GLEDOPTO WiFi RGBCCT LED Strip Controller (Model GL-C-008W) User Manual

1. はじめに

This manual provides comprehensive instructions for the GLEDOPTO WiFi RGBCCT LED Strip Controller, Model GL-C-008W. It covers product features, installation, operation, and technical specifications. Please read this manual carefully before using the device to ensure proper functionality and safety.

Image 1.1: GLEDOPTO WiFi RGBCCT LED Strip Controller (Model GL-C-008W).

2 製品の特徴

• 2.4GHz WiFi Protocol: Direct control via 2.4GHz WiFi, eliminating the need for a separate Zigbee hub.
• RGBCCT Compatibility: Suitable for RGBCCT and RGBWW LED strip lights, allowing adjustment of color, color temperature, and brightness.
• Tuya Smart Life App Control: Full control through the Tuya Smart Life application, offering multiple functions.
• 音声コントロール: Compatible with third-party voice assistants such as Amazon Alexa and Google Home.
• ワイドVoltage範囲： Supports DC12-54V, suitable for various light strips and LEDs.

画像2.1: 以上view of GLEDOPTO WiFi RGBCCT LED Strip Controller product features and specifications.

3. セットアップとインストール

Follow these steps to set up your GLEDOPTO WiFi RGBCCT LED Strip Controller:

1. 光源に電力を供給する: Connect the LED strip light to the controller, and then connect the controller to a suitable power adapter (DC12-54V). Ensure all connections are secure.
2. Set Up Your WiFi: Ensure your 2.4GHz WiFi network is active and accessible.
3. Tuyaアプリをダウンロードしてください: Download and install the "Tuya Smart Life" app from your device's app store. Register or log in to your account.
4. Complete Setup and Control: Open the Tuya Smart Life app and follow the in-app instructions to add your new device. The app will guide you through the pairing process. If the device is not found, try powering the controller off and on, or perform a reset.

Image 3.1: Visual guide for the four-step setup process, including wiring, WiFi, app download, and control.

3.1. 配線接続

The controller supports two main power input methods and various output connections for LED strips.

• 電源入力:
  • 5.5x2.1mm DCソケット: For standard DC power adapters.
  • V+、V-電源インターフェース: For direct wire connections from a power supply.
• LEDストリップ出力: Connections for R (Red), G (Green), B (Blue), C (Cool White), W (Warm White), and V+ (Common Anode).

画像3.2: 詳細 view of the power input options on the GLEDOPTO controller.

Image 3.3: The GLEDOPTO controller showing wire preparation and connection terminals.

3.2.接続タイプ

The controller supports various connection configurations. It is recommended that a single controller connects to a light strip no more than 10 meters in length for optimal performance.

Image 3.4: Diagram illustrating three common connection types for LED strips with the WiFi controller, including power driver/transformer and recommended strip lengths.

4. 操作

Once the controller is successfully set up and paired with the Tuya Smart Life app, you can control your LED strip lights using the app or voice commands.

4.1.アプリ制御

The Tuya Smart Life app provides comprehensive control over your LED strip lights:

• 色調整： Select from 16 million colors to create your desired ambiance.
• 色温度調節: 白色光を暖色から寒色まで調整​​します。
• 明るさ調整: お好みのレベルに合わせて照明を暗くしたり明るくしたりできます。
• シーンモード: Utilize pre-set or custom scene modes for different occasions.

4.2. 音声コントロール

Integrate your GLEDOPTO controller with Amazon Alexa or Google Home for hands-free control. Once linked, you can use voice commands such as:

• 「アレクサ、電気をつけて。」
• "Hey Google, set the living room to cool white."
• "Alexa, increase brightness to 70%."

5. メンテナンス

The GLEDOPTO WiFi RGBCCT LED Strip Controller requires minimal maintenance. To ensure longevity and optimal performance:

• デバイスを清潔に保ち、ほこりを取り除いてください。清掃には乾いた柔らかい布を使用してください。
• コントローラーを湿気や極端な温度にさらさないでください。
• 保証が無効になるため、デバイスを自分で開けたり修理したりしないでください。

6。 トラブルシューティング

If you encounter issues with your GLEDOPTO WiFi RGBCCT LED Strip Controller, consider the following common solutions:

• デバイスがWiFiに接続できない:
  • Ensure your WiFi network is 2.4GHz. The controller does not support 5GHz networks.
  • Check that the controller is within range of your WiFi router.
  • Restart the controller by unplugging and re-plugging the power.
  • WiFiルーターを再起動します。
  • Attempt to re-pair the device through the Tuya Smart Life app.
• LED Strip Not Responding:
  • Verify all wiring connections between the power supply, controller, and LED strip are secure and correct.
  • Check if the power supply is functioning correctly and providing the appropriate voltage（DC12-54V）。
  • Ensure the LED strip itself is not faulty.
• 音声制御の問題:
  • Confirm that the controller is successfully linked to your Amazon Alexa or Google Home account via the Tuya Smart Life app.
  • インターネット接続を確認してください。
  • Ensure your voice commands are clear and match the device names configured in the app.

問題が解決しない場合は、サポート セクションを参照してさらに支援を受けてください。

7. 仕様

8. 保証情報

Specific warranty details for the GLEDOPTO WiFi RGBCCT LED Strip Controller are typically provided with the product packaging or on the manufacturer's official web当サイトをご覧ください。最も正確かつ最新の保証条件については、これらの情報源をご参照ください。

9. カスタマーサポート

For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact GLEDOPTO customer support through their official website or the contact information provided in your product packaging. When contacting support, please have your product model number (GL-C-008W) and purchase details ready.