Jansite AHD 1080P 170° Wide Angle Rear View 車載カメラ

導入

This manual provides comprehensive instructions for the Jansite AHD 1080P 170° Wide Angle Rear View Car Camera, Model JM-P31-E-EU2. Please read this manual thoroughly before installation and operation to ensure correct usage and optimal performance. This camera is designed to enhance your vehicle's rear visibility, offering a wide-angle view and clear imaging for safer reversing and parking.

製品の特徴

• AHD 1080P High-Resolution Imaging: Utilizes a 1-megapixel CCD sensor with 3D noise reduction for clear, sharp, and color-accurate images.
• 170°ワイド View角度： 幅広い分野を提供する view to minimize blind spots, offering a comprehensive perspective behind your vehicle.
• Adjustable Lens & 360° Rotation: The camera lens can be rotated 360° and adjusted by 45° to achieve the optimal viewing angle for any installation position.
• Triple Control Modes: Features selectable video output (AHD 1080P or CVBS), switchable front/rear view, and optional parking guidelines, controlled by cutting specific wires.
• Integrated Step-down Module: Ensures stable power delivery and prevents overheating.
• Double-Shielded Video Cable: Provides stable video signal transmission, reducing interference and delays.
• IP69K防水等級: Fully sealed design ensures reliable operation in all weather conditions, resistant to water, fog, and extreme temperatures.
• ワイドVoltage互換性： Supports 12V-24V vehicle electrical systems.
• コンパクトなデザイン: Miniaturized form factor for discreet and versatile installation.
• ナイトビジョン: Enhanced low-light performance for clear visibility in dark conditions.

パッケージ内容

受け取り次第、パッケージの内容をご確認ください。

• Jansite AHD Rear View Camera (Model JM-P31-E-EU2)
• Video Cable (RCA connector)
• 電源ケーブル
• Mounting Hardware (screws, wrench for adjustment)
• ユーザーマニュアル（このドキュメント）

安全情報

設置および操作中は、次の安全ガイドラインに従ってください。

• 感電や損傷を防ぐため、取り付け前に車両の電源が切断されていることを確認してください。
• Route cables carefully to avoid interference with vehicle moving parts, sharp edges, or heat sources.
• 運転者の邪魔をしないでください view or interfere with vehicle safety systems during installation.
• This camera is an aid for reversing and parking; always check your surroundings directly.
• Only use the camera within its specified voltage範囲（12V-24V）。

インストールガイド

Follow these steps for proper installation of your Jansite rear view カメラ：

1. 取り付け場所の選択: Choose a suitable location at the rear of your vehicle that provides an unobstructed view. The camera's mini design allows for versatile surface mounting.
   

   画像: Examples of various installation positions for the camera, including normal, horizontal, and upside-down mounting, with real-shot exampレ。

2. 安全な取り付け: Use the provided screws to firmly attach the camera to the chosen surface.
3. 角度調整: The camera lens can be rotated 360° and adjusted by 45° up or down. Use the included wrench to fix the lens at the optimal view角度。
   

   Image: The camera's adjustable lens (45° up/down, 360° rotation) and its compact dimensions compared to a 20 Euro cent coin.
4. 配線：
   • Connect the camera's power cable to your vehicle's reverse light power supply (typically 12V) or a constant 12V-24V power source if using for continuous monitoring.
   • Connect the video cable (RCA connector) from the camera to your compatible display unit (e.g., car stereo, aftermarket LCD/TFT screen).
   • 重要な互換性に関する注意: This camera is compatible ONLY with car stereos, head units, OEM navigation systems, stereo displays, DVD players, or rearview mirror monitors that accept standard RCA input. It is NOT suitable for dash cams or mirror dash cams due to different connector and PIN definitions.
     

     Image: Visual warning about compatibility, showing incompatible dash cams.

操作手順

The camera features three control modes activated by cutting specific wires on the video cable. Perform these modifications 前に final installation if needed.

1. Guideline ON/OFF:
   • デフォルト： Parking guidelines are ON.
   • To turn guidelines OFF: Cut the green wire loop.
2. Video Signal Output (AHD 1080P / CVBS):
   • デフォルト： AHD 1080P (25FPS). This is suitable for AHD-compatible displays.
   • To switch to CVBS signal: Cut the orange wire loop. CVBS is compatible with most older or non-AHD displays.
3. フロント/リア View Switching (Mirror Image / Positive Image):
   • デフォルト： Mirror Image (Rear View).
   • To switch to Positive Image (Front View): Cut the white wire loop. This is useful if installing the camera as a front camera.
   

   Image: Illustration of the three control modes activated by cutting specific wires: guideline ON/OFF, AHD 1080P to CVBS signal switching, and mirror image (rear view) to positive image (front view).

4. ディスプレイの設定： After installation, access your display unit's settings to select the correct reversing system (e.g., AHD 1080P 25fps or CVBS) if applicable.
   

   画像: Example of a car stereo interface showing settings for reversing system selection, including AHD 720p 25fps and AHD 1080p 25fps.

メンテナンス

To ensure the longevity and optimal performance of your camera, follow these maintenance tips:

• クリーニング： カメラのレンズは定期的に柔らかくてきれいな布で拭いてください。amp 視界を確保するために布で拭いてください。研磨剤入りの洗剤は使用しないでください。
• 防水設計： The camera features an IP69K waterproof rating, making it resistant to high-pressure water jets and submersion. No special waterproofing maintenance is required.
  

  Image: The camera submerged in water, emphasizing its IP69K waterproof rating and robust housing, with examples of use in rain, snow, and desert conditions.
• ケーブル検査: Periodically check cables for any signs of wear or damage, especially where they pass through vehicle bodywork.

トラブルシューティング

カメラに問題が発生した場合は、次の一般的な問題と解決策を参照してください。

• 表示される画像がありません:
  • Check all cable connections (power, video) are secure.
  • Ensure the camera is receiving power (e.g., reverse lights are on).
  • Verify your display unit is set to the correct video input.
  • Confirm the video signal type (AHD/CVBS) matches your display and the camera's wire-cut configuration.
• ぼやけた画像または歪んだ画像:
  • カメラのレンズを掃除してください。
  • Check video cable for damage or kinks.
  • Ensure the video signal type (AHD/CVBS) is correctly configured for your display.
  • Verify the display unit's resolution settings.
• 正しくない View (Mirror/Front):
  • Check the white wire loop on the camera cable. Cut it if you need front view, leave it intact for rear view.
• No Parking Guidelines:
  • Check the green wire loop on the camera cable. Cut it if you want guidelines OFF, leave it intact for guidelines ON.
• Interference/Signal Noise:
  • Ensure the double-shielded video cable is used and routed away from strong electrical interference sources.
  • Verify power connections are stable and free from fluctuations.

仕様

保証とサポート

For warranty information and technical support, please refer to the contact details provided with your purchase or visit the official Jansite webサイトでご確認ください。保証請求に備えて購入証明書を保管してください。