Fydun VGA2HDMI Adapter User Manual

1. はじめに

The Fydun VGA2HDMI Adapter converts analog VGA video and 3.5mm analog audio signals from your computer or other VGA-enabled devices into a digital HDMI signal. This allows you to display content from older VGA sources on modern HDMI displays such as HDTVs and projectors, integrating both video and audio into a single HDMI output.

2 製品の特徴

• Converts VGA video and 3.5mm analog audio to HDMI.
• Supports 1080P or 720P output, selectable.
• Plug and play operation; no software drivers required.
• Powered directly via USB cable (included).
• Supports VGA input resolutions (at 60Hz): 640x480, 800x600, 1024x768, 1280x720, 1600x1200, 1920x1080 pixels.

3. パッケージ内容

• 1 x Fydun VGA2HDMI Adapter
• 1 x USB電源ケーブル

4.製品オーバーview

Familiarize yourself with the adapter's ports and layout.

トップ view of the adapter highlights its various connection points: a VGA input port for source devices, a 3.5mm audio input jack for analog audio, a USB/POWER port for power supply, and an HDMI output port for display devices.

5. セットアップ手順

VGA ソース デバイスを HDMI ディスプレイに接続するには、次の手順に従います。

This diagram illustrates the typical connection setup for the VGA2HDMI adapter. VGA source devices such as computers, TV boxes, DVD players, and game consoles connect to the adapter's VGA input. The adapter then outputs an HDMI signal to display devices like HDTVs or projectors.

1. Connect VGA Input: Connect a VGA cable from your source device (e.g., PC, laptop, DVD player) to the VGA入力ポート on the Fydun VGA2HDMI adapter.
2. オーディオ入力を接続します: Connect a 3.5mm audio cable from your source device's audio output to the AUDIO input jack アダプター上。
3. HDMI出力を接続: HDMIケーブルを HDMI出力ポート on the adapter to the HDMI input port on your display device (e.g., HDTV, projector).
4. USB電源を接続: 付属のUSB電源ケーブルを USB/POWER port on the adapter and to a functional USB power source (e.g., computer USB port, USB wall adapter). The adapter requires external power to function.
5. デバイスの電源をオンにします: Power on your VGA source device and your HDMI display device.
6. 入力を選択します: Select the appropriate HDMI input on your display device to view the content from your VGA source.

6. 操作手順

Once all connections are made and devices are powered on, the Fydun VGA2HDMI adapter will automatically convert the VGA signal to HDMI. The adapter supports 1080P or 720P output. The output resolution is typically determined by the source device's output settings or auto-negotiated with the display. Ensure your source device is configured to output a resolution supported by the adapter and your display.

7. メンテナンス

• アダプタは乾燥した環境に保管し、直射日光や極端な温度を避けてください。
• 柔らかく乾いた布でデバイスを拭いてください。液体クリーナーや研磨剤は使用しないでください。
• Ensure all cables are connected securely but avoid excessive force when plugging or unplugging.
• アダプタを落としたり、強い衝撃を与えたりしないでください。

8。 トラブルシューティング

問題が発生した場合は、次の一般的なトラブルシューティング手順を参照してください。

ディスプレイに信号なし:

• Ensure all cables (VGA, Audio, HDMI, USB Power) are securely connected.
• Verify the USB power cable is connected to a functional power source. The adapter requires external power.
• ディスプレイ デバイスで正しい HDMI 入力が選択されていることを確認します。
• Test with different VGA or HDMI cables if possible.
• Ensure your source device is outputting a supported VGA resolution (refer to Specifications section).

音声なし:

• Confirm the 3.5mm audio cable is correctly connected from your source device to the adapter.
• Check audio settings on your source device to ensure audio is being output via the 3.5mm jack.
• Adjust volume levels on both your source device and display device.

画質が悪い:

• Ensure your VGA source device is set to a compatible resolution.
• 他の電子機器からの干渉がないか確認してください。
• Use high-quality VGA and HDMI cables.

9. 仕様

10. 保証情報

This Fydun product is covered by a standard manufacturer's warranty. Please refer to your purchase documentation or contact your retailer for specific warranty terms and duration.

11. カスタマーサポート

For technical assistance, troubleshooting, or further inquiries regarding your Fydun VGA2HDMI Adapter, please contact Fydun customer support through your retailer or visit the official Fydun web連絡先情報のサイト。