eSynic 3 Pack Walkie Talkies Kit - Instruction Manual

箱の中身

The eSynic 3 Pack Walkie Talkies Kit includes the following components:

• 3 x eSynic Professional Walkie Talkies
• 3 x Rechargeable 1500mAh Li-ion Batteries
• USB充電ベース3個
• 3×イヤホン
• 3 xベルトクリップ
• 3 x Lanyards/Slings
• ユーザーマニュアル x 1

Image: Contents of the eSynic 3 Pack Walkie Talkies Kit, showing three walkie talkies, charging bases, earpieces, and other accessories.

設定

1. バッテリーの取り付け:

   Remove the battery cover on the back of the walkie talkie. Insert the 1500mAh Li-ion battery, ensuring proper alignment of the contacts. Securely close the battery cover.

   

   Image: A close-up of the eSynic walkie talkie, illustrating the back panel where the battery is installed.

2. バッテリーの充電:

   Place the walkie talkie into its dedicated USB charging base. Connect the USB cable to a 5V power source (e.g., USB wall adapter, computer, power bank). The indicator light on the charging base will show red during charging and turn green when fully charged. A full charge typically takes approximately 3 hours.

   

   Image: A walkie talkie placed in its charging base, connected via USB. The image highlights the charging indicator light.
3. 付属品の取り付け：

   Attach the antenna by screwing it clockwise onto the top of the walkie talkie. For the belt clip, align it with the screw holes on the back of the unit and secure it with the provided screws. The lanyard can be attached to the designated loop for easy carrying.

   

   Image: A person wearing an eSynic walkie talkie with a belt clip, demonstrating how it can be carried.

操作手順

The following video demonstrates key operating functions of the eSynic Walkie Talkies:

Video: A demonstration of the eSynic Professional Walkie Talkies, showing power on, channel selection, Push-to-Talk (PTT) function, and flashlight activation.

1. 電源オン/オフと音量コントロール:

   Rotate the top-left knob clockwise to turn the walkie talkie ON (as shown at 0:00-0:05 in the video). Continue rotating to adjust the volume. Rotate counter-clockwise until a click is heard to turn the device OFF.
2. チャンネル選択:

   Rotate the top-right knob to select one of the 16 available channels (as shown at 0:05-0:09 in the video). Ensure all walkie talkies intended for communication are set to the same channel and frequency.

3. プッシュ・ツー・トーク（PTT）機能：

   To transmit your voice, press and hold the "PTT" button located on the side of the walkie talkie (as shown at 0:16-0:21 in the video). Speak clearly into the microphone. Release the button to listen for incoming transmissions.

4. VOX (Voice-Activated Transmission) Function:

   The walkie talkies feature VOX technology, allowing hands-free communication without pressing the PTT button. Refer to the full user manual for detailed instructions on activating and adjusting VOX sensitivity.

   

   Image: Depicts a user utilizing the hands-free VOX function with an earpiece.

5. 懐中電灯機能:

   Press the designated flashlight button (usually one of the orange buttons on the side) to activate the built-in LED flashlight (as shown at 0:24-0:27 in the video). Press again to cycle through modes (e.g., steady, blinking) or turn off.

メンテナンス

• クリーニング： 柔らかくてamp トランシーバーの外側を布で拭いてください。刺激の強い化学薬品や研磨剤入りの洗剤は使用しないでください。
• バッテリーのケア： To prolong battery life, avoid overcharging and fully discharging the battery regularly. Store the walkie talkie and batteries in a cool, dry place when not in use for extended periods.
• ストレージ： Store the walkie talkies in a safe place away from extreme temperatures, direct sunlight, and moisture.

トラブルシューティング

仕様

保証とサポート

保証： The eSynic 3 Pack Walkie Talkies Kit comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use.

カスタマーサポート: For any questions, technical assistance, or warranty claims, please contact eSynic customer support through the retailer's platform or visit the official eSynic web連絡先情報のサイト。

詳細については、 eSynic Store.