1.製品オーバーview
The Bme Georgina Signature King Bed Frame is designed with a handcrafted geometric headboard, offering a blend of rustic and modern aesthetics. Constructed from solid acacia wood and supported by matte black metal legs, this bed frame provides robust support for your mattress without the need for a box spring.
主な特徴:
- Handcrafted Geometric Headboard: Features a unique 3D geometric pattern, enhancing the wood's natural beauty.
- 耐久性のある構造: Made from sustainable solid acacia wood with sturdy metal legs for exceptional stability.
- 高い耐荷重: Supports up to 800 pounds, ensuring reliable and stable sleep.
- Wood Slat Support System: Provides complete mattress support and breathability, eliminating the need for a box spring.
- 簡単な組み立て： Designed for straightforward setup with all necessary parts and tools included.
Image 1.1: The Bme Georgina Signature King Bed Frame, showcasing its teak brown finish and geometric headboard design.
2. 安全情報
Please read and follow all safety instructions to prevent injury and ensure proper assembly and use of your bed frame.
- 2人での組み立て: It is highly recommended that two people assemble this bed frame together.
- 手袋の使用: Wear gloves during the assembly process to protect your hands.
- Drilling Tool: A drilling tool may assist with the setup, though not strictly required.
- 重量制限： 最大推奨重量 800 ポンドを超えないようにしてください。
3. パッケージ内容
組み立てを始める前に、下記のすべての部品が揃っていることを確認してください。部品が不足または破損している場合は、カスタマーサポートまでご連絡ください。
- ヘッドボード
- Bed frame rails (side rails, footboard)
- スラット
- 取り付けハードウェア（ボルト、ワッシャー、六角レンチ）
- 組み立てマニュアル
Image 3.1: All components included in the package for the Georgina Bed Frame, laid out for identification.
4. セットアップと組み立て手順
正しく組み立てるために、以下の手順を慎重に実行してください。ベッドフレームは、使用する部屋で組み立てることをお勧めします。
- コンポーネントを解凍します: Carefully remove all parts from the packaging and lay them out on a clean, soft surface (e.g., a rug or blanket) to prevent scratches. Identify all parts against the package contents list.
- サイドレールをヘッドボードに取り付けます。 Connect the side rails to the headboard using the provided bolts and Allen wrench. Ensure all connections are secure but do not fully tighten until all major components are in place.
- フットボードを取り付ける: Connect the footboard to the other end of the side rails. Again, secure with bolts and partially tighten.
- センターサポート脚を取り付けます（該当する場合）: If your model includes center support legs, attach them to the designated crossbeams or frame sections.
- スラットを挿入: Place the wooden slats across the bed frame. Many models feature Velcro strips or pegs to secure the slats in place. Ensure slats are evenly spaced and firmly seated.
- 最終締め付け: Once all components are in place and aligned, fully tighten all bolts. Do not overtighten.
- 検査: Double-check all connections to ensure the frame is stable and secure before placing a mattress on it.
Video 4.1: An assembly video demonstrating the step-by-step process for setting up the Bme Georgina Bed Frame. This video shows how to connect the frame components and install the slats.
画像4.2: 詳細 view of the bed frame's construction, highlighting the wood slat system and the secure fit for a mattress.
5. 操作手順
The Bme Georgina Bed Frame is designed for straightforward use once assembled.
- マットレスの配置: Place your King-sized mattress directly onto the wooden slats. No box spring is required.
- 重量配分： Ensure weight is distributed evenly across the bed frame. The frame is designed to support up to 800 pounds.
- 動き： ベッドフレームを移動する際は、脚やフレーム構造の損傷を防ぐために、引きずるのではなく持ち上げてください。
6. メンテナンス
Proper care will extend the life and appearance of your Bme Georgina Bed Frame.
- クリーニング： 木の表面を柔らかくて乾いた布で拭きます。amp 布で拭いてください。仕上げを傷める可能性のある、刺激の強い化学薬品や研磨剤入りの洗剤は使用しないでください。
- ダスティング： 定期的に乾いた柔らかい布でフレームのほこりを拭いてください。
- ハードウェアを締めます: Periodically check and tighten all bolts and screws to maintain stability.
- 直射日光を避けてください: Prolonged exposure to direct sunlight can cause wood to fade or dry out.
- 湿度コントロール: 木材の反りや割れを防ぐために、室内の湿度を一定に保ちます。
7。 トラブルシューティング
ベッドフレームに問題が発生した場合は、次の一般的な解決策を参照してください。
- きしみ音: Squeaking often indicates loose connections. Re-tighten all bolts and screws on the frame, especially where the side rails connect to the headboard and footboard, and where the slats rest.
- 不安定さ/ぐらつき: Ensure all legs are firmly attached and all frame connections are fully tightened. Check that the bed frame is on a level surface.
- スラットシフト: Verify that the slats are correctly positioned and secured by any provided Velcro or pegs. If slats continue to shift, ensure they are evenly distributed and consider adding non-slip pads if necessary.
- 損傷した部品: If any part is damaged during assembly or use, discontinue use and contact customer support for replacement parts.
8. 仕様
Detailed specifications for the Bme Georgina King Bed Frame (Model ZW1X).
Image 8.1: Dimensional diagram of the Bme Georgina King Bed Frame, illustrating overall size and key measurements.
| 特徴 | 詳細 |
|---|---|
| モデル番号 | ZW1X |
| サイズ | 王 |
| 製品寸法（長さ x 幅 x 高さ） | 84.25インチ x 78.35インチ x 43.19インチ |
| 材料 | Acacia Wood, Metal Legs |
| ヘッドボードの素材 | アカシア材 |
| 色 | Teak Brown |
| 最大重量の推奨 | 800 ポンド |
| 地面からアイテムまでの距離 | 7.36インチ |
| 組み立てが必要 | はい |
| 含まれるコンポーネント | Headboard, Bed frame, Slats, Installation Hardware, Assembly Manual |
9. 保証とサポート
Bme is committed to providing quality products and customer satisfaction.
- メーカー保証: This product comes with a 5-year manufacturer warranty. For more information or to make a claim, please contact the seller directly.
- 返品規則： A 30-day return policy is available. Please refer to your purchase platform for specific return instructions.
- カスタマーサポート: For any questions, missing parts, or assistance with assembly, please contact Bme customer service. Refer to the contact information provided with your purchase or visit the official Bme webサイト。