Intex Ultra Quadra XTR Frame Pool Set Instruction Manual

1. はじめに

This manual provides essential instructions for the safe assembly, operation, and maintenance of your Intex Ultra Quadra XTR Frame Pool Set (Model 2893200). This rectangular pool, measuring 549 x 274 x 132 cm, is designed for outdoor, freestanding use. Please read all instructions carefully before installation and keep this manual for future reference.

Figure 1: Assembled Intex Ultra Quadra XTR Frame Pool. This image shows the complete rectangular pool with its dark grey exterior and blue tiled interior pattern.

2. 安全情報

警告： Failure to follow these instructions can result in serious injury or death. Always supervise children. Drowning hazard exists. This pool is intended for outdoor use only.

• プール内やプールの近くに子供を放置しないでください。
• プールが水平で安定した表面に設置されていることを確認してください。
• Keep electrical devices away from the pool.
• プールに飛び込んだり飛び込んだりしないでください。
• 長期間使用しない場合は、プールを完全に空にしてください。
• Regularly inspect the pool for damage or wear.

3. パッケージ内容

Carefully unpack all items and check against the list below. If any parts are missing or damaged, do not proceed with assembly and contact Intex customer support.

• Intex Ultra Quadra XTR Frame Pool Liner (549 x 274 x 132 cm)
• 鉄骨フレーム部品（各種ポール、コネクタ）
• Pool Liner with 38 mm shut-off valve
• Inlet and Outlet Fittings (for water circulation, if a pump is added later)
• ドレン栓

注記： This pool set does ない include a filtration system, ladder, ground cloth, pool cover, skimmer, hoses, or cleaning kit. These items must be purchased separately if desired.

Figure 2: Assortment of pool parts. This image displays various components such as inlet/outlet fittings, gaskets, and caps, which are part of the pool's plumbing system.

4. セットアップと組み立て

Assembly typically requires two people and takes approximately 60 minutes. No additional tools or safety pins are required due to the precision locking system.

4.1 サイトの準備

1. 鋭利な物体、破片、急な傾斜のない、堅固で平らな場所を選択してください。
2. Ensure the chosen site is large enough for the pool (605 x 330 cm including support legs) and allows for safe access around it.
3. Clear any vegetation or grass from the area to prevent damage to the liner.

4.2 フレームの組み立て

1. Spread the pool liner evenly on the prepared ground.
2. Identify the different frame components (horizontal beams, vertical legs, corner joints).
3. 水平ビームをプール ライナーの上端にあるスリーブに挿入します。
4. コーナージョイントを使用して水平梁を接続します。
5. Attach the vertical support legs to the horizontal beams, ensuring they lock into place with the precision locking system.
6. Ensure all connections are secure and the frame is stable before proceeding.

4.3 Inlet and Outlet Installation

1. Locate the pre-cut holes in the pool liner for the inlet and outlet fittings.
2. Install the provided fittings according to the diagrams in the separate plumbing instructions (if applicable) or by pushing them through the liner from the inside and securing them with the external nuts/gaskets.
3. Ensure the 38 mm shut-off valve is correctly installed on the outlet.

Figure 3: Pool inlet and outlet fittings. This image shows the grey plastic fittings used for water circulation, including the shut-off valve and grilles.

5. プールの運営

5.1 プールを満たす

1. 排水プラグがしっかりと閉まっていることを確認してください。
2. プールに水を入れ始めます。水位が上がってきたら、ライナーの底のしわを優しく伸ばしてください。
3. Fill the pool to the recommended water height of 114 cm, which corresponds to approximately 90% capacity (17,203 liters). Do not overfill.

5.2 水処理

As this pool set does not include a filtration system, regular water treatment is crucial to maintain hygiene and water clarity. Consult a pool supply professional for appropriate chemicals and testing kits suitable for your pool's volume and local conditions. The pool is suitable for saltwater use if a compatible saltwater system is purchased separately.

6. メンテナンス

6.1 Cleaning the Pool

1. Regularly remove debris (leaves, insects) from the water surface using a skimmer net (not included).
2. Brush the pool walls and bottom to prevent algae growth.
3. For thorough cleaning, consider purchasing a compatible pool vacuum (not included).

6.2 排水と保管

1. To drain the pool, attach a garden hose to the drain valve and open the valve. Direct the water to a suitable drainage area.
2. Once empty, clean and dry the liner and frame components thoroughly.
3. 組み立て手順を逆に実行してフレームを分解します。
4. Store the pool liner and frame components in a dry, protected area, away from extreme temperatures and pests.

6.3 Liner and Frame Care

• The reinforced laminated vinyl liner (0.73 mm bottom, 0.73 mm wall) is durable, but avoid sharp objects.
• The high-quality powder-coated steel frame is designed for enhanced rust resistance and durability. Inspect for any signs of corrosion or damage periodically.

7。 トラブルシューティング

• 水漏れ: Check the drain plug, inlet/outlet fittings, and the pool liner for punctures. Use a repair patch kit (not included) for small liner holes.
• 不安定なフレーム: Ensure all frame components are fully connected and locked into place. Verify the pool is on a perfectly level surface.
• 濁った水: This indicates a need for water treatment. Test water chemistry and add appropriate chemicals. Regular cleaning is also essential.

8. 仕様

9. 保証とサポート

For warranty information or technical support, please contact Intex customer service directly. Refer to the packaging or the official Intex webお住まいの地域に適用される最新の連絡先情報と保証条件については、こちらのサイトをご覧ください。

Webサイト： www.intexcorp.com