SCULPFUN S30 Ultra 33000mW Laser Engraving Machine

1. はじめに

This manual provides essential information for the safe and effective operation of your SCULPFUN S30 Ultra 33000mW Laser Engraving Machine. This high-power laser engraver is designed for precision engraving and cutting of various materials, including wood, metal, and acrylic. Please read this manual thoroughly before initial use to ensure proper setup, operation, and maintenance.

Figure 1.1: SCULPFUN S30 Ultra 33000mW Laser Engraving Machine with examp彫刻。

2. 安全上の注意

WARNING: Laser radiation can cause eye and skin damage. Always follow safety guidelines.

• Due to the powerful laser, never operate the engraving machine unsupervised. Pause operation if you must leave the area.
• Always install the laser protective cover before operating the machine. If the cover is not installed, wear appropriate laser safety goggles.
• Do not touch the laser beam with your hands or any body part, as this can cause severe burns.
• Avoid strong impacts to the machine, which could damage components or misalign the laser.
• Children under the age of 14 are prohibited from using this product. Children over 14 require adult supervision during operation.
• Do not direct the laser beam at any specular (mirror-like) reflective objects, as this can cause injury to the operator or damage the laser.
• Ensure adequate ventilation in the work area to dissipate fumes and particles generated during engraving and cutting.

Figure 2.1: Safety features including Emergency Stop Switch and Key Lock for enhanced user protection.

3 製品の特徴

• Powerful 33W Laser Output: Utilizes upgraded 6*6W diodes for superior cutting and engraving capabilities, capable of cutting 20mm lightweight wood, 15mm paulownia wood, or 0.05mm stainless steel in a single pass.
• 広い彫刻エリア: Features a generous 600x600mm engraving area, accommodating large-scale projects.
• 32-bit Air-Assisted Motherboard: Equipped with an advanced motherboard supporting Bluetooth wireless connection and intelligent control of the air assist function via LightBurn's M8 button.
• Industrial-Grade Cutting Accuracy: Achieves 0.005mm high-precision engraving with an upgraded V2.0 X-axis linear slide rail, minimizing moiré patterns.
• Replaceable Protective Lens: Innovative design allows for easy replacement of the laser lens, significantly extending the laser's lifespan. A free lens is included.
• Enhanced 42-bit Stepping Motor: Provides robust power for high-speed movement, with a torque of 4.2 Kg·cm, ensuring stability even with heavier loads.
• Built-in High-Pressure Air-Assisted Nozzle: Generates powerful airflow to improve cutting efficiency by over 5 times and ensures clean cutting surfaces.
• Solid and Durable Frame: Constructed from high-strength aluminum alloy, capable of withstanding up to 50KG, ensuring long-term precision and durability.

Figure 3.1: Demonstrating the 33W laser power, cutting capabilities, and metal colorization feature.

Figure 3.2: Automatic Controlled Air Assist (M8) in action, improving cutting quality.

4. セットアップ

Unpack all components carefully and verify against the packing list. Assemble the machine according to the detailed instructions provided in the separate assembly guide (not included in this manual). Ensure all connections are secure and the machine is placed on a stable, level surface in a well-ventilated area.

1. フレーム組み立て： Connect the aluminum alloy frame components securely.
2. レーザーモジュールの取り付け: Mount the laser module onto the X-axis carriage.
3. エアアシスト接続: Connect the air hose from the air pump to the laser module's nozzle.
4. 電気接続: Connect the power adapter to the machine and a suitable power outlet (100-240V AC, 50/60Hz).
5. ソフトウェアのインストール: Install the recommended operating software (LightBurn or LaserGRBL) on your computer.
6. 初期フォーカス調整: Use the fixed-focus column to set the correct laser focus for your material.

Figure 4.1: The S30 Ultra series maintains a consistent structure for easy upgrades, requiring only laser head replacement for power upgrades.

5. 操作手順

The SCULPFUN S30 Ultra supports various operating software, including LightBurn (with M8 air assist function) and LaserGRBL. It is compatible with both Windows and MAC systems. Supported file formats include NC, BMP, JPG, PNG, DXF, and other picture formats. Data transmission can be done via USB connection or Bluetooth wireless connection.

1. ソフトウェアの起動: Open your preferred laser control software (e.g., LightBurn).
2. Connect Machine: Establish a connection between your computer and the engraver via USB or Bluetooth.
3. 荷重設計: Import your desired design file (e.g., NC, JPG, PNG).
4. マテリアルの配置: Place the material to be engraved or cut on the working area. Ensure it is flat and secured.
5. パラメータ設定： Adjust laser power, speed, and passes according to the material type and desired outcome. Refer to the software's documentation for detailed parameter settings.
6. Air Assist Control: If using LightBurn, utilize the M8 button to intelligently control the air assist for optimal cutting and to prevent material yellowing/blackening.
7. 運用開始： ソフトウェアから彫刻または切断プロセスを開始します。動作中は機械を注意深く監視してください。
8. 緊急停止： In case of any emergency, immediately press the red emergency stop switch on the machine.

Figure 5.1: The SCULPFUN S30 Ultra supports popular software like LightBurn and LaserGRBL for versatile operation.

6. メンテナンス

定期的なメンテナンスにより、レーザー彫刻機の寿命が長くなり、最適なパフォーマンスが確保されます。

• Laser Lens Replacement: The S30 Ultra features a replaceable lens. If the lens becomes damaged or its performance degrades after long-term use, replace it with a new one to restore cutting power. One free lens is included with your purchase, and additional lenses can be obtained from SCULPFUN.
• ノズルのクリーニング: Regularly clean the high-pressure air-assisted nozzle to prevent blockages and maintain efficient airflow. A nozzle cleaning tool is provided.
• レール洗浄: Keep the linear slide rails clean and free of dust and debris to ensure smooth and precise movement of the laser module.
• 一般的な清掃: Periodically clean the entire machine, especially the working area, to remove any residue from engraving and cutting.

Figure 6.1: Essential maintenance tools for your SCULPFUN S30 Ultra.

7。 トラブルシューティング

This section provides general guidance for common issues. For detailed troubleshooting, refer to the comprehensive instruction manual or contact SCULPFUN support.

8. 仕様

• 製品モデル: SCULPFUN S30 Ultra-33W
• レーザー出力: 33W (light energy)
• レーザーフォーカス: 0.08x0.08mm
• レーザー波長: 455±5nm
• フォーカス方法: Fixed focus column + sliding device
• 彫刻精度: 0.005mm
• Engraving Area Size: 600x600mm
• Machine Electric Power: 約156W
• Air Pump Type: Main board controlled, 24V, 30L/min flow rate
• Air Hose Inner Diameter: 7.5mm
• マザーボード: 32-bit air-assisted, supports Bluetooth wireless connection
• オペレーティングソフトウェア: LightBurn (with M8 air assist), LaserGRBL, Benbox, GrblController, LiteFire
• サポート File フォーマット: NC, BMP, JPG, PNG, DXF, and other picture formats
• データ転送: USB connection or Bluetooth wireless connection
• 電源入力: 100-240V AC、50/60Hz
• 出力: 24V 7A
• 製品寸法: 34.06 x 9.72 x 9.25インチ
• パッケージ重量: 9.9kg
• 認定: CE, FCC, RoHS, FDA, ICE

Figure 8.1: High-precision linear slide rail for superior engraving detail.

Figure 8.2: Expanded working area of the S30 Ultra compared to standard models.

9. 保証とサポート

For warranty information, please refer to the documentation included with your product or contact SCULPFUN customer service directly. SCULPFUN provides support for product inquiries, technical assistance, and replacement parts such as laser lenses.

For further assistance, please visit the official SCULPFUN webサイトをご覧いただくか、カスタマー サポート チャネルにお問い合わせください。

10. 公式製品ビデオ

No official product videos from the seller were found that met the criteria for inclusion in this manual.