ワリ・ダウ・ソル

WALI Solar Fake Security Camera

Instruction Manual for Model DOW-SOL

WALI Brand Logo

1.製品オーバーview

The WALI DOW-SOL Solar Fake Security Camera is designed to provide a visual deterrent against potential intruders. This wireless dummy dome camera simulates the appearance and function of a real surveillance camera, featuring a flashing red LED light. It operates using dual power sources: an integrated solar panel for charging during daylight and two AA batteries (not included) for continuous operation, especially during nighttime or low-light conditions. Its weatherproof construction allows for both indoor and outdoor installation.

WALI Solar Fake Security Camera, front view

図1: 前面 view of the WALI Solar Fake Security Camera.

ビデオ1: 終了view of the WALI Solar Powered Fake Security Camera, demonstrating its features and installation.

2. パッケージ内容

インストールを続行する前に、すべてのコンポーネントが揃っていることを確認してください。

  • 1 x WALI Dome Simulation Camera (White)
  • 取り付けネジ3本
  • 3 xウォールアンカー
  • 1 x Warning Security Alert Sticker Decal
  • Note: 2 pcs AA batteries are required and are NOT included.
Package contents and dimensions of the WALI Solar Fake Security Camera

Figure 2: Diagram showing the included components and product dimensions.

3. セットアップとインストール

Follow these steps for proper installation of your WALI Solar Fake Security Camera.

  1. カメラを準備する: Gently rotate the camera section to access the battery compartment.
  2. バッテリーの取り付け: Insert two (2) AA batteries (not included) into the battery compartment, ensuring correct polarity. Close the compartment securely.
  3. 取り付け位置を選択してください: Choose a suitable location for installation. The camera can be mounted indoors or outdoors. For optimal solar charging, select a spot that receives direct sunlight for several hours daily.
  4. 掘削ポイントをマークする: Hold the camera's mounting base against the desired surface and mark the positions for the three screw holes using a pencil.
  5. パイロット穴をドリルで開ける: Drill pilot holes at the marked points. If mounting on a masonry or concrete surface, insert the provided wall anchors into the pilot holes.
  6. カメラを取り付ける: Align the camera's mounting base with the drilled holes. Secure the camera to the wall or ceiling using the provided screws.
  7. 角度の調整: Adjust the camera's angle to the desired position. The camera offers a ±90° tilt adjustment.
  8. 警告ステッカーを貼る: Place the warning security alert sticker decal in a visible location near the dummy camera to enhance its deterrent effect.
Step-by-step installation guide for the WALI Solar Fake Security Camera

Figure 3: Visual guide for battery insertion and mounting the camera.

WALI Solar Fake Security Camera showing adjustable tilt

Figure 4: Illustrates the adjustable tilt feature of the camera.

4. 操作

The WALI Solar Fake Security Camera is designed for simple, continuous operation.

  • 点滅するLED: Once batteries are installed, the red LED light on the front of the camera will begin to flash, simulating active surveillance.
  • 太陽光発電: The integrated solar panel charges the installed AA batteries during daylight hours, extending battery life and ensuring continuous operation.
  • バッテリーバックアップ: When solar power is insufficient (e.g., at night or on cloudy days), the camera automatically draws power from the AA batteries.
  • 耐候性設計: The camera's IP65 water-resistant rating ensures reliable performance in various weather conditions, including rain and sun exposure.
WALI Solar Fake Security Camera showing solar and battery power

Figure 5: Depicts the dual power operation (solar and battery).

WALI Solar Fake Security Camera with flashing red LED

Figure 6: Close-up of the flashing red LED light, enhancing realism.

5. メンテナンス

To ensure optimal performance and longevity of your dummy camera, follow these simple maintenance guidelines:

  • クリーンソーラーパネル: 定期的にソーラーパネルを柔らかくて乾いた布で拭いてください。amp 太陽光を遮り、充電効率を低下させる可能性のあるほこり、汚れ、ごみを布で取り除いてください。
  • バッテリーを確認してください: Although solar-powered, it is recommended to check the AA batteries every 6-12 months, especially if the flashing LED appears dim or stops working. Replace with fresh batteries if needed.
  • 取り付けの検査: Occasionally check that the camera is securely mounted and that screws are tight.
  • きれいな外観: Wipe the camera's exterior with a soft, dry cloth to keep it clean. Avoid using harsh chemicals or abrasive cleaners.

6。 トラブルシューティング

問題考えられる原因解決
LEDが点滅しない
  • 電池が切れているか、正しく取り付けられていません。
  • 太陽光充電が不十分です。
  • Ensure 2x AA batteries are inserted with correct polarity. Replace old batteries with new ones.
  • Relocate the camera to an area with more direct sunlight. Clean the solar panel.
Camera appears loose after installation
  • 取り付けネジが締まっていない。
  • Improper use of wall anchors.
  • すべての取り付けネジを締めます。
  • Ensure wall anchors are fully seated in pilot holes for masonry/concrete.
ソーラーパネルが効果的に充電されない
  • ソーラーパネルが汚れているか、遮られています。
  • 日光への露出が不十分。
  • ソーラーパネルの表面を清掃します。
  • Adjust the camera's position to maximize direct sunlight exposure.

7. 仕様

特徴詳細
ブランドワーリ
モデル名Dummy Camera (DOW-SOL)
接続技術Wireless (Simulated)
特集Built-in Flashing Red LED Light, Solar Powered
屋内/屋外での使用屋内、屋外
マウントタイプ壁掛け
フォームファクタードーム
耐水性レベル防水(IP65)
電源Solar Powered, 2x AA Batteries (not included)
商品の寸法 (長さ x 幅 x 高さ)7.36 x 5.21 x 4.9インチ
アイテム重量0.34キログラム
欧州連合811278025721

8.保証とサポート

メーカー保証: This WALI product comes with a 12-month warranty from the date of purchase, covering defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

カスタマーサポート: For any questions, assistance with installation, or troubleshooting, please contact WALI customer support. Experienced and friendly US-based customer support is available to assist 7 days a week.

For more information, visit the official WALI web連絡先の詳細については、サイトをご覧いただくか、購入書類を参照してください。

© 2026 WALI. All rights reserved. Specifications are subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.