製品終了view
This manual provides instructions for the SanJie Wireless Doorbell Kit, designed for home use, including features beneficial for the hearing impaired. The kit includes one push button and two portable receivers, offering multiple alert modes, adjustable volume, and a wide operating range.
Image: The SanJie Wireless Doorbell Kit, showing one push button and two receivers.
製品の特徴
- Upgraded Ringtones: Features 20 selectable ringtones.
- 低バッテリリマインダー： Informs you about the doorbell's power status.
- Battery Operated & Portable: Receivers use 3 AAA batteries (included) and have a back clip for portability.
- Hearing Impaired Support: Includes colorful flashing LED lights and a vibration function for visual and tactile alerts.
- 複数の作業モード: Offers 4 modes (Ringtone+Vibration, Ringtone+Flash, Ringtone+Vibration+Flash, Ringtone only).
- 調節可能な音量: 5 levels of volume adjustment from 0-110dB, including a mute mode.
- 拡張範囲: Up to 1000 ft (300m) wireless receiving range. Additional receivers can extend coverage.
- 簡単なインストール: Push button can be installed with double-sided tape or screws.
- Durable Push Button: IP55 waterproof rating, suitable for temperatures from -4°F to 140°F, with low power consumption for long lifespan.
セットアップ手順
1. Powering the Receivers
Each receiver requires 3 AAA batteries. Open the battery compartment on the back of each receiver and insert the batteries, ensuring correct polarity. The receivers are pre-paired from the factory.
画像: 背面 view of the receiver showing the battery compartment for 3 AAA batteries.
2. プッシュボタンの取り付け
The push button can be installed using either the provided double-sided adhesive tape or screws. Choose a suitable location near your door. Ensure the surface is clean and dry before applying adhesive.
Image: A white wireless doorbell push button mounted on a wall next to a door.
The push button is IP55 waterproof and designed to withstand various weather conditions, operating effectively between -4°F and 140°F.
3. Pairing Additional Transmitters (if needed)
If you need to pair additional push buttons or re-pair existing ones, follow these steps:
- On the receiver, press the music button to select your desired ringtone.
- Press and hold the volume button on the receiver until the LED light flashes and emits a "ding" sound to enter pairing mode.
- Press the push button to send a signal. The receiver will make a "ding-ding" sound and flash, indicating successful pairing.
- Press the push button again to confirm the receiver sounds.
Image: Step-by-step visual guide for pairing the doorbell push button with the receiver.
操作手順
1. Turning On/Off the Receiver
Press the large central button on the receiver to turn it on or off.
Video: Demonstrates how to turn the receiver on and off by pressing the central button.
2. 作業モードの変更
The receiver has a side button to cycle through 4 alert modes:
- モードA： Ringtone + Vibration
- モードB： Ringtone + Flash
- モードC： Ringtone + Vibration + Flash
- モードD： Ringtone only
Video: Shows how to cycle through the 4 alert modes (Ringtone+Vibration, Ringtone+Flash, Ringtone+Vibration+Flash, Ringtone only) using the side button.
3.音量の調整
Use the volume buttons on the side of the receiver to adjust the sound level. There are 5 volume levels, ranging from 0dB (mute) to 110dB.
Video: Demonstrates adjusting the volume levels on the receiver.
4. 着信音の変更
Press the music button on the receiver to cycle through the 20 available ringtones. You can set different ringtones for different push buttons if you have multiple transmitters.
Video: Illustrates how to change the ringtone on the receiver.
メンテナンス
1. バッテリーの交換
The receivers are powered by 3 AAA batteries. When the low battery reminder activates, replace the batteries promptly to ensure continuous operation. The push button uses a 12V 23A battery with an estimated 3-year lifespan.
Image: Diagram indicating the 3-year battery lifespan for the push button.
2. 清掃
ドアベルユニットは柔らかく乾いた布で拭いてください。研磨剤入りの洗剤や溶剤の使用は避けてください。
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Receiver does not ring/flash. | Low or dead batteries in receiver or push button. Receiver is off. Out of range. Not paired correctly. | Replace batteries in both units. Ensure receiver is turned on. Move receiver closer to the push button. Re-pair the units following the setup instructions. |
| Short receiving range. | Obstructions (thick walls, metal structures). Interference from other wireless devices. | Relocate receiver or push button to minimize obstructions. Avoid placing near large metal objects or other strong wireless signals. Consider adding more SanJie receivers to extend coverage. |
| Ringtone changes unexpectedly. | Accidental press of the music button. | Press the music button again to select your preferred ringtone. |
仕様
- メーカー: サンジエ
- モデル番号: 1Button+2Receiver US
- 商品の重量: 11.3オンス
- 製品寸法: 3.54 x 2.56 x 0.98インチ
- 受信機用電池: 単3電池XNUMX本（付属）
- プッシュボタン電池： 1* 12V 23A battery (included)
- 色： 白
- 材料： アブソリュート
- インストール方法: 粘着式
- 防水等級（プッシュボタン）: IP55
- Operating Temperature (Push Button): -4°F ～ 140°F
- 無線範囲: 最大1000フィート/ 300m
- 着メロ： 20つのオプション
- 音量レベル: 5（0～110dB）
- アラートモード： Ringtone+Vibration, Ringtone+Flash, Ringtone+Vibration+Flash, Ringtone
保証とサポート
SanJie offers a 100% guarantee and service. If you have any questions or issues regarding the product, please contact us anytime via Amazon mail for a satisfactory solution.
For additional support or to explore other SanJie products, visit the official SanJie Store on Amazon: SanJie Store.