導入
Thank you for choosing the JOYROOM JR-ZS246 Dashboard Car Mount 15W Wireless Charger. This manual provides detailed instructions for the proper installation, operation, maintenance, and troubleshooting of your device. Please read this manual carefully before use to ensure optimal performance and safety.
セットアップ手順
1. 充電器の取り付け
The JOYROOM JR-ZS246 offers versatile mounting options for your vehicle's dashboard or windshield.
- 表面をきれいにする: Ensure the chosen mounting surface (dashboard or windshield) is clean, dry, and free of dust or grease.
- 吸盤を取り付けます: Place the suction cup firmly on the desired surface. Press down and then push the locking lever to secure the mount.
- アームを調整する: Loosen the adjustment knobs on the arm to position the charger at an optimal viewing angle. Tighten the knobs once the desired position is achieved.
この画像は詳細な view of the JOYROOM JR-ZS246 car charger, showcasing its adjustable arm for optimal positioning and the strong suction cup base designed for secure dashboard or windshield mounting.
2. 電源の接続
To enable the wireless charging function, connect the charger to your vehicle's power source.
- USB-Cケーブルを接続します: Insert the USB Type-C end of the provided charging cable into the port on the bottom of the car mount.
- 電源アダプターに接続します。 Plug the other end of the USB cable into a compatible car charger adapter (not included, recommended 15W or higher QC 3.0 adapter) in your vehicle's cigarette lighter socket.
- 電源オン: Once connected, the charger's LED indicator will illuminate, signifying it is ready for use.
操作手順
1. Placing Your Smartphone
The JOYROOM JR-ZS246 features an automatic clampメカニズム。
- Clを開くamps: clamps will automatically open when the charger detects a hand or phone approaching.
- 電話番号を挿入: Gently place your Qi-enabled smartphone into the holder. The clamps will automatically close and secure your phone.
- ワイヤレス充電: Once secured, wireless charging will begin automatically. The LED ring will indicate the charging status.
This image illustrates the JOYROOM JR-ZS246 wireless car charger in use, mounted on a vehicle's dashboard. It highlights the automatic locking feature when a phone is placed in the holder and the one-touch button for easy phone retrieval. The LED ring, which indicates charging status, is also visible.
2. Retrieving Your Smartphone
携帯電話を充電器から取り外すには:
- ワンタッチリリース： Touch the sensor button located on the side or bottom of the charger. The clamps will automatically open.
- 電話を削除: Carefully remove your smartphone from the holder. The clamps will close automatically after a few seconds.
3. Wireless Charging Technology
The JR-ZS246 features dual built-in coils for an optimized charging experience.
This diagram highlights the dual built-in coils within the JOYROOM JR-ZS246 wireless car charger. These coils provide a larger induction area, making wireless charging more efficient and reliable by reducing the need for precise phone placement.
The dual coil design ensures a larger induction area, allowing for easier phone placement and more consistent charging compared to single-coil chargers. This system automatically identifies the optimal charging location for your device.
This image demonstrates the advantage of the JOYROOM JR-ZS246's dual coil design. It shows how the dual coils automatically detect the phone's charging location for efficient power transfer, contrasting with a single coil system that may fail to recognize the charging position, leading to interrupted or no charging.
4. 充電互換性
The charger supports various fast charging wattages depending on your smartphone model.
This chart details the fast charging capabilities of the JOYROOM JR-ZS246 wireless car charger. It specifies 15W charging for Samsung, 10W for Huawei, and 7.5W for iPhone, along with examples of compatible phone models for each brand.
メンテナンス
適切なメンテナンスを行うことで、充電器の寿命が長くなり、最適なパフォーマンスが確保されます。
- クリーニング： Use a soft, dry cloth to wipe the surface of the charger. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the device.
- 水を避ける: Keep the charger away from water and excessive moisture. If it comes into contact with liquids, disconnect power immediately and allow it to dry completely before reuse.
- ストレージ： 長期間使用しない場合は、充電器を直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
- ケーブルのお手入れ: Do not bend or pull the charging cable excessively. Ensure the cable is not pinched or damaged.
トラブルシューティング
If you encounter issues with your JOYROOM JR-ZS246 charger, refer to the following common problems and solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Charger not powering on / LED off | No power connection; faulty cable or adapter. | Check if the USB-C cable is securely connected. Ensure the car charger adapter is working and properly inserted into the cigarette lighter. Try a different cable or adapter. |
| 携帯電話がワイヤレス充電されない | Phone not Qi-enabled; phone case too thick; improper phone placement; foreign object detected. | Ensure your phone supports Qi wireless charging. Remove thick phone cases. Reposition the phone to ensure it's centered on the charging coils. Remove any metal objects or cards between the phone and charger. |
| Clamps not opening/closing automatically | Sensor obstructed; power issue. | Ensure the infrared sensor (usually at the bottom of the holder) is clean and unobstructed. Check power connection. |
| Mount is unstable | Suction cup not properly secured; surface not clean. | Re-clean the mounting surface and re-attach the suction cup, ensuring the locking lever is fully engaged. Avoid mounting on textured or porous surfaces. |
仕様
- ブランド： ジョイルーム
- モデル： JR-ZS246
- 入力： 5V/2A, 9V/2A, 12V/1.5A (via USB Type-C)
- 出力: 5W / 7.5W / 10W / 15W (最大)
- 出力電流: 1.25 Ampere（最大）
- 出力巻tage: 12ボルト（DC）
- 充電基準： Qiワイヤレス充電
- 取り付けタイプ: Dashboard / Windshield Suction Cup
- 材料： ABS + PC (Plastic)
- 合計 USB ポート: 1 (Type-C for power input)
- 電源: Corded Electric (via car charger adapter)
保証情報
This JOYROOM JR-ZS246 Wireless Car Charger comes with a 1年間保証 from the date of purchase. The warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or natural disasters.
保証請求のために購入証明書を保管してください。
カスタマーサポート
For further assistance, technical support, or warranty inquiries, please contact JOYROOM customer service through the retailer where you purchased the product or visit the official JOYROOM web連絡先情報のサイト。
When contacting support, please provide your product model (JR-ZS246) and a detailed description of the issue.
