1.製品オーバーview
The MX CS-4 L is a 4-inch ceiling speaker designed for seamless integration into various environments, providing both audio output and ambient LED lighting. This speaker features a durable ABS frame and a high-compliance polymer cone for clear sound reproduction. It is suitable for a wide range of applications including homes, offices, and public address systems.
主な特徴:
- Excellent Frequency Response.
- Premium flush mount design with stylish grill.
- Lightweight and stiff polymer cones for damping and bass response.
- Integrated 5 Watt White LED Bulb.
- Bluetooth connectivity for wireless control.
2. 安全情報
設置および操作の前に、すべての安全に関する指示をよくお読みください。指示に従わないと、感電、火災、その他の危険が発生する可能性があります。
- 電気安全: Ensure power is disconnected at the main circuit breaker before performing any installation or wiring. All wiring should be performed by a qualified electrician in accordance with local electrical codes.
- 設置場所： Install speakers in a location that can structurally support their weight. Avoid installing near heat sources, in direct sunlight, or in areas with excessive moisture.
- 換気： Ensure adequate ventilation around the speaker to prevent overheating.
- 取り扱い： Handle the speaker carefully to avoid damage to the cone or housing.
3. パッケージ内容
パッケージにすべてのコンポーネントが含まれていることを確認します。
- MX CS-4 L Ceiling Speaker with LED Light (Quantity as per pack)
- Installation Cut-out Template
4. セットアップとインストール
Follow these steps for proper installation of your MX CS-4 L ceiling speaker.
4.1インストール前
- Determine the optimal location for your speaker, ensuring no obstructions (e.g., joists, electrical wires, plumbing) are present in the ceiling cavity.
- Ensure the ceiling material is suitable for mounting and can support the speaker's weight.
- メイン回路ブレーカーで設置エリアの電源をオフにします。
4.2 Creating the Ceiling Cut-out
- Use the provided cut-out template to mark the desired opening on the ceiling.
- 適切なツール（例：乾式壁用鋸）を使用して開口部を慎重に切り取ります。
4.3配線接続
The speaker requires connections for both audio and the integrated LED light. Refer to the back of the speaker for connection terminals.
画像1: 後方 view of the MX CS-4 L ceiling speaker, illustrating the audio input terminals and the AC power connection for the LED light.
- オーディオ接続： 接続する amplifier, audio receiver, or public address system to the speaker's audio input terminals. Ensure correct polarity (+ to + and - to -) for optimal sound.
- LED Power Connection: Connect the AC 220V, 50Hz power supply to the dedicated LED power terminals on the speaker.
4.4 スピーカーの取り付け
画像2: フロント view of the MX CS-4 L ceiling speaker with the grill removed, highlighting the integrated LED light ring and the spring-loaded mounting clips.
- Carefully insert the speaker into the cut-out opening.
- The integrated screw-loaded clamps (or spring-loaded clips) will secure the speaker flush against the ceiling. Tighten screws if applicable, or ensure clips are fully engaged.
- Attach the speaker grill by aligning it with the speaker frame and gently pushing until it snaps into place.
画像3: フロント view of the MX CS-4 L ceiling speaker with the protective grill installed, showing its flush-mount design.
5. 操作
5.1 オーディオ再生
Once connected to an audio source (amplifier, receiver, mixer), turn on your audio equipment and the speaker. Adjust the volume from your audio source. The speaker is designed to deliver clear and balanced sound for both speech and music.
5.2 LEDライト制御
The integrated LED light can be controlled via an app or Bluetooth. Refer to the specific instructions for the control app or Bluetooth pairing process to manage the light's on/off state.
6. メンテナンス
Regular maintenance ensures optimal performance and longevity of your speaker.
- クリーニング： Use a soft, dry cloth to wipe the speaker grill and frame. Do not use harsh chemicals, solvents, or abrasive cleaners.
- ほこりの除去: Periodically remove dust from the speaker surface to prevent accumulation that could affect sound quality or LED light output.
- 検査： 目に見える損傷や接続の緩みがないか、スピーカーを定期的に点検してください。
7。 トラブルシューティング
If you encounter issues with your MX CS-4 L speaker, refer to the following troubleshooting guide:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| スピーカーから音が出ない |
|
|
| LEDライトが機能しない |
|
|
| 音質が悪い |
|
|
8. 仕様
Detailed technical specifications for the MX CS-4 L Ceiling Speaker with LED Light:
| 特徴 | 仕様 |
|---|---|
| モデル名 | MX CS-4 L |
| 取り付けタイプ | 天井マウント |
| スピーカータイプ | 成分 |
| スピーカーサイズ | 4インチ |
| 材料 | ABS、アクリロニトリルブタジエンスチレン |
| 特集 | LED Light (White LED Bulb 5 Watt) |
| インピーダンス | 8オーム |
| Sensitivity (db) | 90デシベル |
| スピーカー最大出力 | 25ワット |
| 周波数応答 | 50Hz |
| 接続技術 | ブルートゥース |
| 制御方法 | アプリ |
| 対応デバイス | Amplifier, Audio Receiver, Mixer, Public Address System |
| 電源 | DC (for speaker), AC 220V (for LED) |
| アイテム重量 | 3700グラム（約3.7kg） |
| 原産国 | インド |
9. 保証情報
This MX product is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary. Please retain your purchase receipt as proof of purchase for any warranty claims.
For details regarding extended warranty options, please refer to the information provided at the time of purchase or contact customer support.
10. カスタマーサポート
For technical assistance, troubleshooting, or warranty inquiries, please contact MX customer support:
- メーカー: MX-MDRテクノロジーズ株式会社
- 住所： プロット 101 セクター 1 ガウライパーダ バサイ (東) パルガー - 401208 ムンバイ インド
- メールアドレス: info@mdrelectronics.com / dipesh@mdrelectronics.com
- 連絡先番号。： 9552529345 / 8805029016
- Webサイト： www.mdrelectronics.com