SeeYing Belt-Drive Bluetooth Vinyl Turntable User Manual

1.製品オーバーview

The SeeYing Belt-Drive Bluetooth Vinyl Turntable offers a blend of classic vinyl playback with modern connectivity. Featuring a belt-drive system, adjustable counterweight, and a high-quality magnetic cartridge, it delivers precise audio reproduction. Its integrated Phono preamplifier allows for direct connection to various audio systems, while Bluetooth output enables wireless streaming to compatible speakers or headphones. Additionally, the USB port facilitates digitizing your vinyl collection to MP3 files.

図1.1: 前面 view of the SeeYing Turntable with dust cover open and a record on the platter.

2. パッケージ内容

以下の項目のボックスにチェックを入れてください。

• SeeYing Turntable Unit
• 電源アダプター/充電器
• ユーザーマニュアル
• ダストカバー
• スリップマット
• カウンターウェイト
• Anti-skate Weight (pre-installed or separate)

3. コンポーネントとコントロール

3.1 ターンテーブル部品

図 3.1: 拡大図 views of key turntable components.

• プラッター: The aluminum die-cast platter provides stable rotation for records.
• Belt-Drive System: Located beneath the platter, this system ensures smooth and consistent rotation.
• トーンアーム: Holds the cartridge and stylus, allowing it to track the record grooves.
• カウンターウェイト： Adjustable weight on the tonearm for proper tracking force.
• スタイラス/カートリッジ: The Audio-Technica AT3600L diamond-tipped stylus precisely reads the record's grooves. It is detachable for replacement.
• ダストカバー: 使用していないときにターンテーブルをほこりから保護します。

3.2 リアパネルの接続

Figure 3.2: Rear panel connections and their functions.

1. アースコネクタ: For connecting a ground wire to an amplifier if needed to reduce hum.
2. Phono/Line-Out Jacks (R/L): RCA出力に接続するための ampスピーカーまたはパワードスピーカー。
3. Phono/Line-Out Switch: Selects between Phono (for amplifiers with a dedicated phono input) and Line (for standard audio inputs, utilizing the turntable's built-in preamplifier）。
4. USB-PC Port: Connects the turntable to a computer for digitizing vinyl records.
5. DC In 12V: 付属の電源アダプターの電源入力。
6. Wireless Output Connectivity (Bluetooth): Activates the Bluetooth transmitter for wireless audio streaming.

3.3 トップパネルのコントロール

Figure 3.3: Speed and Start/Stop control buttons.

• 33 & 45 Speed Button: Selects the playback speed (33 1/3 RPM or 45 RPM) to match your vinyl record.
• Start & Stop Button: Initiates or halts the platter rotation.

4. セットアップ

Follow these steps for initial setup of your SeeYing Turntable:

Figure 4.1: Visual guide for turntable assembly.

1. Install the Aluminum Platter: Carefully place the aluminum die-cast platter onto the central polished stainless steel spindle.
2. Install the Drive Belt: Locate the red ribbon attached to the drive belt. Gently pull both ends of the red ribbon to stretch the belt around the motor pulley (small brass cylinder) and then around the inner rim of the platter. Remove the red ribbon once the belt is correctly positioned.
3. Place the Slipmat: Lay the felt slipmat on top of the platter.
4. Adjust the Counterweight: Slide the counterweight onto the rear of the tonearm. Rotate it carefully until the tonearm is balanced and floats horizontally. Then, adjust the tracking force according to your cartridge's specifications (typically 2.5-3.5 grams for the AT3600L stylus). The numbers on the counterweight indicate the tracking force.
5. ダストカバーを取り付けます。 Insert the hinges of the dust cover into the slots at the rear of the turntable base.
6. 接続電源： Plug the DC 12V power adapter into the DC In port on the rear of the turntable and then into a wall outlet.

5. 操作手順

5.1 電源のオン/オフ

To power on the turntable, flip the ON/OFF switch located on the rear panel to the 'ON' position. To power off, flip the switch to 'OFF'.

5.2 レコードの再生

1. ビニールレコードをプラッターの上に置きます。
2. Select the correct speed (33 or 45 RPM) using the '33 & 45 Speed Button' on the top panel.
3. Press the 'Start & Stop Button' to begin platter rotation.
4. キューイングレバーを使用してトーンアームをゆっくりと持ち上げます。
5. トーンアームをレコードの希望する開始溝の上に配置します。
6. キューイングレバーをゆっくり下げて、スタイラスをレコードの上に下ろします。
7. To stop playback, lift the tonearm, return it to the tonearm rest, and press the 'Start & Stop Button'.

5.3 Bluetooth接続

The turntable can transmit audio wirelessly to Bluetooth-enabled speakers or headphones.

Figure 5.1: Turntable demonstrating wireless output connectivity.

1. Bluetooth スピーカーまたはヘッドフォンがペアリング モードになっていることを確認します。
2. Turn on the turntable. The Bluetooth function will automatically attempt to pair with the nearest available Bluetooth audio device.
3. Once connected, audio from the turntable will be streamed to your Bluetooth device.

Note: Some Bluetooth speakers, particularly large soundbars, may not connect properly due to protocol differences. This turntable is compatible with BT protocols HFPV1.5, A2DPV1.2, AVRCPV1.4, HSP1.2, GAVDP1.2, IOP.

5.4 Wired Connection (RCA Output)

Connect the turntable to an external ampRCA ケーブルを使用して、アンプまたはパワードスピーカーに接続します。

Figure 5.2: Turntable connected to external speakers via RCA.

1. Connect RCA cables (red to red, white to white) from the 'Phono/Line-Out Jacks' on the turntable to the corresponding input on your ampスピーカーまたはパワードスピーカー。
2. Set the 'Phono/Line-Out Switch' on the turntable's rear panel:
• 選択 'PHONO' あなたの amplifier has a dedicated phono input.
• 選択 'LINE' あなたの amplifier or speakers use a standard auxiliary input (the turntable's built-in preamplifier will be active).
3. If experiencing hum, connect a ground wire from the turntable's 'Ground Connector' to the ground terminal on your amplifier。

5.5 USB 録音

Digitize your vinyl collection by connecting the turntable to your computer via USB.

Figure 5.3: USB connection for vinyl recording.

1. Connect a USB cable from the 'USB-PC Port' on the turntable to an available USB port on your computer.
2. Install appropriate audio recording software on your computer (e.g., Audacity, not included).
3. Follow the software's instructions to select the turntable as the audio input device and begin recording your vinyl audio into MP3 or other digital formats.

6. メンテナンス

6.1 スタイラスのクリーニング

A clean stylus ensures optimal sound quality and prolongs record life. Use a soft brush designed for stylus cleaning, brushing gently from back to front (away from the cantilever).

6.2 ユニットのクリーニング

Wipe the turntable's surface with a soft, dry, lint-free cloth. For stubborn marks, a slightly damp 布で拭いた後、乾いた布で拭いてください。研磨剤入りの洗剤や溶剤は使用しないでください。

6.3 ダストカバーのお手入れ

ダストカバーを柔らかくて乾いた布で拭いてください。amp cloth. Avoid using harsh chemicals or abrasive materials that could scratch the acrylic surface.

6.4 スタイラスの交換

The stylus has a limited lifespan and should be replaced periodically (typically after 300-500 hours of playback). Refer to the stylus manufacturer's instructions for replacement. The AT3600L stylus is detachable for easy replacement.

Figure 6.1: Detachable high-end stylus.

7。 トラブルシューティング

8. 仕様

9. 保証とサポート

SeeYing is committed to providing high-quality products and excellent customer service. While specific warranty details are not provided in this manual, SeeYing offers dedicated after-sales support for all customers.

For any questions, technical assistance, or support inquiries regarding your SeeYing turntable, please contact the seller or SeeYing customer service directly through the platform where you purchased the product. Please have your model number (HP-H0056) and purchase details ready when contacting support.