1.製品オーバーview
The Baseus ioTa 420W Portable Power Station is a versatile and powerful energy solution designed for various applications, including outdoor camping, RVs, CPAP devices, and home emergencies. It features a 288Wh LiFePO4 battery with a 90000mAh capacity and delivers a maximum AC output of 420W. This unit supports 140W PD3.1 fast charging and offers multiple output ports for diverse device compatibility.
主な特徴:
- 90000mAh capacity, 420W maximum AC output.
- 140W PD3.1 ultra-fast charging for rapid device and power station recharging.
- 8 output ports including 2 AC outlets, 2 DC outlets, 2 USB-C ports, and 2 USB-A ports.
- Lightweight and portable design with a retractable carrying handle.
- Equipped with a premium 288Wh LiFePO4 battery pack for safety and longevity.
- 照明と緊急信号用の統合 LED ライト。
- App monitoring for real-time status updates and remote control.
箱の中身:
- Baseus ioTa 420W Portable Power Station
- 240W PD USB-C to C fast charging cable
- 5521 solar connect cable
- キャリーバッグ
- ユーザーマニュアル
Image: The Baseus ioTa 420W Portable Power Station, showcasinコンパクトなデザインとさまざまなポートを備えています。
ビデオ: 当局者がview of the Baseus ioTa Series 420W Portable Power Station, highlighting its design and key features.
2. セットアップと初期使用
2.1 電源のオン/オフ
To power on the device, press and hold the main power button located on the front panel for approximately 2 seconds until the display illuminates. To power off, press and hold the same button for 2 seconds until the display turns off. This two-second press mechanism prevents accidental power cycles.
2.2 Activating AC Outlets
The AC outlets on the side of the unit are not active by default. To enable them, press and hold the dedicated AC power button (located near the AC outlets) for 2 seconds. The indicator light next to the button will illuminate when the AC outlets are active. To deactivate, press and hold the button again.
2.3 LEDライトの使用
The integrated LED light can be activated by pressing and holding its dedicated button for 2 seconds. Subsequent short presses will cycle through different modes: solid light, SOS, and flashing. Press and hold the button again to turn off the light.
Image: The Baseus ioTa 420W Portable Power Station with its bright LED light illuminated, suitable for campingまたは緊急時の使用。
3. 発電所の運転
3.1 デバイスの充電
The power station offers multiple ways to charge your electronic devices:
- ACコンセント: Use the two 110V AC outlets for devices requiring standard wall power, up to a combined 420W continuous output (840W peak).
- USB-Cポート： Two USB-C ports are available. One supports 140W PD3.1 bidirectional charging (input/output), ideal for laptops like MacBook Pro. The other USB-C port provides up to 30W output.
- USB-Aポート： Two USB-A ports are available, supporting Quick Charge 3.0 for fast charging compatible devices.
- DCコンセント: Two 12V DC outlets are provided for powering compatible DC devices, such as portable fridges or CPAP machines.
The built-in display provides real-time information on battery level, power input/output, temperature, and remaining run/charge time. The Baseus Power Split technology intelligently adjusts power distribution across multiple outputs.
Image: The Baseus ioTa 420W Portable Power Station simultaneously powering a coffee maker, laptop, mini fridge, drone, and CPAP machine.
ビデオ: 詳細なview demonstrating the various ports and their functionalities, including charging multiple devices simultaneously.
3.2 アプリコントロール
The Baseus app allows you to monitor the power station's status remotely, including battery level, power consumption, temperature, and remaining time. You can also control certain functions like the LED light modes and brightness directly from your smartphone via Bluetooth connectivity.
Image: A smartphone displaying the Baseus app interface, showing real-time battery level, power, temperature, and remaining time for the ioTa 420W Power Station.
Video: A demonstration of the Baseus app controlling the power station while powering a standing desk, showcasing remote monitoring and control.
4. パワーステーションの充電
The Baseus ioTa 420W can be recharged using multiple methods:
- USB-C PD3.1 Fast Charging: The primary USB-C port supports 140W input, allowing the power station to be fully recharged in approximately 2.6 hours from 0%.
- ソーラー充電： Connect a compatible 100W solar panel (not included) via the provided 5521 solar connect cable to the DC input port. Charging time is approximately 3.5 hours, depending on lighting conditions.
- 車両の充電: Recharge the power station using a 13.5V 8A auxiliary power input (car charger not included). This method can fully recharge the unit in approximately 2.6 to 3.0 hours, depending on the wattage of the car charger.
Image: The Baseus ioTa 420W Portable Power Station being fast-charged via its 140W USB-C PD3.1 port, reaching 50% in under 30 minutes.
Image: The Baseus ioTa 420W Portable Power Station connected to a solar panel for recharging, illustrating its solar generator capability.
Image: The Baseus ioTa 420W Portable Power Station being recharged in a vehicle via its car charger input, offering convenient charging on the go.
Video: A full review of the Baseus 420W Power Station, including demonstrations of its various charging methods and speeds.
5. メンテナンス
To ensure optimal performance and longevity of your Baseus ioTa 420W Portable Power Station, follow these maintenance guidelines:
- 直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
- Avoid covering the ventilation fans to prevent overheating.
- Recharge the unit at least once every 3-6 months to maintain battery health, even if not in use.
- 外側は柔らかく乾いた布で拭いてください。刺激の強い化学薬品や研磨剤の使用は避けてください。
6。 トラブルシューティング
The power station is equipped with multiple protection mechanisms. If an issue occurs, the display may show an error icon or the unit may shut down automatically. Refer to the detailed user manual for specific error codes and recovery methods.
よくある問題:
- 過負荷保護: If the power consumption of connected devices exceeds 420W (continuous) or 840W (peak), the unit will automatically shut down to prevent damage. Disconnect high-power devices and restart the unit.
- 過熱： If the internal temperature exceeds safe limits, the unit may reduce output or shut down. Ensure ventilation fans are not blocked.
- 充電の問題: If the unit is not charging as expected, verify that the charging cable and adapter are functioning correctly and meet the required wattage (e.g., 140W for USB-C PD3.1).
Video: A user demonstrating the Baseus 420W Power Station in a mobile cart, including an overload test with a hair dryer, showing the unit's safety shutdown feature.
7. 仕様
| 特徴 | 仕様 |
|---|---|
| モデル番号 | 型番 |
| バッテリー容量 | 288Wh / 90000mAh LiFePO4 |
| AC出力 | 420W (Continuous) / 840W (Peak) |
| USB-C1 入出力 | 最大140W（PD3.1） |
| USB-C2出力 | 最大30W |
| USB-A1/USB-A2出力 | 12V/2.5A (QC3.0 Compatible) |
| DC入力（太陽光/車） | 100W Max (Solar), 13.5V 8A (Car) |
| DC出力 | 12V最大 |
| 製品寸法 | 10.24 x 6.69 x 4.64インチ |
| アイテム重量 | 8ポンド |
| 特集 | LED Light, App Control, Portable Suitcase-Style Design |
8. 安全情報
The Baseus ioTa 420W Portable Power Station is designed with multiple safety features to protect both the device and connected electronics. These include over-charge, over-voltage, over-heating, over-current, over-discharge, and short-circuit protection. The LiFePO4 battery pack is known for its stability and long cycle life.
Image: An illustration detailing the 8 layers of safety protection built into the Baseus ioTa 420W Portable Power Station, including over-charge, over-voltage、短絡保護など。
重要： Do not cover the ventilation grilles on the unit during operation to ensure proper heat dissipation and prevent overheating. Always operate the power station in a well-ventilated area.
9. 保証とサポート
The Baseus ioTa 420W Portable Power Station comes with a worry-free 2-year warranty. For customer service, technical support, or warranty claims, please refer to the contact information provided in the user manual included with your product or visit the official Baseus webサイト。