Alpine S2-S65C 次世代 S シリーズ 6.5 インチ コンポーネント スピーカー セット ユーザー マニュアル

導入

This manual provides detailed instructions for the installation, operation, and maintenance of your Alpine S2-S65C Next-Generation S-Series 6.5" Component Speaker Set. Please read this manual thoroughly before attempting installation or operation to ensure proper use and optimal performance. Keep this manual for future reference.

Image: The Alpine S2-S65C component speaker set, featuring two 6.5-inch woofers and two tweeters.

安全情報

怪我や製品および車両の損傷を防ぐために、常に次の安全上の注意事項を守ってください。

• 専門家による取り付けを推奨: 最適なパフォーマンスと安全性を確保するため、資格のある技術者による専門的な設置を強くお勧めします。
• バッテリーを外します: Before starting any electrical work, disconnect the vehicle's negative battery terminal to prevent electrical shorts and damage.
• 適切な配線: Ensure all wiring connections are secure and correctly insulated to prevent short circuits. Use appropriate gauge wiring for power and speaker connections.
• セキュリティの強化: 車両の運転中に部品が緩んで怪我や損傷の原因となることがないように、すべての部品をしっかりと取り付けてください。
• 障害物を避ける: エアバッグ、運転者の視界、または車両の制御を妨げる場所にスピーカーを設置しないでください。
• 音量コントロール: 長時間大音量で聴くと聴覚障害を引き起こす可能性があります。安全で快適な音量に調整してください。

パッケージ内容

パッケージにすべてのアイテムが揃っていることを確認します。

• Two (2) 6.5" Woofers (S2-S65C)
• Two (2) 1" Tweeters with threaded removable housing
• Two (2) In-line Crossovers
• Mounting Hardware for Tweeters
• Wiring for Tweeters
• 取扱説明書（本書）

製品の特徴

• ハイレゾオーディオ認定: The S2-S65C speakers are Hi-Res Audio Certified, capable of reproducing frequencies up to 40kHz for accurate and natural sound reproduction.
• 信頼性の高いパフォーマンス: Constructed with a blend of Poly Propylene, Glass Fiber, and Mica Cone materials, these speakers offer lightweight design, high output, and low distortion for clear audio.
  

  画像: クローズアップ view of the S2-S65C woofer cone, highlighting its textured surface and durable construction.

• HAMR Surround Technology: Alpine's High Amplitude Multi-Roll (HAMR) surround technology allows for maximum cone movement, delivering powerful and accurate bass.
  

  画像: 詳細 view of the HAMR surround on the S2-S65C woofer, designed for extended cone excursion.

• Enhanced Component Design: Features 6.5" woofers and 1" tweeters with a peak power of 240W and RMS power of 80W. OEM fitment design and in-line crossovers facilitate seamless integration.
  

  画像: 背面 view of the S2-S65C woofer, showing the speaker terminals and magnet structure.
  

  Image: Close-up of an S2-S65C tweeter, showing its protective grille and compact design.

• Speaker Grille Compatibility: Compatible with the KTE-S65G Speaker Grille (sold separately) for protection and enhanced visual appeal.
  

  Image: An S2-S65C woofer shown with the optional KTE-S65G speaker grille installed, providing protection.

セットアップとインストール

This section provides general guidelines for installing your Alpine S2-S65C component speakers. Specific vehicle requirements may vary. Consult your vehicle's service manual or a professional installer for detailed instructions.

1. 計画: Determine the optimal mounting locations for the woofers and tweeters in your vehicle. Consider factory speaker locations or custom mounting options.
2. 準備： Gather all necessary tools, wiring, and mounting hardware. Disconnect the vehicle's negative battery terminal.
3. ウーファーの取り付け:
   • Remove existing speakers from the desired location.
   • Mount the S2-S65C woofers securely using appropriate screws and adapters if needed. Ensure a tight seal to maximize bass response.
   • Connect the woofer wires to the vehicle's speaker wiring, observing correct polarity (+ to + and - to -).
4. ツイーターの取り付け:
   • Choose a mounting method for the tweeters (flush mount, surface mount, or factory location). The threaded removable housing allows for flexible installation.
   • Install the tweeters in the chosen location, ensuring they are aimed towards the listening area for optimal sound imaging.
   • Connect the tweeter wires to the in-line crossovers, then connect the crossovers to the amplifier or head unit's tweeter output.
5. クロスオーバー接続: The in-line crossovers are designed to separate audio frequencies, sending low frequencies to the woofers and high frequencies to the tweeters. Connect them according to the provided wiring diagram (if applicable, typically printed on packaging or a separate sheet).
6. テスト: Reconnect the vehicle's battery. Test the speakers at a low volume to ensure all connections are correct and sound is clear. Gradually increase volume and check for any distortion or issues.

操作手順

Once installed, your Alpine S2-S65C speakers are ready for use. Follow these general guidelines for optimal listening experience:

• 慣らし期間: Allow a break-in period of approximately 20-30 hours of normal listening. During this time, the speaker components will loosen up, leading to improved sound quality.
• 音量調整: ヘッドユニットの音量を調整するか、 amplifier to a comfortable listening level. Avoid prolonged listening at excessively high volumes to prevent hearing damage and speaker distortion.
• オーディオ設定: ヘッドユニットのまたは amplifier's equalizer and sound processing features to fine-tune the audio to your preference. These speakers are designed to reproduce a wide frequency range, so experiment with settings to achieve your desired sound.
• Amplification： While these speakers can be driven by a stock head unit, an external amplifier (80W RMS per channel recommended) will unlock their full potential, providing greater clarity, dynamics, and bass response.

メンテナンス

Proper care will ensure the longevity and performance of your Alpine S2-S65C speakers:

• クリーニング： Gently wipe the speaker cones and surrounds with a soft, dry cloth to remove dust. Avoid using harsh chemicals or abrasive cleaners.
• 保護： If exposed to potential physical damage (e.g., in a trunk or cargo area), consider installing the optional KTE-S65G speaker grilles.
• 環境要因: スピーカーを極端な温度、直射日光、過度の湿気から保護してください。
• 定期点検: Periodically check mounting screws and wiring connections to ensure they remain secure.

トラブルシューティング

If you encounter issues with your Alpine S2-S65C speakers, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, contact Alpine customer support or a qualified service center.

仕様

保証とサポート

Your Alpine S2-S65C speaker set is covered by a manufacturer's warranty. Please retain your proof of purchase for warranty claims.

• メーカー保証: 1年間のメーカー保証。
• 延長保護プラン: Additional protection plans may be available for purchase separately. Refer to your retailer for details on 2-Year or 3-Year protection plans.
• カスタマーサポート: For technical assistance, warranty service, or further inquiries, please visit the official Alpine webサイトまたは顧客サービス部門に連絡してください。

詳細については、 Amazonのアルパインストア.