Veise KS02D Fingerprint Keyless Entry Door Lock Set Instruction Manual

導入

This manual provides detailed instructions for the installation, operation, and maintenance of your Veise KS02D Fingerprint Keyless Entry Door Lock Set. Please read this guide thoroughly before installation and use to ensure proper functionality and security.

含まれるもの

インストールを開始する前に、すべてのコンポーネントが揃っていることを確認してください。

• 指紋認証ドアロック
• ハンドルセット
• ハンドルレバー
• 説明書（このマニュアル）
• ユーザーマニュアル（このマニュアル）
• ラッチ
• ストライク
• 2つのバックアップキー
• 取り付けプレート
• ネジ

製品終了view

主な特徴:

• 複数のロック解除方法: Supports up to 20 fingerprints, 20 passwords, and 2 physical keys. One-time passwords can be generated for temporary access.
• 高速指紋認識: Built-in sensor with 99.99% recognition rate and 500 DPI resolution, unlocking in approximately 1 second.
• Auto-Lock & One-Touch Lock: Configurable auto-lock delay (10-99 seconds). Instant locking by pressing and holding any key for 2 seconds from the outside.
• 耐久性のある構造: Made from solid, premium zinc alloy, ANSI Grade 3 and BHMA tested, with IP54 water and dust resistance. Tested over 200,000 cycles.
• Anti-Peeping & Intrusion Protection: Decoy digits can be added before or after the actual code. The lock disables for 3 minutes after 10 incorrect entries.
• Long Battery Life & Alerts: Operates on 4 AA batteries (not included) for over a year. Features a low-battery alert on the backlit keypad.
• 休暇モード: Disables all user codes except the master password and triggers an alarm if opened from inside using the thumb turn.
• サイレントモード： Mutes keypad tones for quiet operation, while still allowing low-battery and security alerts to be audible.

Door Compatibility & Dimensions

Before installation, confirm your door dimensions and type:

• ドアの厚さ: 1-3/8インチ～2インチ（35mm～50mm）
• 穴径（メイン）: 2-1/8インチ（54mm）
• バックセット： 2-3/8インチまたは2-3/4インチ（60mmまたは70mm）
• 穴径（ラッ​​チ）： 3/8インチ（10mm）
• Minimalist Distance (between holes): 4" (101.6mm) - Cannot be installed if less than 4"
• ハンドルの長さ: 7-7/8" to 9-7/8" (200mm-225mm)

The lock is suitable for U.S. standard left and right-handed doors. Ensure your door has a chiseled latch hole and is a single cylinder type. It is not compatible with Mortise, Integrated, or Rim Cylinder lock types.

Image: Detailed diagram showing door lock dimensions, hole diameters, backset, and compatibility for left-handed and right-handed doors, including warnings for incompatible door types.

Image: Visual guide to check door size before purchase, illustrating hole diameter, backset, spacing between holes, and door thickness requirements.

画像: Examples of incompatible 3-hole spacing that will prevent installation, highlighting minimum distance requirements.

Image: Visual guide for checking latch hole type (chiseled vs. not chiseled) and door compatibility (single cylinder vs. mortise/integrated/rim cylinder).

設定

インストール:

The Veise KS02D lock set is designed for quick, tool-friendly installation. Only a screwdriver is typically required. Follow the detailed instructions provided in the included user manual for visual assistance.

バッテリーの取り付け:

The lock requires 4 AA batteries (not included). When installing batteries, ensure you press and hold the reset button before inserting the last battery. The lock mechanism will automatically adjust to the correct locking position.

Programming Fingerprints and Passcodes:

The lock supports up to 20 fingerprints and 20 passcodes. Refer to the "Quick Set Up" section in your physical manual for detailed programming steps. Generally, programming involves pressing the top button twice, entering the master code, pressing the top button again, and then following the prompts for adding fingerprints (scanning 8 times) or user codes.

Image: Illustrates the capacity for up to 20 fingerprints and codes, including one-time codes for various users like family, friends, pet sitters, and repairmen.

操作手順

ロック解除方法:

• 指紋： Place your registered fingerprint on the sensor. The lock will unlock in approximately 1 second.
• パスコード: Enter your programmed 4-8 digit passcode on the keypad.
• 物理キー: Use one of the two provided backup keys to manually unlock the deadbolt.
• ワンタイムコード: Generate temporary codes for guests or service providers. These codes expire after a single use.

Image: Close-up of the fingerprint sensor on the Veise KS02D lock, highlighting 0.3s biometric identification, 99.9% recognition rate, and 500 DPI resolution.

Image: Illustration of the one-time password feature, showing a person receiving a code via phone and another person using it to enter the home.

ロック方法:

• オートロック： The smart keypad can be set to automatically lock 10-99 seconds after the door closes.
• ワンタッチロック： From the outside, press and hold any key on the keypad for 2 seconds to instantly lock the door.

Image: Depicts the auto-lock feature with a timer (10-99s) and a person leaving the house, indicating the lock will automatically engage.

特別モード:

• 休暇モード: Disables all user codes except the master password. An alarm will trigger if the lock is opened from the inside using the thumb turn.
• サイレントモード： Mutes keypad tones for quiet operation, while still allowing low-battery and security alerts to be audible.

覗き見防止パスワード:

他人にコードを推測されないように、実際のパスコードの前または後にランダムな数字を入力することができます。ロックは、長い数字列内の正しいシーケンスを認識します。

メンテナンス

バッテリー交換:

The lock will provide a clear low-battery alert on the backlit keypad when the batteries are running low. Replace all 4 AA batteries promptly to ensure continuous operation. Always use fresh, high-quality alkaline batteries.

クリーニング：

キーパッドと指紋センサーは、柔らかく乾いた布で拭いてください。表面や電子部品を傷める可能性のある研磨剤入りの洗剤や溶剤の使用は避けてください。

トラブルシューティング

• ロックが応答しません: 電池残量を確認してください。残量が少ない場合は電池を交換してください。
• Incorrect Entry Limit: After 10 incorrect entries, the lock will shut down for 3 minutes to deter unauthorized access. Wait for the lockout period to end before trying again.
• 指紋が認識されません: 指が清潔で乾いていることを確認してください。問題が解決しない場合は、指紋の再登録をお試しください。
• 自動ロックが作動しない: Verify that the auto-lock feature is enabled and the delay time is set correctly in the programming settings.
• ドアハンドルの問題: If the door handle does not operate smoothly, check for proper alignment and installation. The adjustable design of the handle should accommodate most standard door setups.

仕様

保証とサポート

Veise offers a 2-year full-unit warranty and lifetime maintenance for mechanical components. For assistance, please contact Veise customer support:

• 電話サポート: Available Monday-Friday 9 AM-5 PM PST, and Saturday 7 AM-3 PM PST.
• サービス問合せメール： 24/7 email support from the Veise professional team.

Image: Graphic detailing US-based support hours and contact information for Veise products.