DEWALT ToughSeries 25ft Illuminated Tape Measure (DWHT35625S)

導入

The DEWALT ToughSeries 25ft Illuminated Tape Measure (Model DWHT35625S) is engineered for durability and enhanced visibility in demanding work environments. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your tape measure.

図1: 前面 view of the DEWALT ToughSeries 25ft Illuminated Tape Measure.

設定

初期充電

Before first use, fully charge the integrated LED battery. The tape measure includes a USB charging cable for convenience.

• Locate the USB charging port on the side of the tape measure.
• Connect the provided USB cable to the tape measure and a compatible USB power source (e.g., wall adapter, computer USB port).
• 充電中は充電インジケータライトが点灯します。
• Allow approximately 3 hours for a full charge. A full charge provides up to 3 hours of continuous LED runtime.

Figure 2: The DEWALT ToughSeries tape measure showing the included USB charging cable.

Figure 3: The tape measure connected to a power source for charging.

操作手順

刃の伸縮

• To extend the blade, pull the end hook away from the case.
• To retract the blade, release the end hook and allow the blade to smoothly return into the case. Guide the blade to prevent rapid retraction.

Using the Slide Lock

• To lock the blade at a desired measurement, push the slide lock button forward.
• ロックを解除するには、スライドロックボタンを後方に引きます。

Activating the LED Light

The integrated LED light illuminates the measurement area for improved visibility in low-light conditions.

• Press the LED power button (typically located near the blade opening) to turn the light on.
• ボタンをもう一度押すと消灯します。
• The LED features an automatic shut-off function after 60 seconds of inactivity to conserve battery life.

Figure 4: The LED light illuminates the measurement area for clear readings.

測定値の読み取り

The tape measure features a double-sided blade print, allowing for easy reading from various angles, including overhead measurements.

Figure 5: The double-sided blade print facilitates overhead measurements.

メンテナンス

クリーニング

• Regularly wipe the blade and case with a clean, damp 布でホコリやゴミを取り除きます。
• Avoid using harsh chemicals or abrasive cleaners, as these can damage the blade markings or case finish.
• Ensure the blade is dry before fully retracting it into the case to prevent rust.

バッテリーケア

• Recharge the battery when the LED light dims or fails to illuminate.
• 長期保管する場合は、バッテリーを約 50% まで充電し、涼しく乾燥した場所に保管してください。

ストレージ

• Store the tape measure in a dry environment, away from extreme temperatures.
• The ToughSeries design provides a 100ft drop rating, but proper storage helps prolong the tool's lifespan.

トラブルシューティング

LED ライトが動作しない

• バッテリー残量を確認します: The battery may be depleted. Connect the tape measure to a USB power source and allow it to charge for at least 30 minutes before attempting to use the LED again.
• Ensure Proper Activation: Press the LED power button firmly.

刃がスムーズに引っ込まない

• 刃を掃除する: Dust, dirt, or debris on the blade can hinder retraction. Extend the blade fully and carefully wipe it clean with a damp 布。
• 障害物の確認: Inspect the blade opening for any foreign objects that might be blocking the blade's path.

Slide Lock Not Engaging/Disengaging

• 残骸を片付ける: Ensure no debris is lodged around the slide lock mechanism.
• 正常な運行： Confirm you are pushing the slide lock fully forward to engage and fully backward to disengage.

仕様

保証情報

DEWALT products are typically covered by a limited warranty. For specific warranty terms and conditions applicable to your region and product, please refer to the official DEWALT web公式サイトをご覧いただくか、カスタマーサポートまでお問い合わせください。保証請求のために購入証明書を保管してください。

カスタマーサポート

For technical assistance, replacement parts, or further inquiries regarding your DEWALT ToughSeries 25ft Illuminated Tape Measure (Model DWHT35625S), please visit the official DEWALT website or contact their customer service department. When contacting support, please have your model number (DWHT35625S) and purchase details readily available.