1. はじめに
The VanSmaGo Laser Christmas Projector Lights (Model SGH-53) are designed to project vibrant red, green, and blue (RGB) laser patterns, creating a dynamic 'firefly' effect. This projector is suitable for both indoor and outdoor decorative lighting, ideal for holidays, parties, or general home ambiance. This manual provides essential information for safe installation, operation, and maintenance of your projector.
2. 安全情報
- レーザー放射： Avoid direct eye exposure to the laser beam. Do not stare into the aperture. This product uses Class II lasers.
- 子供たち： Keep the device out of reach of children. Adult supervision is required when the device is in use.
- 電源: 付属の電源アダプターのみを使用してください。電源が電圧と一致していることを確認してください。tag指定された要件。
- インストール: Securely install the projector to prevent it from falling. Do not mount near flammable materials.
- 水への露出: While the projector is IP65 waterproof, ensure the power adapter and connections are protected from direct water exposure, especially during heavy rain or snow.
- 温度： Operate the device within the specified temperature range. Extreme temperatures can affect performance and lifespan.
3. パッケージ内容
パッケージに以下の項目が含まれているか確認してください。
- Laser Projector Unit (Model SGH-53)
- RFリモートコントロール
- グラウンドステーク
- Round Base (for indoor or flat surface use)
- Power Adapter with 16.4ft Power Cord
- ユーザーマニュアル
4.製品オーバーview
The VanSmaGo Laser Projector features a durable, weather-resistant housing and projects a moving 'firefly' effect in red, green, and blue colors. It includes a remote control for easy adjustment of settings.
Image 1: VanSmaGo Laser Projector and Remote Control.
主な特徴:
- RGB Moving Firefly Effect: Projects red, green, and blue laser dots that move to create a dynamic 'firefly' display.
- 7 色の組み合わせ: Red, Green, Blue, Red+Green, Red+Blue, Green+Blue, Red+Green+Blue.
- IP65防水: Designed for outdoor use, resistant to snow, rain, dust, and sunlight.
- 広範囲をカバー: Can cover up to 3200 sq.ft from a distance of 32.8 ft.
- RFリモートコントロール： Adjust colors, speed, flash mode, and set timers wirelessly.
- 簡単なインストール: Includes a ground stake for outdoor placement and a round base for indoor or flat surface use.
Image 2: Available Color Combinations.
Image 3: Projector's Weather Resistance (IP44/IP65).
Image 4: Projection Coverage Area.
5. インストール
5.1 Outdoor Installation (Ground Stake)
- プロジェクターユニットの底部に接地杭を取り付けます。
- Insert the ground stake firmly into soft ground in your desired projection area.
- Adjust the angle of the projector to direct the lights as desired. The projector head can be rotated up to 180 degrees.
5.2 Indoor/Flat Surface Installation (Round Base)
- プロジェクターユニットの下部に丸いベースを取り付けます。
- Place the projector on a stable, flat surface indoors or outdoors.
- Adjust the projection angle.
5.3電源接続
- 電源アダプタをプロジェクターの電源入力に接続します。
- Plug the power adapter into a standard electrical outlet. Ensure the outlet is protected from weather if used outdoors.
Image 5: Outdoor Installation Exampル。
Image 6: Projector Head Adjustment.
6. 操作
The projector is controlled using the included RF remote control. Ensure the remote has working batteries.
6.1 電源オン/オフ
- を押す オン/オフ button on the remote to turn the projector on or off.
- The projector will default to a 6-hour timer cycle upon power-on (6 hours on, 18 hours off).
6.2リモコン機能
- R / G / B: Press these buttons to select individual Red, Green, or Blue laser colors.
- 色: Press to cycle through combined color modes (Red+Green, Red+Blue, Green+Blue, Red+Green+Blue).
- 閃光： Activates a flashing effect for the projected lights.
- 速度+/-： Adjusts the speed of the moving 'firefly' effect.
- TIMER (1H, 2H, 3H, 4H, 5H, 6H): Sets the projector to operate for the selected duration (e.g., 1 hour, 2 hours) and then turn off. The projector will automatically turn on again after 18 hours of being off, maintaining a 24-hour cycle. To use the timer, the projector must remain connected to power.
Note: If power is disconnected, the projector will reset to its default 6-hour timer cycle when reconnected.
画像 7: リモート コントロールのレイアウト。
7. メンテナンス
7.1 クリーニング
- 清掃する前にプロジェクターの電源プラグが抜かれていることを確認してください。
- 外側は柔らかくて乾いた布で拭いてください。amp 布で拭いてください。強力な化学薬品や研磨剤入りの洗剤は使用しないでください。
- Gently clean the laser aperture with a soft, dry cloth to ensure clear projection.
7.2 ストレージ
- プロジェクターを使用しないときは、涼しく乾燥した場所に保管してください。
- Keep it in its original packaging or a protective container to prevent damage.
8。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| プロジェクターがオンになりません。 | No power, faulty adapter, remote battery dead. | Check power connection. Ensure adapter is working. Replace remote batteries. |
| リモコンが応答しません。 | リモコンの電池切れ、障害物、範囲外。 | Replace remote batteries. Ensure clear line of sight to projector. Move closer to the projector. |
| 投影が暗かったり不鮮明です。 | Dirty laser aperture, too much ambient light, projector too far. | Clean the laser aperture. Reduce ambient light. Move projector closer to the projection surface. |
| Settings reset after power cycle. | これは正常な動作です。 | The projector defaults to a 6-hour timer cycle upon power-on. Re-apply desired settings with the remote. To maintain settings, keep the projector powered and use the remote for on/off. |
9. 仕様
| モデル番号 | GHS-53 |
| ブランド | ヴァンスマゴ |
| 光源の種類 | Laser (Red, Green, Blue) |
| 材料 | アクリロニトリルブタジエンスチレン（ABS） |
| 色 | 黒 |
| 電源 | コード式電気 |
| 巻tage | 5ボルト |
| 防水等級 | IP65 |
| 製品寸法 | 長さ2インチ x 幅2インチ x 高さ5インチ |
| アイテム重量 | 10.7オンス |
| 取り付けタイプ | Ground Stake, Wall Mount |
| 欧州連合 | 860012352821、713317595441 |
10. 保証とサポート
VanSmaGo provides a 12ヶ月保証 for quality-related issues from the date of purchase. If you encounter any problems with your product, please contact our customer support for assistance.
For support, please refer to the contact information provided with your purchase or visit the official VanSmaGo webサイト。