LifePro VibraCare Calf & Foot Massager with Heat

1. はじめに

Thank you for choosing the LifePro VibraCare Calf & Foot Massager. This device is designed to provide targeted relief and relaxation for your feet and calves. Featuring vibration and acupressure therapy, along with an optional heat function, it aims to reduce joint stiffness, alleviate discomfort, and promote better blood circulation. This manual will guide you through the proper setup, operation, and maintenance of your massager to ensure optimal performance and a soothing experience.

2. 重要な安全情報

Please read all instructions carefully before using the LifePro VibraCare Calf & Foot Massager. Keep this manual for future reference.

• 医師に相談してください: If you have any pre-existing medical conditions, including but not limited to diabetes, neuropathy, heart conditions, or are pregnant, consult your doctor before using this device.
• 医療用ではありません: This massager is intended for personal relaxation and comfort only. It is not a medical device and should not be used to diagnose, treat, cure, or prevent any disease or health condition.
• 水を避ける: マッサージ機を水の近くや水中で使用しないでください。amp environments. Do not immerse the device in water.
• 適切な電源: Use only the provided AC adapter. Ensure the power outlet matches the voltagアダプタに指定されています。
• 監督： Close supervision is necessary when the massager is used by or near children, invalids, or disabled persons.
• 使用を中止してください: If you experience any pain, discomfort, or unusual sensations during use, stop immediately and consult a physician.
• 熱注意: The heat function can reach temperatures between 108°-113°F. Individuals with reduced heat sensitivity should use caution. Do not use heat for prolonged periods on one area.
• 清潔さ: Always ensure the device is clean and dry before and after each use.

3. パッケージ内容

Upon unpacking your LifePro VibraCare Calf & Foot Massager, please ensure all items listed below are present and in good condition:

• LifePro VibraCare Calf & Foot Massager Unit
• ワイヤレスリモコン
• AC電源アダプター
• ユーザーマニュアル
• 滑り止めマット

4.製品オーバーview

Familiarize yourself with the components of your LifePro VibraCare massager:

• 本体: The primary device housing the motor, control panel, and foot/calf pads.
• コントロールパネル： Located at the top of the unit, it features buttons for power, mode selection, intensity adjustment, and heat function.
• Foot/Calf Pads: Textured surfaces designed for optimal contact and acupressure points.
• Adjustable Tilt Bar: Allows you to change the angle of the massager for comfortable foot or calf positioning.
• ワイヤレスリモコン: Provides convenient access to all functions from a distance.

5. セットアップ

1. 配置: Place the massager on a flat, stable surface. For added stability and comfort, use the included non-slip mat underneath the unit.
2. 電源接続: Connect the AC power adapter to the power input port on the massager unit. Plug the other end into a standard electrical outlet.
3. リモートコントロール: Ensure the remote control has batteries installed. If not, open the battery compartment and insert the required batteries (usually AAA, not specified in data, so general advice).
4. 傾きを調整: The massager features an adjustable tilt bar. You can adjust the angle to suit your preferred massage position for either feet or calves.

6. 操作手順

The LifePro VibraCare offers various programs and intensity levels for a personalized massage experience.

6.1 基本操作

1. 電源オン: 電源ボタンを押します（⏻) on the control panel or remote control to turn on the device. The display will illuminate.
2. プログラムを選択してください: Use the 'P' (Program) button on the control panel or the arrow buttons on the remote to cycle through the 5 pre-programmed massage modes (P1-P5) or select a manual mode (HA).
3. 強度を調整: Use the 'Speed' or arrow buttons on the remote to adjust the vibration intensity. There are 30 intensity levels available.
4. 時間設定: The massager typically runs for 15-minute intervals. You can adjust the massage duration using the time setting on the remote control.
5. 熱を活性化する: ヒートボタン（♨) on the control panel or remote to activate the soothing heat function. Press again to turn off.
6. 電源を切る： 電源ボタンを押します（⏻) again to turn off the massager.

6.2 Massage Positions

• フットマッサージ： Sit comfortably and place your bare feet on the textured pads of the massager. Adjust the tilt bar for the most comfortable angle.
• ふくらはぎマッサージ: For calf relief, you can flip the massager upside down and rest your calves on the vibrating pads. This allows for targeted vibration and acupressure on your calf muscles.

7. メンテナンス

7.1 クリーニング

• 清掃する前に必ずマッサージ機の電源プラグをコンセントから抜いてください。
• マッサージ機の表面を柔らかく、少し硬めの布で拭いてください。amp 布で拭いてください。研磨剤入りの洗剤、溶剤、または刺激の強い化学薬品は使用しないでください。
• デバイス内部に液体が入らないようにしてください。
• Allow the massager to dry completely before storing or next use.

7.2 ストレージ

• マッサージ機は直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
• Avoid placing heavy objects on the massager during storage.
• マッサージ器はお子様の手の届かないところに保管してください。

8。 トラブルシューティング

If you encounter any issues with your LifePro VibraCare massager, please refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact LifePro customer support for assistance.

9. 仕様

• モデル名: VibraCare Calf & Foot Massager
• モデル番号: LP-VBRCP
• メーカー: ライフプロ
• 電源: コード式電気（ACアダプター）
• コードレス： いいえ
• 耐水性レベル: 耐水性はありません
• ヒートオプション: Yes (108°-113°F)
• プログラム: 5 Pre-programmed modes + Manual mode
• 強度レベル： 30
• ユニット数: 1.00 カウント

10.保証とサポート

LifePro is committed to providing high-quality products and excellent customer service. Your LifePro VibraCare Calf & Foot Massager comes with a manufacturer's warranty.

• 保証情報: For detailed information regarding your product's warranty, including coverage and duration, please refer to the warranty card included in your package or visit the official LifePro webサイト。
• カスタマーサポート: If you have any questions, require technical assistance, or need to report an issue with your massager, please contact LifePro customer support. You can typically find contact information (phone, email, or support portal) on the LifePro webサイトまたは製品パッケージに記載されています。

Please have your model number (LP-VBRCP) and purchase date ready when contacting support to expedite the process.