1. はじめに
The MOOER Steep I is a high-quality audio interface designed for musicians, producers, and home recording enthusiasts. It offers support for high-resolution audio up to 24-bit/192 kHz, ensuring clear and detailed sound capture. This manual provides essential information for setting up, operating, and maintaining your Steep I audio interface.
Image 1.1: MOOER Steep I Audio Interface in a typical recording environment.
2. 安全情報
デバイスを使用する前に、次の安全上の注意事項を読んで理解してください。
- ユニットを雨、湿気、または極端な温度にさらさないでください。
- ユニットを熱源の近くや直射日光の当たる場所に置かないでください。
- Use only the specified power supply or USB connection for power.
- ユニットを分解したり改造したりしないでください。修理は必ず資格のある専門家にご依頼ください。
- お子様の手の届かない場所に保管してください。
3. パッケージ内容
パッケージにすべてのアイテムが含まれていることを確認します。
- MOOER Steep I Audio Interface
- USB-C - USB-A ケーブル
- ユーザーマニュアル（このドキュメント）
4.製品オーバーview
Familiarize yourself with the various controls and connections on your Steep I audio interface.
4.1 フロントパネルコントロール
画像4.1: 上 view of the Steep I, highlighting control knobs and buttons.
- 入力ゲインノブ（1と2）: Adjust the input level for channels 1 and 2.
- 48Vボタン： Activates +48V phantom power for condenser microphones on input 2.
- S.DRCT (Direct Monitor) Button: Engages direct monitoring, allowing you to hear your input signal directly without latency.
- Main Out Knob: スタジオ モニターへの全体的な出力音量を制御します。
- ミックスノブ: Blends the direct input signal with the playback signal from your computer during direct monitoring.
- LED Input Level Indicators: Provide visual feedback on input signal levels for both channels.
- 電源LED: デバイスの電源状態を示します。
4.2 サイドパネルの接続
画像4.2: 側面 view of the Steep I, showing input and headphone connections.
- PHONES (Headphone Output): ヘッドフォンを接続するための 1/4 インチ TRS ステレオ ジャック。
- VOLUME (Headphone Volume): Rotary knob to adjust headphone output level.
- 1 INST/LINE: 1/4" TRS mono jack for connecting instruments (guitars, basses) or line-level devices.
- 2 MIC/LINE/INST: XLR/TRS combo jack for connecting microphones (XLR) or instruments/line-level devices (1/4" TRS).
4.3 リアパネルの接続
画像4.3：リア view of the Steep I, showing USB and main output connections.
- POWER (USB-C): Dedicated USB-C port for power supply.
- USB 2.0 (USB-C): USB-C port for data transfer to your computer. Can also supply power when connected to a PC.
- MAIN OUT (L & R): Two 1/4" TRS mono jacks for connecting to studio monitors or other playback systems.
5. セットアップ
5.1 システム要件
The MOOER Steep I is compatible with Windows 10 and above. It also works with Mac computers (Mini, Macbook Air) and various DAWs like ProTools, Logic Pro, and Garageband.
5.2 コンピュータへの接続
- Connect the provided USB-C to USB-A cable from the USB2.0 について port on the Steep I to an available USB port on your computer.
- If your computer cannot provide sufficient power, connect an external USB power adapter (not included) to the 力 USB-C port on the Steep I.
- The Power LED on the front panel will illuminate when the device is powered on.
5.3 ドライバのインストール
For Windows users, it is recommended to download and install the latest ASIO drivers from the official MOOER website for optimal performance and low latency. Mac users typically do not require additional driver installation as the device is class-compliant.
5.4 入力の接続
- Channel 1 (INST/LINE): Connect your guitar, bass, or other line-level instrument using a 1/4" TS/TRS cable.
- Channel 2 (MIC/LINE/INST): Connect a microphone using an XLR cable, or an instrument/line-level device using a 1/4" TS/TRS cable.
5.5 出力の接続
- 主な出力： スタジオモニターを MAIN OUT L そして R 1/4" TRS jacks using appropriate cables.
- ヘッドフォン: ヘッドフォンを 電話 1/4" TRS jack.
6. 操作
6.1 電源オン/オフ
The Steep I powers on automatically when connected to a computer via USB or when an external power supply is connected to the POWER port. There is no dedicated power switch.
6.2 入力ゲインの調整
回転する Input Gain Knobs (1 & 2) clockwise to increase the input level for your connected microphone or instrument. Observe the LED input level indicators to ensure your signal is strong but not clipping (peaking into the red).
6.3 48Vファンタム電源の有効化
If you are using a condenser microphone with the MIC/LINE/INST (Channel 2) input, press the 48V button to supply +48V phantom power. Ensure your microphone requires phantom power before activating this feature. Dynamic microphones do not require phantom power.
6.4 ダイレクトモニタリング
を押す S.DRCT button to enable direct monitoring. This allows you to hear your input signal directly through your headphones or main outputs with zero latency, which is crucial for recording. Use the ミックス knob to balance the direct input signal with the playback from your computer (e.g., backing tracks).
6.5 ヘッドホンモニタリング
Adjust the headphone listening level using the 音量 knob located next to the PHONES jack.
6.6 メイン出力レベル
Control the overall playback volume to your studio monitors using the メインアウト ノブ。
6.7 Software Integration (DAWs)
Once connected and drivers are installed (if necessary), select the MOOER Steep I as your audio input and output device within your Digital Audio Workstation (DAW) software (e.g., Ableton Live, FL Studio, Pro Tools, Logic Pro, Garageband). Refer to your DAW's manual for specific instructions on audio device selection.
ビデオ6.1: オーバーview of the MOOER Audio Interface, demonstrating its features and use cases.
Video 6.2: Official demonstration of the STEEP I & II Audio Interfaces, showcasing their capabilities.
7. メンテナンス
7.1 クリーニング
To clean the unit, use a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents. Ensure the unit is disconnected from power before cleaning.
7.2 ストレージ
When not in use for extended periods, store the Steep I in a cool, dry place away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case to prevent dust and damage.
8。 トラブルシューティング
If you encounter issues with your MOOER Steep I, refer to the following common problems and solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 入力から音が出ない | Incorrect gain setting, 48V not activated (for condenser mics), incorrect input selected in DAW, faulty cable. | Adjust input gain. Activate 48V if using a condenser mic. Verify input selection in your DAW. Check cables. |
| No sound from outputs (monitors/headphones) | Main Out/Headphone Volume too low, incorrect output selected in DAW, faulty cables, monitors/headphones not powered. | Increase Main Out/Headphone Volume. Verify output selection in your DAW. Check cables and ensure monitors/headphones are powered and connected correctly. |
| 歪んだ音声やノイズのある音声 | Input gain too high (clipping), driver issues, ground loop. | Reduce input gain until LED indicators do not peak into red. Reinstall drivers. Try connecting to a different USB port or power outlet. |
| デバイスがコンピューターに認識されない | Driver not installed (Windows), faulty USB cable, insufficient power, incorrect USB port. | Install/reinstall drivers. Try a different USB-C cable. Ensure sufficient power is supplied (use dedicated POWER port if needed). Try a different USB port on your computer. |
9. 仕様
| 特徴 | 仕様 |
|---|---|
| ブランド | ムーア |
| モデル | スティープⅠ |
| 接続技術 | USB-C |
| チャンネル数 | 2 |
| 最大Sampルレート | 24bit/ 192kHz |
| 対応デバイス | Microphone, Headphone, Personal Computer |
| サポートされているソフトウェア | Popular DAWs (e.g., Ableton Live, FL Studio, Pro Tools, Logic Pro, Garageband) |
| オペレーティング·システム | Windows 10以降、macOS |
| オーディオ入力 | XLR/TRS Combo (Channel 2), 1/4" TRS (Channel 1) |
| オーディオ出力 | 1/4" TRS Main Out (L/R), 1/4" TRS Headphone Out |
| アイテム重量 | 0.66キログラム |
10. 保証とサポート
10.1 保証情報
MOOER製品には、材料および製造上の欠陥に対する限定保証が付いています。製品に付属の保証書、またはMOOER公式ウェブサイトをご覧ください。 web詳細な保証条件については、サイトをご覧ください。
10.2 テクニカルサポート
For technical assistance, driver downloads, or further inquiries, please visit the official MOOER website or contact MOOER customer support through the contact information provided on their website. Ensure you have your product model (Steep I) and serial number ready when contacting support.