません。 間違ったモードが選択されました。 Sufficient ambient light (in AUTO mode). | 回路ブレーカーと壁のスイッチを確認してください。 Ensure the mode switch is set to 'ON' or 'AUTO'. In 'AUTO' mode, the light will only activate in low light conditions. Test in a darker environment. |
| モーションセンサーが動きを検出しません。 | Light is not in 'AUTO' mode. 検出エリア内に障害物があります。 周囲の光が強すぎます。 動きが検出範囲/角度外です。 | Ensure the mode switch is set to 'AUTO'. センサーを遮る物体を取り除いてください view. The sensor is designed to activate in low light. If the area is bright, it will not turn on. Ensure motion occurs within the 9-18 feet range and 120-degree angle. |
| Light turns off too quickly or stays on too long. | タイマー設定が正しくありません。 | Adjust the timer switch on the fixture to 30s, 120s, or 180s as desired. |
| Difficulty with mounting. | Mounting surface is not flat. | Ensure the ceiling or wall surface is perfectly flat for proper alignment and secure attachment of the fixture. |
製品仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | ケプラグ |
| モデル名 | motion sensor ceiling light |
| 製品寸法 | 8.66"L x 8.66"W x 1.11"H (22cm diameter, 2.5cm thickness) |
| アイテム重量 | 2.01 ポンド (0.91 キログラム) |
| ワットtage | 18ワット |
| 輝度 | 1600ルーメン |
| 色温度 | 3000K (Warm White), 4000K (Natural White), 6000K (Cool White) - Adjustable |
| 電源 | AC（有線） |
| 巻tage | 110ボルト |
| 特集 | Adjustable Color Temperature, Energy Efficient, Motion Sensor, Timer, Water Resistant |
| モーションセンサー検出角度 | 120度 |
| モーションセンサー検出範囲 | 9～18フィート（約3～5メートル） |
| インストールタイプ | フラッシュマウント |
| 材料 | ABSプラスチック |
| 屋内/屋外での使用 | 屋内 |
| 寿命 | 30,000時間以上 |
| 含まれるコンポーネント | 取り付け金具 |
Image: Technical drawing illustrating the dimensions of the KEPLUG ceiling light, showing a diameter of 22cm and a thickness of 2.5cm.
保証情報
For detailed warranty information regarding your KEPLUG Motion Sensor LED Ceiling Light, please refer to the product packaging or contact KEPLUG customer support directly. Warranty terms and conditions may vary.
カスタマーサポート
If you have any questions, require technical assistance, or need further support with your KEPLUG product, please contact KEPLUG customer service through the retailer's platform or the official KEPLUG webサイトをご覧ください。サポートにお問い合わせの際は、製品のモデル番号と購入日をご用意ください。