導入
This manual provides comprehensive instructions for the safe and effective operation and maintenance of your Master Airbrush Cordless Airbrushing System. Please read this manual thoroughly before use to ensure optimal performance and longevity of your equipment.
The Master Airbrush Cordless Airbrushing System is a portable and powerful tool designed for various applications, including hobbies, crafts, auto graphics, makeup, temporary tattoos, cake decorating, model painting, fine art, and nail art. It features a precision dual-action airbrush with a 0.4mm tip and a rechargeable air compressor with four airflow speed settings.
安全情報
怪我や製品の損傷を防ぐために、次の安全上の注意事項を守ってください。
- エアブラシは常に換気の良い場所で操作してください。
- Wear appropriate personal protective equipment, such as a respirator mask and safety glasses, when spraying paints or chemicals.
- Keep the airbrush system away from children and pets.
- Do not immerse the compressor unit in water or other liquids.
- Use only the provided charging cable and a compatible 2A or 3A fast charger.
- Avoid spraying flammable materials near open flames or ignition sources.
- Disconnect the power source before cleaning or performing maintenance.
- Do not modify the airbrush or compressor in any way.
パッケージ内容
パッケージにすべてのアイテムが含まれていることを確認します。
- コードレス空気圧縮機
- Precision Dual-Action Airbrush with 0.4mm tip
- 5 Screw-on Gravity Feed Cups (2cc, 6cc, 7cc Metal, 12cc, 24cc)
- 4フィートのエアホース
- エアブラシホルダー
- レンチ
- スポイト
- クリーニングブラシ5本
- 4 Oリング
- USB-C充電ケーブル
- 取扱説明書
製品終了view
The Master Airbrush Cordless System consists of two primary units: the air compressor and the dual-action airbrush, complemented by various accessories.
エアコンプレッサ
- 電源ボタン: コンプレッサーをアクティブ化および非アクティブ化します。
- LEDディスプレイ： Shows current airflow level (P1-P4) and battery charge status.
- Airflow Adjustment Button: Cycles through four airflow speed settings (P1: Low, P2: Medium, P3: High, P4: Extra-High).
- USB-C Charge Connector: For recharging the internal Lithium-Ion battery.
- エアブラシホルダー: Conveniently stores the airbrush when not in use.
デュアルアクションエアブラシ
- トリガー： Controls both air and fluid flow. Pushing down releases air; pulling back releases fluid.
- Nozzle Cap: Protects the needle and nozzle.
- Fluid Cups: Interchangeable cups for holding paint.
- Preset Control Knob: Located at the rear of the airbrush, this knob limits the backward travel of the trigger, allowing for consistent line thickness.
- Quick Flush Cutaway Handle: Enables quick access to the needle chucking nut for flushing and cleaning air passages.
設定
- Charge the Compressor: Before first use, fully charge the compressor using the provided USB-C cable and a 2A or 3A fast charger. The LED display will indicate charging status. A full charge takes approximately 35 minutes.
- エアホースを取り付けます: Connect one end of the 4-foot air hose to the air outlet on the compressor and the other end to the airbrush. Ensure connections are secure to prevent air leaks.
- 液体カップを選択して取り付けます: Choose the appropriate size fluid cup for your project and screw it onto the top of the airbrush.
- Mount Airbrush Holder (Optional): The airbrush holder can be attached to the side of the compressor for convenient storage.
操作手順
- Prepare Your Paint: The 0.4mm tip is suitable for light to medium viscosity acrylic paint, makeup, water-based paint, food coloring, or other liquid media. Thicker paints may require dilution. Test paint consistency on a scrap surface before applying to your project.
- Fill the Fluid Cup: Use the eyedropper to carefully fill the selected fluid cup with your prepared paint. Do not overfill.
- Power On the Compressor: Press the power button on the compressor. The LED display will show the current airflow level (P1 by default).
- エアフローを調整します: Press the airflow adjustment button to cycle through the four pressure settings (P1 to P4) to achieve the desired air pressure for your application (20 to 36 PSI).
- スプレーを開始します:
- Hold the airbrush approximately 2-6 inches from your surface.
- Push down on the trigger to start airflow.
- While maintaining airflow, gently pull the trigger back to release paint. The further back you pull, the more paint will be released.
- Adjust the preset control knob at the rear of the airbrush to limit trigger travel for consistent lines.
- Move the airbrush smoothly and consistently across your surface.
- 噴霧を停止します: Release the trigger forward to stop paint flow, then release the trigger upwards to stop airflow.
- 電源を切る： Press the power button on the compressor to turn it off when finished.
メンテナンス
Proper cleaning and maintenance are crucial for the longevity and performance of your airbrush system.
使用後：
- 空の液体カップ: Remove any remaining paint from the fluid cup.
- リンス： Fill the cup with an appropriate cleaning solution (water for water-based paints, specific cleaner for acrylics/makeup). Spray the cleaner through the airbrush until it runs clear.
- バックフラッシュ: Place your finger over the nozzle cap and pull back the trigger. This will force air back into the fluid cup, bubbling and cleaning the inside of the cup and paint passage. Repeat with fresh cleaning solution.
- Clean Needle and Nozzle: Use the provided cleaning brushes to gently clean the inside of the fluid cup and around the needle. For thorough cleaning, you may need to remove the needle and nozzle (refer to the detailed diagram in the manual for component identification).
- 拭き取る: Wipe the exterior of the airbrush and compressor with a clean, damp 布。
定期メンテナンス:
- Periodically lubricate the needle packing with airbrush-specific lubricant.
- Inspect O-rings for wear and replace if necessary (spare O-rings are included).
- Store the airbrush and compressor in a clean, dry place.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 空気の流れがない | Compressor not powered on; low battery; air hose disconnected. | Ensure compressor is on and charged; check air hose connections. |
| 塗料の流れがない | Clogged nozzle; paint too thick; needle bent or stuck; empty fluid cup. | Clean nozzle and needle; dilute paint; check needle for damage; refill cup. |
| 飛び散りや不均一なスプレー | Paint too thick or thin; air pressure too high or low; partially clogged nozzle; damaged needle. | Adjust paint consistency; modify air pressure; clean nozzle; inspect/replace needle. |
| 空気漏れ | 接続が緩んでいる、O リングが損傷している。 | すべての接続を締めます。O リングを点検し、損傷がある場合は交換します。 |
| Compressor battery drains quickly | Continuous high-pressure use; battery degradation over time. | Use intermittently for longer operation; ensure full charge before use. |
仕様
- ブランド： マスターエアブラシ
- モデル名: MAS TC-51
- Airbrush Tip Size: 0.4mm
- 最大動作圧力: 20 to 36 PSI (adjustable)
- 気流容量: 6 to 12 Liters Per Minute
- 電源: 電池式（リチウムイオン電池1個付属）
- 巻tage: 12ボルト
- 充電時間: Approximately 35 minutes (with 2A or 3A fast charger)
- 連続作業時間: 30分以上
- Intermittent Working Time: 1時間以上
- 騒音レベル: 65デシベル
- 商品の重量: 0.54 キログラム (1.2 ポンド)
- ホースの長さ: 4フィート
- 特別な機能: コードレス、ポータブル
保証とサポート
Master Airbrush stands behind its products. If you are not satisfied with this system at any time within the first year of purchase, the manufacturer will provide a refund or replacement.
For further assistance, technical support, or warranty claims, please refer to the contact information provided on the product packaging or visit the official Master Airbrush webサイト。