Lanzar 4-Band Parametric Equalizer with Subwoofer (Model VBE420P) Instruction Manual

製品終了view

The Lanzar VBE420P is a 4-band parametric equalizer designed to enhance your audio system with precise sound control. Featuring a 9 Volt RMS pre-amp output and selectable dual input sources (RCA and auxiliary), this unit allows for detailed adjustment of bass, mid-bass, mid, and high frequencies. It includes dedicated subwoofer gain control and a fader for front/rear speaker balance, ensuring a customized and immersive listening experience. Its compact half-DIN size makes it suitable for various installations.

箱の中身

Image: The Lanzar VBE420P 4-Band Parametric Equalizer shown with its packaging and included accessories.

• Lanzar VBE420P 4-Band Parametric Equalizer with Subwoofer
• 2取り付けブラケット
• プラスネジ8本
• 1A ヒューズ付きの赤い電源ケーブル
• 事前amp Line Aux Inputs via RCA & Phone Jacks

セットアップとインストール

取り付け

The VBE420P features a half-DIN size, allowing for flexible installation in various vehicle dashboards or custom locations. Use the provided mounting brackets and screws to secure the unit. Ensure the mounting location allows for proper ventilation and access to controls.

Image: The Lanzar VBE420P Equalizer seamlessly integrated into a car's dashboard, demonstrating its compact size and potential for discreet installation.

配線接続

画像: 詳細な view of the rear panel of the Lanzar VBE420P, highlighting the RCA input and output jacks for various audio components.

1. 電源接続: Connect the red power wire (with 1A fuse) to a switched 12V power source. Connect the black ground wire to a clean chassis ground. Connect the remote turn-on wire to your head unit's remote output.
2. 入力ソース： The unit supports two input sources. Use the RCA input jacks for your main audio source (e.g., head unit). An auxiliary input is also available for connecting portable devices like MP3 players or phones.
3. 出力接続： Connect the RCA outputs (Front, Rear, Subwoofer) to your power amplifiers. The subwoofer output provides a 9 Volt RMS pre-amp signal for powerful bass.

Operating the Equalizer

Image: The front control panel of the Lanzar VBE420P, illustrating the various knobs and switches for adjusting audio settings.

フロントパネルコントロール

• 音量コントロール: Adjusts the overall output volume of the equalizer.
• Fader (Front/Rear): Balances the audio output between the front and rear speakers.
• Subwoofer Gain Control: サブウーファー チャンネルの出力レベルを調整します。
• サブウーファー周波数制御: Allows adjustment of the subwoofer crossover frequency between 60Hz and 90Hz.
• イコライザーバンド: Seven adjustable bands (50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6KHz, 16KHz) allow for precise tuning of specific frequency ranges. Each band can be adjusted from -12dB to +12dB.
• 入力セレクタースイッチ: Toggles between the main RCA input and the auxiliary input.
• イルミネーションセレクタースイッチ: Controls the blue light illumination of the unit.

メンテナンス

To ensure long-lasting performance of your Lanzar VBE420P equalizer, follow these simple maintenance guidelines:

• クリーニング： Use a soft, dry cloth to wipe the exterior of the unit. Avoid abrasive cleaners or solvents that could damage the finish.
• 環境： Keep the equalizer away from excessive heat, moisture, and direct sunlight. Ensure adequate ventilation around the unit.
• 接続: すべての配線接続が安全で腐食がないことを定期的に確認してください。

トラブルシューティング

If you encounter issues with your Lanzar VBE420P, refer to the following common problems and solutions:

• 電源なし: Check the power, ground, and remote turn-on connections. Ensure the 1A fuse is intact.
• 音が出ない: Verify all RCA input and output connections. Check the input selector switch to ensure the correct source is selected. Confirm that connected ampライフファイアは電源が入っており、機能しています。
• ねじれ： Reduce the input level from your head unit or the equalizer's volume control. Ensure all equalizer bands are not set to extreme boost levels. Check for proper grounding.
• 音の不均一性（左/右）: Adjust the fader control to balance the sound between front and rear speakers. Check individual channel RCA connections.

仕様

Image: The Lanzar VBE420P Equalizer displaying its physical dimensions: 7 inches (length), 4.1 inches (width), and 1.10 inches (height).

保証情報

Lanzar products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Lanzar webサイトでご確認ください。保証請求に備えて購入証明書を保管してください。

カスタマーサポート

Should you require further assistance or have questions not covered in this manual, please contact Lanzar customer support. Contact information can typically be found on the product packaging or the official Lanzar website. Please have your model number (VBE420P) and purchase details ready when contacting support.