KICKASS KICKASS 22A Smart Charger (B0BZP52QS1)

キックアス 12V 22A 9-Stage Automatic Smart ACDC Battery Charger

ユーザーマニュアル

Model: KICKASS 22A Smart Charger (B0BZP52QS1)

1. はじめに

Thank you for choosing the KICKASS 12V 22A 9-Stage Automatic Smart ACDC Battery Charger. This advanced charger is designed to keep your vehicle's battery healthy, charged, and ready for use. It automatically detects damaged batteries, intuitively repairs them, and actively provides long-term battery maintenance, ensuring peak performance for years.

This charger is compatible with a wide range of battery chemistries, including Lithium (LiFePO4), AGM, GEL, Sealed Lead Acid, and Flooded Lead Acid batteries. It is ideal for charging various battery types such as starter, deep-cycle, marine, and powersports batteries.

含まれるもの

Diagram showing included components: 110V Plug, Anderson Connector, LCD Read Out Screen, Alligator Clamps, and Hook for Hanging.

図 1: 含まれるコンポーネント。 The image displays the KICKASS 22A Smart Charger along with its accessories: a 110V plug, an Anderson connector, alligator clamps, and a hook for hanging the unit. The charger features an LCD screen for readouts.

パッケージには以下のアイテムが含まれている必要があります:

  • KICKASS 12V 22A Smart Charger Unit
  • 110VAC電源コード
  • Anderson Connector Cable
  • Anderson to Alligator Clip Adapter Cable
  • ユーザーマニュアル(このドキュメント)

2. 安全情報

Always read and understand all safety warnings and instructions before using the battery charger. Improper use can result in serious injury or property damage.

一般的な安全上の注意事項

  • 換気の良い場所で充電器を使用してください。
  • 充電器を雨や濡れた状態にさらさないでください。
  • お子様の手の届かない場所に保管してください。
  • バッテリーへの接続や切断を行う前に、充電器を電源コンセントから外してください。
  • 凍結したバッテリーを充電しないでください。

保護機能

The KICKASS charger is built with comprehensive protection features to safeguard both the charger and your battery:

  • 極性保護: The charger will not activate if the battery terminals are connected incorrectly. An error will be indicated on the display.
  • 短絡保護: ショート時の損傷を防ぎます。
  • 過熱保護: The charger will reduce output or shut down if it detects overheating.
  • 過電流保護: 過剰な電流の引き込みから保護します。
  • メモリの充電: The charger retains the last selected charging mode, simplifying repeated use.

3. セットアップ

充電器の接続

The charger offers flexible connection options:

  • Anderson Connectors: Connect the charger directly to a charge input Anderson connection on your battery box or system.
  • ワニ口クリップ: Use the included Anderson to alligator clip attachment to connect directly to your battery terminals. Ensure correct polarity (red to positive, black to negative).
KICKASS 12V 22A Smart Charger with all cables and connectors laid out.

Figure 2: Charger with Cables. This image shows the KICKASS 22A Smart Charger unit along with its power cord, Anderson connector, and alligator clip adapter, illustrating the various connection methods available.

取り付けオプション

The charger is designed for convenient installation:

  • 複数の取り付けポイント: Four convenient mounting points allow for easier and simpler installation to your caravan, camper, or canopy’s 12V power setup.
  • フック取り付け: Includes a hook mounting option if you wish to hang the charger from a wall or ceiling.

4。 動作モード

The KICKASS 22A Smart Charger features a sophisticated 9-stage charging process and various modes to optimize battery health and charging efficiency. The easy-to-read LCD display indicates battery voltage level, charge mode, and any fault codes.

KICKASS 22A Smart Charger connected to a battery, showing 13.3V on its LCD display.

Figure 3: Charger in Operation. The image shows the KICKASS 22A Smart Charger connected to a battery, with its LCD screen displaying a voltage of 13.3V, indicating active charging or monitoring.

9-Stage 充電プロセス

This multi-stage process ensures optimal charging and extends battery life:

  1. 脱硫酸化: 硫酸化した電池を回収します。
  2. ソフトスタート: 完全に放電したバッテリーにゆっくりと電流を流します。
  3. バルクチャージ: 最大電流でバッテリーを約 80% の容量まで充電します。
  4. 吸収: バッテリーを100%まで充電しますasing 電流。
  5. 分析: Tests the battery's ability to hold a charge.
  6. 再調整: Restores deeply discharged or neglected batteries.
  7. フロートチャージ: バッテリーを100%充電状態に維持します。
  8. パルス維持: Applies pulses to keep the battery optimized during long-term storage.
  9. 待機する: The charger enters a low-power state when charging is complete.

Specific Charging Modes

With the touch of a button, you can change your device’s charging modes:

  • AGM Recondition Mode: Designed to bring old AGM batteries back to life, especially if they have been unused for a long period or have gone through a deep discharge.
  • Lithium (7A) & Standard (7A) Trickle/Slow Charge Battery Modes: Ideal for charging smaller capacity lithium and standard batteries. Recommended for Gel, SLA, FLA batteries between 10-50AH and Lithium Batteries between 15-120AH (related to battery's BMS setting).
  • Lithium Activation Mode: If your Lithium battery drops below its safety voltage parameters, toggle this mode. The charger will trickle charge the battery until it reaches the cut-in voltage, then automatically start normal charging cycles.
  • Quiet Night Mode (5A): Lowers the output to 5A, allowing for quiet overnight charging without noisy fans. This mode can be activated on any charging setting.
KICKASS 22A Smart Charger hanging, with icons for 22A Charging Speed, 9-Stage Smart Charging, and Maximum Protection.

図 4: 主な機能 This image highlights the main features of the KICKASS 22A Smart Charger: its 22A charging speed, 9-stage smart charging capability, and maximum protection features, emphasizing its versatility and safety.

製品終了view ビデオ

Video 1: 5 Reasons You Need The KickAss 22A Smart Battery Charger! このビデオでは、view of the key benefits and features of the KICKASS 22A Smart Charger, demonstrating its compatibility with various battery types, fast charging capabilities, and user-friendly operation.

5. メンテナンス

Proper maintenance ensures the longevity of your charger and batteries:

  • 充電器を清潔に保ち、ほこりや破片がないようにしてください。
  • 充電器を使用しないときは、乾燥した涼しい場所に保管してください。
  • Inspect cables and connectors regularly for any signs of damage. Replace if necessary.
  • 過熱を防ぐために、充電中は適切な換気を確保してください。

6。 トラブルシューティング

The LCD screen will display any fault codes to indicate issues with your battery or charger. Refer to the display for specific error messages.

一般的な問題と解決策:

  • 充電器がオンにならない: Check power connection. Ensure battery connections are correct (polarity protection).
  • Fault code displayed: Consult the charger's LCD screen for the specific code. Common codes relate to reverse polarity, short circuit, or over-temperature. Correct the issue as indicated.
  • バッテリーが充電されない: Verify battery type selection matches the connected battery. Check battery health; severely damaged batteries may not accept a charge.

7. 仕様

Table of specifications for the KICKASS 22A Smart Charger, including input voltage, charging current, and operating temperature.

図 5: 製品仕様 This image presents a detailed table outlining the technical specifications of the KICKASS 22A Smart Charger, including input/output parameters, charging modes, and environmental conditions.

説明仕様
入力ボリュームtage /周波数105-132VAC/60Hz
無負荷電力消費≤3W (Measured at 120VAC)
Maximum Input Current/Power≤6A/450W (Measured at 120VAC)
効率≥73% (Under Full Load)
力率≥0.91 (Measured at 120VAC Under Full Load)
Charging Current (Fast Mode)22A
Hi-Pot Test3000VAC
保護レベルIP20
動作温度14-104°F(-10-40°C)
アイテム重量4ポンド(1.814kg)
製品寸法3.14 x 10.2 x 4.8インチ
出力巻tage120ボルト
仕様が満たされましたCE、RoHS

Charging Mode & Recommended Battery Capacity

充電モード最大充電電流推奨バッテリー容量
STD Slow Mode4A10-50AH
STD Fast Mode22A44-300AH
AGM Fast Mode22A44-300AH
Lithium Slow Mode7A15-100AH (Related to battery's BMS setting)
Lithium Fast Mode22A44-300AH (Related to battery's BMS setting)
Lithium Activation Mode22A44-300AH (Related to battery's BMS setting)

8. 保証とサポート

For detailed warranty information and customer support, please refer to the official KICKASS webサイトをご覧いただくか、販売店にお問い合わせください。

使用説明書(IFU)の電子版はダウンロード可能です。

使用説明書(PDF)をダウンロード

© 2025 KICKASS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.