PRORECK Club 6000 PAスピーカーシステム ユーザーマニュアル

1. 安全に関する注意事項

To ensure safe operation and prolong the lifespan of your PRORECK Club 6000 PA Speaker System, please adhere to the following safety guidelines:

• 電源: Connect the system only to a grounded AC power outlet with the correct voltage (115V/230V AC selector). Ensure the power cable is not pinched or walked on.
• 換気： Do not block any ventilation openings. Maintain adequate space around the units for proper airflow to prevent overheating.
• 水分と液体: Keep the system away from water, rain, and excessive humidity. Do not place liquid-filled objects on or near the units.
• 熱源: Avoid placing the system near heat sources such as radiators, heat registers, stoves, or other heat-producing apparatus.
• クリーニング： Unplug the system from the power outlet before cleaning. Use a dry cloth for cleaning. Do not use liquid cleaners or aerosol cleaners.
• サービス: 本製品の修理はご自身で行わないでください。修理は必ず資格のあるサービス担当者にご依頼ください。電源コードやプラグの破損、液体のこぼれや異物の混入、雨や湿気への曝露、正常に動作しない、落下など、本製品が何らかの損傷を受けた場合は、修理が必要です。
• 配置: Ensure the subwoofers and line array speakers are placed on stable, level surfaces. When using the pole mounts, ensure they are securely fastened and the speakers are balanced to prevent tipping.
• 聴覚保護: 高音圧レベルに長時間さらされると、永久的な聴覚障害を引き起こす可能性があります。システムを大音量で操作する際は、適切な聴覚保護具を使用してください。

2. パッケージ内容

The PRORECK Club 6000 PA Speaker System Combo Set includes the following components:

• アクティブサブウーファー（15インチ）×1
• パッシブサブウーファー（15インチ）×1
• ラインアレイスピーカー（4インチ）×6
• スピーカースタンドポール×2
• 6フィート電源ケーブル×1
• リモコン x 1
• Necessary connection cables (e.g., Speakon to Speakon, XLR to XLR)
• ユーザーマニュアル (本書) x 1

Image: All components of the PRORECK Club 6000 PA Speaker System, including two subwoofers, four line array speakers, two speaker poles, cables, and a remote control.

3.製品オーバーview

The PRORECK Club 6000 is a powerful stereo PA speaker system designed for various applications, from parties and DJ events to weddings and meetings. It features a robust design with wooden subwoofer enclosures for enhanced sound quality.

3.1. コントロールパネルの機能

The active subwoofer houses the main control panel, offering comprehensive connectivity and sound adjustment options. Refer to the diagram below for a detailed layout of the controls and inputs.

Image: Detailed diagram of the active subwoofer's rear control panel, showing various inputs, outputs, and control knobs.

1. MP3/BT Volume Control
2. Sub Frequency Control
3. 電源LEDインジケータ
4. 位相スイッチ
5. リミットLEDインジケーター
6. Sub Volume Control
7. マスターボリュームコントロール
8. RCA入力（ステレオ）
9. AUX（3.5mm）入力
10. XLR/6.35 Composite Input
11. Echo Level Control
12. MIC1 & MIC2 Volume Control
13. 2 MIC XLR & 1/4" Inputs
14. XLR出力
15. 主電源スイッチ
16. ヒューズ内蔵AC電源
17. 115V /230VACセレクター
18. MP3 Player (USB/SD Card)
19. Speaker Output (for Line Array Speakers)
20. Speakon Output to Passive Subwoofer

3.2. System Components and Dimensions

The system comprises two 15-inch subwoofers (one active, one passive) and four 6-inch line array speakers. The line array speakers are designed to be pole-mounted on top of the subwoofers for optimal sound dispersion.

画像: クローズアップ views highlighting key features such as the array speakers for powerful treble, rotating knob for securing the stand pole, adjustable speaker stand pole, connection details for easy assembly, subwoofer for ample bass, and convenient lifting handles on the subwoofers.

Image: Diagram illustrating the dimensions of the PRORECK Club 6000 PA Speaker System, showing the height of the assembled units (83 inches and 77 inches), subwoofer dimensions (20x22.5x23 inches), and line array speaker dimensions (14x8x7 inches).

4. セットアップ

PRORECK Club 6000 PA スピーカー システムを正しくセットアップするには、次の手順に従ってください。

4.1. 組み立て手順

1. Position Subwoofers: Place the active and passive subwoofers in your desired locations. Ensure they are on a stable, flat surface.
2. Insert Speaker Poles: Insert the provided speaker stand poles into the top mounting holes of each subwoofer. Secure them using the rotating knob on the subwoofer.
3. ラインアレイスピーカーの取り付け: Attach the line array speakers to the top of the speaker poles. Each pole supports two line array speakers. Ensure they are securely fastened.

4.2.接続ガイド

1. パッシブサブウーファーを接続します: Use the Speakon cable to connect the "Speakon Output to Passive Subwoofer" (20) on the active subwoofer's control panel to the input on the passive subwoofer.
2. Connect Line Array Speakers: Use the appropriate cables (typically Speakon) to connect the "Speaker Output" (19) on the active subwoofer to the line array speakers. Repeat for the passive subwoofer's outputs if applicable.
3. オーディオソースを接続:
   • ブルートゥース： Ensure Bluetooth is enabled on your device and the system. Select "Bluetooth" mode on the MP3 Player (18). Pair with "PRORECK CLUB 6000".
   • USB Drive/SD Card: Insert a USB drive or SD card into the respective slot on the MP3 Player (18). The system will automatically switch to USB/SD mode and begin playback.
   • RCA入力： Connect your audio source (e.g., mixer, CD player) to the "RCA Input" (8).
   • 3.5mm AUX入力: Connect devices with a 3.5mm output (e.g., smartphone, laptop) to the "AUX (3.5mm) Input" (9).
   • XLR/6.35コンポジット入力: For professional audio equipment, use the "XLR/6.35 Composite Input" (10).
   • マイク: Connect microphones to the "2 MIC XLR & 1/4" Inputs" (13).
4. 電源接続: Before plugging in, ensure the "115V/230V AC Selector" (17) is set to your local voltage. Connect the 6-feet power cable to the "AC Power with Built-in Fuse" (16) input and then to a grounded power outlet.

5. 操作手順

This section details how to operate your PRORECK Club 6000 PA Speaker System.

5.1. 電源のオン/オフ

• To power on the system, ensure all connections are secure, then flip the "Main Power Switch" (15) to the ON position. The "Power LED Indicator" (3) will illuminate.
• To power off, flip the "Main Power Switch" (15) to the OFF position.

5.2. オーディオの再生と音量調節

• MP3 Player (USB/SD/Bluetooth): Use the controls on the "MP3 Player" (18) or the remote control to select input mode (Bluetooth, USB, SD), play/pause, skip tracks, and adjust the "MP3/BT Volume Control" (1).
• マスターボリューム： Adjust the overall system volume using the "Master Volume Control" (7).
• サブウーファーの音量: Fine-tune the bass level with the "Sub Volume Control" (6).
• Sub Frequency: Adjust the crossover frequency for the subwoofer using the "Sub Frequency Control" (2) to blend the bass with the line array speakers.
• Microphone Volume and Echo: Adjust the volume for connected microphones using "MIC1 & MIC2 Volume Control" (12). Apply echo effect with the "Echo Level Control" (11).
• フェーズスイッチ: The "Phase Switch" (4) can be used to optimize bass response depending on speaker placement and room acoustics. Experiment with both positions to find the best sound.
• 制限LED： The "Limit LED Indicator" (5) illuminates when the amplifier is approaching its maximum output. If this LED is constantly lit, reduce the volume to prevent distortion and potential damage.

6. メンテナンス

Proper maintenance ensures the longevity and optimal performance of your PA system.

• クリーニング： Regularly wipe down the exterior surfaces of the subwoofers and speakers with a soft, dry, lint-free cloth. Do not use abrasive cleaners, waxes, or solvents.
• グリル： Gently vacuum speaker grilles to remove dust and debris.
• 接続: Periodically check all cable connections for tightness and signs of wear. Replace damaged cables immediately.
• ストレージ： When not in use for extended periods, store the system in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to use original packaging or protective covers to prevent dust accumulation and physical damage.
• ヒューズの交換: If the system does not power on, check the fuse located near the AC power input (16). Replace it with a fuse of the same type and rating only.

7。 トラブルシューティング

If you encounter issues with your PRORECK Club 6000 system, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact PRORECK customer support for assistance.

8. 仕様

9. 保証とサポート

PRORECK stands behind the quality of its products. For specific warranty details regarding your Club 6000 PA Speaker System, please refer to the warranty information provided at the time of purchase or contact PRORECK customer support directly.

カスタマーサポート:

• For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact PRORECK AUDIO customer service.
• You can often find contact information on the official PRORECK webサイトまたは製品を購入した小売店を通じて購入できます。
• When contacting support, please have your product model number (CLUB 6000) and purchase details readily available.

Note: Items are shipped in 3 separate packages.