Splenssy 433MHz WiFi GSM Wireless Home Security Alarm System

1. はじめに

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Splenssy 433MHz WiFi GSM Wireless Home Security Alarm System. Please read this manual thoroughly before installation and use to ensure proper functionality and safety. Keep this manual for future reference.

2. パッケージ内容

以下にリストされているすべてのアイテムがパッケージに含まれていることを確認してください。

• 1 x Wireless Alarm Panel
• ワイヤレスPIRモーションセンサー×1
• ワイヤレスドア/窓センサー x 3
• リモコン x 2
• 2×RFIDカード
• 有線サイレン x 1
• 1 x PIR Sensor Holder
• 取り付けネジ1セット
• USB充電ケーブル x 1
• DC 1V/5A 電源アダプター x 1
• Batteries for sensors and remote controls (pre-installed or included separately)
• ユーザーマニュアル（英語）1冊

3. 仕様

4. 安全情報

• 電源アダプタが適切な電源コンセントに接続されていることを確認してください。
• Do not expose the alarm panel to water or extreme temperatures.
• デバイスを強力な電磁干渉から遠ざけてください。
• Replace batteries in sensors and remote controls as needed to maintain optimal performance.
• 自分でデバイスを分解したり修理したりしないでください。 サポートが必要な場合は、カスタマー サポートにお問い合わせください。

5. セットアップ

5.1 Alarm Panel Installation

The alarm panel can be installed in two ways: wall-mounted or desktop placement.

Image: The alarm panel can be placed on a desktop using its integrated stand or mounted on a wall. The image shows both side and rear views of the panel's versatile placement options.

• デスクトップのインストール: Simply unfold the stand at the back of the panel and place it on a flat, stable surface.
• 壁への取り付け: Use the provided mounting screws and the PIR sensor holder (which can also be used for the panel) to secure the panel to a wall at a suitable height. Ensure the location allows for good Wi-Fi and GSM signal reception.

5.2センサーの設置

PIRモーションセンサー： Install the PIR sensor in a corner or on a wall where it can cover the desired area without obstructions. Avoid placing it directly facing heat sources or windows where direct sunlight or drafts might cause false alarms. Insert 3 x 1.5V AAA batteries.

ドア/窓センサー: Install the two parts of the door/window sensor on the frame and the movable part of a door or window. Ensure the two parts are aligned and within 1cm of each other when the door/window is closed. Insert 1 x CR2450 3V battery.

5.3 Wired Siren Connection

Connect the wired siren to the designated siren port on the alarm panel. Ensure the connection is secure.

5.4 電源投入と初期設定

1. Connect the alarm panel to power using the USB charging cable and DC 5V/1A power adapter.
2. The panel will power on automatically. Follow the on-screen prompts for initial setup.
3. Insert a valid GSM SIM card (if using GSM features) into the designated slot on the panel.
4. Wi-Fi接続: Access the system settings on the LCD screen to connect the panel to your 2.4GHz Wi-Fi network. This enables app control and smart home integration.

5.5 App Connection and Smart Home Integration

Download the dedicated mobile application (available for Android and iOS) from your device's app store. Follow the in-app instructions to add your alarm system. This allows for remote control, parameter configuration, and accessory management.

Image: The alarm system can link to various smart home products, including smart speakers, cameras, and smart bulbs, all controllable via a smartphone application.

Image: The alarm panel supports eight defense areas and can link to a number of other wireless devices, offering various functions like intelligent prevention, ordinary zone, doorbell mode, and SOS.

6. 操作手順

6.1 武装解除

システムは複数の方法で起動または解除できます。

• リモートコントロール: Press the arm/disarm buttons on the provided remote controls.
• RFIDカード： Tap an authorized RFID card on the panel's RFID reader.
• モバイルアプリ: Use the dedicated smartphone application for remote arming/disarming.
• タイマー機能: Set scheduled arming and disarming times through the panel settings or mobile app.

Image: The alarm panel features a timer function for automatic arming and disarming, allowing users to set specific schedules, such as arming at 21:15 and disarming at 06:00.

6.2 双方向音声インターコム

The alarm panel supports two-way voice communication. When an alarm is triggered or a call is initiated, you can communicate through the panel using your smartphone app.

Image: The system offers a two-way voice intercom feature, enabling communication between the alarm panel and a smartphone, useful for family members to stay connected.

6.3 Voice Control (Alexa Support)

The system supports voice control integration with compatible smart assistants like Amazon Alexa. Once configured through the mobile app, you can use voice commands to arm or disarm your system.

Image: The anti-theft alarm host supports Alexa voice control, allowing users to arm or disarm the system using voice commands through a smart speaker.

6.4言語設定

The alarm panel supports multiple languages. You can switch the display language through the system settings menu on the LCD screen. No restart is required after changing the language.

Image: The alarm panel supports 9 languages, including Chinese, English, German, Russian, Spanish, Polish, Greek, French, and Portuguese, allowing users to switch freely without restarting the device.

6.5 Adding/Managing Accessories

New wireless sensors, remote controls, or RFID cards can be added to the system via the mobile app or the alarm panel's settings menu. Refer to the on-screen instructions for pairing new devices.

6.6 Alarm Functions and Zones

The system features various defense areas and alarm types:

• Intelligent Prevention Area: For critical areas requiring immediate alerts.
• Ordinary Zone: Standard detection zone.
• ドアベルモード： Configures a sensor to act as a doorbell.
• Welcome Mode Prevention Area: For entry points with a welcome chime.
• Emergency Prevention Area: For specific emergency sensors.
• Left-behind Prevention Area: For monitoring items left behind.
• SOS Distress Function: 緊急アラームを発動します。

Configure these zones and their behaviors through the system settings.

7. メンテナンス

7.1 電池の交換

Regularly check the battery status of your wireless sensors and remote controls. Replace batteries promptly when low battery indicators appear on the alarm panel or app.

• PIRセンサー： Replace with 3 x 1.5V AAA batteries.
• ドアセンサー： Replace with 1 x CR2450 3V battery.
• リモートコントロール: Replace with 2 x CR2025 3V batteries.

The alarm panel has a built-in Li-ion battery for backup power during outages. This battery is designed for long endurance.

Image: The alarm panel features a low power consumption main board and a super long endurance built-in lithium battery, allowing it to dial phone calls and send SMS even during power outages。

7.2 クリーニング

Wipe the alarm panel and sensors with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device surfaces.

8。 トラブルシューティング

• システムが電源オンにならない: Ensure the power adapter is correctly connected and the power outlet is functional. Check the USB cable for damage.
• センサーが応答しません: Check the batteries in the sensors and replace if necessary. Ensure sensors are within the wireless range of the alarm panel. Re-pair the sensor if needed.
• Wi-Fi接続なし: Verify your Wi-Fi network is 2.4GHz. Ensure the Wi-Fi password is entered correctly. Check your router for issues.
• No GSM signal: Ensure the SIM card is correctly inserted and has an active plan. Check for network coverage in your area.
• 誤報: Review sensor placement to avoid environmental triggers (e.g., direct sunlight, drafts, pets). Adjust sensor sensitivity if applicable.
• アプリの接続の問題: Ensure your smartphone has an active internet connection. Restart the app and the alarm panel.

9. 保証とサポート

This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or contact your retailer for specific warranty terms and conditions.

For technical support, troubleshooting assistance, or inquiries regarding your Splenssy Home Security Alarm System, please contact the retailer or manufacturer's customer service. Contact details are typically provided on the product packaging or the manufacturer's official webサイト。