導入
This manual provides detailed instructions for the installation, operation, and maintenance of your Jansite H11 Wireless Solar Tire Pressure Monitoring System (TPMS). This system is designed to enhance driving safety by providing real-time tire pressure and temperature data, alerting you to potential issues.
The Jansite H11 TPMS features a 3.5-inch color display, supports 2-wheel and 4-wheel modes, offers precise pressure readings to 0.01 bar, and includes multiple alarm functions. It is equipped with external sensors and supports dual solar/Type-C charging.
製品終了view
The Jansite H11 TPMS is an advanced system designed for accurate and reliable tire monitoring. Key features include:
- 2-Wheel/4-Wheel Switchable Mode: Compatible with both 2-wheel (e.g., trailers) and 4-wheel vehicles (e.g., cars, SUVs).
- 高精度センサー: Provides tire pressure readings accurate to 0.01 bar (or 0.01 psi), ensuring precise data.
- Large 3.5-inch Color Display: Offers clear visibility of tire data with automatic brightness adjustment for various lighting conditions.
- デュアル充電オプション: Integrated solar panel for continuous charging and a Type-C port for wired charging, ensuring uninterrupted operation.
- Intelligent On/Off: Features vibration detection to automatically turn on when the vehicle starts and enter sleep mode after 5 minutes of inactivity.
- 6種類のアラームモード: Alerts for fast air leak, high pressure, low pressure, high temperature, sensor failure, and low battery.
- Durable External Sensors: Designed for reliability and ease of installation.
図1：以上view of Jansite H11 TPMS features, including 2/4-wheel mode, 3.5-inch display, Type-C charging, and durable sensors.
セットアップとインストール
Follow these steps to set up your Jansite H11 TPMS:
- モニターを充電する: Before first use, fully charge the monitor using the provided Type-C USB cable. The monitor also charges via its solar panel when exposed to sunlight.
Figure 2: The TPMS monitor supports both solar and Type-C USB charging for continuous power.
- モニターをマウントします。 Choose one of the two mounting options:
- Windshield Mounted: Attach the monitor to the windshield using the adhesive bracket. Ensure it does not obstruct your view.
- Center Console Mounted: Place the monitor on the center console using the adhesive base. The unique separate design allows for angle adjustment.
Note: The monitor can be detached from its support by sliding it upwards. Consider this when choosing a mounting location to allow for easy removal if needed.
Figure 3: The monitor offers flexible mounting options for windshield or center console placement.
- Install External Sensors:
- Unscrew the original valve caps from your tires.
- Screw on the corresponding external sensors (marked FL, FR, RL, RR for Front Left, Front Right, Rear Left, Rear Right). Ensure they are tightened securely to prevent air leaks.
- The sensors are pre-paired at the factory. If re-pairing is needed, refer to the "Operating" section.
- Select 2-Wheel or 4-Wheel Mode: The system supports switching between 2-wheel and 4-wheel modes. This setting is crucial for accurate monitoring, especially for trailers or specific vehicle configurations. Refer to the "Operating" section for instructions on how to switch modes.
Figure 4: The system supports flexible 2-wheel or 4-wheel mode switching for various vehicle types.
操作手順
Once installed, the Jansite H11 TPMS operates largely automatically.
Automatic On/Off and Sleep Mode
- 自動アクティベーション： The monitor will automatically turn on and begin displaying tire data when it detects vehicle vibration (e.g., when you start driving).
- 自動スリープモード: If no vibration is detected for 5 minutes (e.g., after parking), the monitor will automatically enter sleep mode to conserve power.
Figure 5: The TPMS features intelligent on/off functionality based on vibration detection and automatic sleep mode.
情報を表示
The 3.5-inch display shows real-time tire pressure and temperature for each tire. It also indicates battery status and alarm signs.
図6：詳細 view of the TPMS display, highlighting pressure, temperature, units, and alarm indicators.
アラーム機能
The system provides 6 types of alarms to ensure driving safety:
- Fast Air Leak Alarm: Alerts rapidly to sudden pressure drops.
- 高圧警報: Warns if tire pressure exceeds the set high limit.
- 低圧アラーム: Warns if tire pressure falls below the set low limit.
- 高温アラーム： Alerts if tire temperature exceeds the safe limit.
- センサー故障アラーム: Indicates a malfunction or loss of signal from a sensor.
- 低電池アラーム: Notifies when the monitor's internal battery is low.
Setting Alarm Values and Units
You can customize the high and low pressure alarm thresholds for front and rear wheels separately, and switch between pressure units (PSI/Bar) and temperature units (°F/°C).
- アクセス設定: Typically, a long press on a specific button (refer to the device's physical buttons, usually 'M' or 'Set') will enter the settings menu.
- Navigate Options: Use the navigation buttons (e.g., left/right arrows or '+' / '-') to cycle through settings like pressure units, temperature units, and alarm thresholds.
- 値を調整: Use the adjustment buttons to increase or decrease the desired values.
- 設定を保存: Confirm your selections, usually by pressing the 'M' or 'Set' button again.
図7：例ample of setting high and low pressure alarm values for front and rear tires.
メンテナンス
- モニター充電: Ensure the monitor receives sufficient sunlight for solar charging. If operating in low light conditions or at night, use the Type-C USB cable to charge the device.
- センサーバッテリー: The external sensors have internal batteries. If a sensor low battery alarm occurs, the sensor may need replacement. Consult customer support for sensor replacement.
- クリーニング： Clean the monitor screen and sensors with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Sensor Security: Periodically check that the external sensors are securely tightened on the tire valves to prevent air leakage.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| モニターがオンになりません。 | バッテリー残量が少なく、振動が検出されません。 | Charge the monitor via Type-C USB. Start the vehicle and drive to activate vibration detection. |
| No tire data displayed / Sensor failure alarm. | Sensor not installed correctly; sensor battery low; sensor out of range (for 2-wheel mode with trailer). | Re-install sensor securely. Check sensor battery (if replaceable, or consider replacement). Ensure monitor is within effective range of sensors (especially for trailers, max 5.8m). |
| 不正確な圧力測定値。 | Sensor not calibrated; incorrect unit setting. | Ensure sensors are correctly installed. Verify pressure unit (PSI/Bar) setting on the monitor. Compare with a reliable tire gauge. |
| アラームが頻繁に鳴る。 | Alarm thresholds set too narrow; actual tire pressure/temperature is outside normal range. | Adjust high/low pressure and temperature alarm thresholds to appropriate values for your vehicle. Check actual tire pressure and inflate/deflate as needed. |
| Vibration detection not working (monitor stays off). | System malfunction or sensitivity issue. | Ensure the monitor is fully charged. Try restarting the device if possible (refer to specific button combinations in the full manual if available). If issue persists, contact customer support. |
仕様
- モデル： H11 (JM-TYH11-EU2)
- ブランド： ジャンサイト
- 表示サイズ: 3.5インチ
- 圧力精度： ±0.01 bar (or ±0.01 psi)
- 圧力範囲: 21-87 psi (approximately 1.5 - 6.0 bar)
- 充電： Solar / USB Type-C
- 動作モード: 2-wheel / 4-wheel switchable
- センサータイプ: 外部の
- 商品の重量: 220グラム
- 製品寸法（モニター）: 0.8 x 5 x 12 cm (長さ x 幅 x 高さ)
保証とサポート
For warranty information, technical support, or replacement parts, please contact Jansite customer service through your original point of purchase or visit the official Jansite website. Please have your product model (H11) and purchase details ready when contacting support.
Note: The effective working distance for sensors, especially in 2-wheel mode with a trailer, is approximately 5.8 meters (19.7 ft). Exceeding this distance may lead to signal loss.