RAVAK NOHYLAGUNA

RAVAK Laguna Universal Bathtub Feet (NOHYLAGUNA) Installation Manual

Model: NOHYLAGUNA

1. はじめに

Thank you for choosing RAVAK Laguna Universal Bathtub Feet (NOHYLAGUNA). This manual provides essential instructions for the safe and correct installation, adjustment, and maintenance of your bathtub support system. Please read this manual thoroughly before beginning installation and retain it for future reference.

2. 安全情報

以下の安全上の注意事項を常に守ってください。

  • 取り付ける前に、すべてのコンポーネントが揃っていて損傷がないことを確認してください。
  • Installation should be performed by a qualified professional or a person with adequate technical knowledge.
  • 設置中は適切な個人用保護具(手袋、安全メガネなど)を着用してください。
  • Do not overtighten screws or fasteners, as this may damage the bathtub or the feet.
  • Verify the stability of the bathtub after installation and before use.
  • 設置場所から子供やペットを遠ざけてください。

3. パッケージ内容

The RAVAK Laguna Universal Bathtub Feet package typically includes:

  • Adjustable bathtub feet (quantity as per bathtub model requirement)
  • 取り付け金具(ネジ、ワッシャーなど)
  • インストール手順(このマニュアル)

Note: Specific components may vary slightly depending on the bathtub model and region.

4. セットアップとインストール

These feet are designed for RAVAK Laguna bathtubs. Ensure your bathtub is compatible before proceeding.

4.1 Attaching the Feet to the Bathtub

  1. Carefully turn the bathtub upside down on a soft, protective surface to prevent scratches.
  2. Locate the designated mounting points on the underside of the bathtub. These are typically reinforced areas.
  3. Position each foot assembly onto its respective mounting point. Ensure the foot is oriented correctly.
  4. Secure the feet using the provided screws and hardware. Tighten firmly but do not overtighten.
Image showing the attachment of RAVAK Laguna bathtub feet to the underside of a bathtub.

Figure 1: Illustration of how the adjustable feet attach to the underside of the RAVAK Laguna bathtub.

4.2 高さの調整

The RAVAK Laguna Universal Bathtub Feet are adjustable from 80mm to 195mm, allowing for precise leveling and desired height.

  1. Once all feet are attached, carefully turn the bathtub upright and place it in its intended position.
  2. Use a spirit level to check the bathtub's levelness in all directions.
  3. Adjust the height of each foot by rotating the threaded mechanism. Turn clockwise to lower and counter-clockwise to raise.
  4. Continue adjusting until the bathtub is perfectly level and stable. Ensure all feet are making firm contact with the floor.
Image showing a person adjusting the height of a RAVAK Laguna bathtub foot using the threaded mechanism.

Figure 2: Demonstrating the height adjustment mechanism of the RAVAK Laguna bathtub feet.

4.3 Wall Mounting (Optional, if applicable)

For enhanced stability, some RAVAK Laguna bathtubs may utilize wall mounting hooks. Refer to your specific bathtub's manual for details on integrating these with the feet installation.

  • If wall hooks are used, ensure they are securely fastened to a structurally sound wall.
  • Align the bathtub with the wall hooks before final leveling adjustments.

5. メンテナンス

Regular maintenance ensures the longevity and stability of your bathtub feet.

  • クリーニング: Clean the feet with a soft cloth and mild, non-abrasive cleaning agents. Avoid harsh chemicals that could damage the material.
  • 検査: Periodically check the feet for any signs of wear, corrosion, or damage. Ensure all mounting screws remain tight.
  • 安定性チェック: Occasionally verify the bathtub's stability and levelness. Re-adjust the feet if necessary.

6。 トラブルシューティング

問題考えられる原因解決
Bathtub is unstable or wobbly.Feet are not evenly adjusted or not all feet are touching the floor.Re-adjust the height of each foot until the bathtub is level and stable. Ensure all feet bear weight.
浴槽が水平ではありません。高さ調整が正しくありません。Use a spirit level to identify uneven areas and adjust individual feet accordingly.
Feet appear damaged or corroded.Exposure to harsh chemicals or physical impact.Replace damaged feet immediately to ensure structural integrity. Contact RAVAK support for replacement parts.

7. 仕様

  • ブランド: ラバック
  • モデル: NOHYLAGUNA
  • 製品タイプ: Universal Bathtub Feet
  • 調整可能な高さの範囲: 80mm - 195mm
  • 互換性: Designed for RAVAK Laguna bathtubs
  • ASIN: B0BPH1MFJR

8.保証とサポート

For warranty information, technical support, or to order replacement parts, please contact RAVAK customer service or visit the official RAVAK webサイトでご確認ください。保証請求に備えて購入証明書を保管してください。

注意: 具体的な保証条件は地域によって異なる場合があります。

© 2023 RAVAK. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.