Atlanta Digital LED Alarm Clock 2604/0 User Manual

導入

Thank you for choosing the Atlanta Digital LED Alarm Clock, Model 2604/0. This alarm clock features a large, continuously illuminated white LED display, adjustable brightness, two separate alarms with crescendo function, and a convenient USB charging port. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance of your device.

設定

1. 電源接続

Connect the provided power adapter to the DC5V port on the back of the alarm clock. Plug the adapter into a standard 230V electrical outlet. The clock requires a permanent power connection for full functionality.

Image: The Atlanta Digital Alarm Clock shown with its included power adapter and USB connection cable.

2. バッテリーバックアップ

The alarm clock includes an integrated CR2032 button cell battery (1 CR2032 - included). This battery serves as a backup to protect programmed data (time and alarm settings) in case of a power outage. It does not power the display or alarm functions independently.

画像: 背面 view of the alarm clock, highlighting the battery compartment, DC5V input, USB port, and control buttons/sliders.

操作手順

1.時間を設定する

1. を押し続けます 時間設定 button (located on the right side of the back panel) for 2 seconds until the display flashes.
2. 使用 12/24時間 button (left side of the back panel) to adjust the hours.
3. を押す 時間設定 もう一度ボタンを押すと分調整に切り替わります。 12/24時間 議事録を調整するボタン。
4. を押す 時間設定 もう一度ボタンを押して確定し、時間設定モードを終了します。

12時間表示と24時間表示を切り替えるには、 12/24時間 button when not in time setting mode.

Image: Front display of the alarm clock showing the time "12:50 PM".

2.アラームの設定

The clock supports two separate alarms.

1. を押し続けます アラームセット button (located on the right side of the back panel, below TIME SET) for 2 seconds until the alarm time flashes.
2. 使用 12/24時間 アラーム時間を調整するボタン。
3. を押す アラームセット もう一度ボタンを押すと分調整に切り替わります。 12/24時間 アラームの分数を調整するボタン。
4. を押す アラームセット もう一度ボタンを押して確定し、アラーム設定モードを終了します。
5. アラームをオンまたはオフにするには、 AL. オン/オフ button (left side of the back panel, below 12/24HR). An indicator on the display will show if the alarm is active.

アラームには クレッシェンド function, meaning the alarm sound starts softly and gradually increases in intensity.

3. スヌーズ機能

アラームが鳴ったら、大きな スヌーズ button on the top of the clock. This will temporarily silence the alarm for 5 minutes. The alarm will resume after 5 minutes.

4。 ディスプレイの明るさ調整

ディスプレイの明るさを調整するには、 ディマー slider located on the back panel. Slide it from "LOW" to "HIGH" to achieve your desired brightness level. The brightness is continuously adjustable.

5. アラーム音量調整

Adjust the alarm sound volume using the 音量 slider located on the back panel. Slide it from "LOW" to "HIGH" to set the desired alarm volume. The volume is continuously adjustable.

6.USB充電ポート

A USB port is located on the back of the alarm clock. You can use this port to charge other devices, such as a mobile phone. Connect your device's USB charging cable to this port.

メンテナンス

• To clean the clock, use a soft, dry cloth. Do not use abrasive cleaners or solvents.
• デバイスを水や高湿度に近づけないでください。
• Avoid exposing the clock to direct sunlight or extreme temperatures.
• If the backup battery needs replacement, ensure to use a CR2032 type battery.

トラブルシューティング

ディスプレイが明るすぎる、または暗すぎる場合:

調整する ディマー slider on the back panel. While the brightness is continuously adjustable, some users may find the minimum brightness still too high for a dark bedroom.

Clock loses time or settings during a power outage:

Ensure the CR2032 backup battery is correctly installed and functional. The backup battery preserves settings but does not power the display or alarm during an outage. If the battery is old or depleted, replace it.

アラームが鳴らない:

• Check if the alarm is activated using the AL. オン/オフ button. An indicator should be visible on the display.
• 確実に 音量 slider is not set to "LOW" or minimum.
• アラーム時間が正しく設定されていることを確認します。

USB charging port not working:

Ensure the alarm clock is properly connected to a power source. The USB port requires the clock to be powered. Check the charging cable of your device.

仕様

保証とサポート

For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer.