Tenda NVR N3L-8H 4K 8CH ネットワーク ビデオ レコーダー ユーザー マニュアル

導入

This manual provides detailed instructions for the installation, operation, and maintenance of your Tenda NVR N3L-8H 4K 8CH Network Video Recorder. Please read this manual thoroughly before using the device to ensure proper setup and functionality. The Tenda N3L-8H supports up to 8-channel 8MP/4K network camera inputs, 4-channel 1080p decoding, and up to 10TB HDD storage.

Image: Tenda N3L-8H NVR device highlighting 4K Ultra HD capabilities.

箱の中身

パッケージにすべてのアイテムが揃っていることを確認します。

• Tenda N3L-8H 8 Channel Non-PoE NVR
• 電源アダプター
• USBマウス
• HDD取り付け用ネジ
• クイックインストールガイド

Image: Unpacked contents of the Tenda N3L-8H NVR box.

セットアップガイド

Follow these steps to set up your Tenda NVR N3L-8H.

1. ハードドライブの取り付け

The NVR supports up to 10TB HDD (not included). Install the hard drive before initial setup.

1. Unfasten the screws on the bottom cover of the NVR.
2. Carefully remove the cover to expose the internal components.
3. Insert the hard disk drive into the designated slot, ensuring it connects properly to the SATA interface.
4. Fix the hard disk drive securely with the provided screws.
5. Reinstall the cover and fasten the screws.

画像: 内部 view of the NVR with the hard drive installed.

2. 初期接続

Connect the necessary peripherals to the NVR.

1. USB マウスを NVR の USB ポートの 1 つに接続します。
2. VGA または HDMI ケーブルを使用してモニターを NVR に接続します。
3. Connect the NVR to your network router or switch using an Ethernet cable.
4. Plug the power adapter into the NVR's power input and then into an electrical outlet.

Image: Rear panel of the NVR with various connection ports.

3. カメラの接続

Connect your IP cameras to the network for the NVR to detect them.

1. Ensure your network switch is connected to the internet.
2. Connect your IP cameras to the network switch using Ethernet cables.
3. Power on all connected cameras.
4. Power on the NVR. It will automatically search for and connect to compatible cameras on your network.

Image: Connection diagram for the NVR, switch, and cameras.

4. デバイスのアクティベーション

Upon first boot, you will need to activate the NVR.

1. Use the connected mouse to navigate the on-screen prompts.
2. Set a strong password for the NVR. The password should be 8 to 32 characters, including at least two types of characters (numbers, uppercase, lowercase, special characters).
3. Complete the unlock pattern settings as prompted.
4. Configure network settings (DHCP is usually enabled by default) and cloud settings.

Setup and Connection Video Guide

Video: A comprehensive guide demonstrating the unpacking, hard drive installation, physical connections, and initial activation process for the Tenda N3L-8H NVR.

操作手順

Learn how to use the core features of your Tenda NVR.

1.ライブ View

Once activated and connected, the NVR will automatically display a live preview from your connected cameras on the monitor.

2. Playback Recordings

に view 記録されたfootage, click the 'Playback' button on the NVR interface. You can select channels and navigate through the timeline to review イベント。

3. Remote Monitoring (TDSEE App)

The TDSEE App allows you to monitor your security system remotely from your mobile device.

1. Download and install the TDSEE App on your smartphone.
2. Scan the QR Code found on the Cloud Service page of your NVR's interface to bind the device to your app.
3. Once bound, you can preview monitoring videos, view playback recordings, and receive real-time alarm notifications directly on your phone.

画像: リモート viewing of camera feeds via the TDSEE mobile application.

メンテナンス

適切なメンテナンスを行うことで、NVR システムの寿命が長くなり、最適なパフォーマンスが確保されます。

1. Data Safety and Storage

The Tenda NVR N3L-8H includes features to protect your recorded data:

• Bad Sector Isolation: 知的な file storage system automatically detects, identifies, and skips bad sectors on your hard drive to prevent data corruption and loss.
• USB バックアップ: Utilize the USB backup feature to regularly save your video data to an external storage device.
• H.265+ビデオ圧縮: This advanced compression technology saves storage space while maintaining high video quality, allowing for more recordings on your HDD.

Image: Visual representation of HDD Bad Sector Isolation.

Image: H.265+ video compression efficiency with 10TB HDD support.

トラブルシューティング

If you encounter issues with your Tenda NVR, refer to the following common troubleshooting steps.

• カメラの互換性: The NVR supports Tenda IT7/IC7 Series Cameras and cameras from other brands that support the ONVIF protocol. Ensure your cameras meet these specifications. If using third-party cameras, verify ONVIF is enabled on the camera and check for specific compatibility notes.
• ファームウェアの更新： Ensure your NVR is running the latest firmware version. Check the official Tenda website for available updates for your specific hardware version. Firmware updates can resolve compatibility issues and improve performance.
• ネットワーク接続: Verify all Ethernet cables are securely connected. Ensure the NVR and cameras are on the same network segment and have valid IP addresses. Check your router settings if experiencing internet connectivity issues for remote viewing。
• Hard Drive Detection: If the hard drive is not detected or recording fails, ensure it is correctly installed and securely connected to the SATA interface. Power cycle the NVR after checking connections.
• Web Interface/App Access: If you cannot access the NVR via the web interface or TDSEE app, ensure the NVR has internet access (if required for remote features) and that the correct IP address or cloud ID is being used. Restarting the NVR and your network equipment can often resolve temporary connectivity glitches.

製品仕様

Detailed technical specifications for the Tenda NVR N3L-8H.

保証とサポート

具体的な保証内容は通常、製品のパッケージまたはメーカーの公式ウェブサイトに記載されています。 website. For technical support, product registration, or to inquire about warranty services, please visit the official Tenda support web公式サイトをご覧いただくか、カスタマーサービスまでお問い合わせください。サポートに関するお問い合わせの際は、購入時のレシートと製品のシリアル番号をご用意ください。