1. はじめに
ご購入ありがとうございますasing the Alecto ADB20 Wireless Doorbell. This manual provides essential information for the safe and efficient use of your new doorbell system. Please read these instructions carefully before installation and retain them for future reference.
The Alecto ADB20 is a wireless doorbell system designed for ease of installation and reliable performance. It features an IP56 waterproof outdoor transmitter and a portable indoor receiver, offering a range of up to 200 meters in open areas and 50 meters indoors. With 52 selectable melodies and 5 adjustable volume levels, you can customize your doorbell experience. The system is also expandable, allowing connection of up to 6 additional receivers.
2. パッケージ内容
すべての品物が揃っていて良好な状態であることを確認してください。
- 1 x Wireless Doorbell Transmitter (Outdoor Unit)
- 1 x Wireless Doorbell Receiver (Indoor Unit)
- 1 x A23 (12V) Battery for Transmitter
- 1×両面粘着テープ
- 取り付けネジと壁プラグ
- User Manual (English and other languages)
3. 安全に関する注意事項
- Do not expose the receiver to rain or moisture. The transmitter is IP56 waterproof, suitable for outdoor use, but avoid submerging it in water.
- ご自身でユニットを開けたり修理したりしないでください。すべての修理は資格のある専門家にご依頼ください。
- Use only the specified battery type (A23 12V) for the transmitter. Ensure correct polarity when inserting batteries.
- 使用済みバッテリーは地域の規制に従って責任を持って廃棄してください。
- 電池はお子様の手の届かないところに保管してください。 飲み込んだ場合は、直ちに医師の診察を受けてください。
- Avoid placing the receiver near strong electromagnetic fields, which may interfere with its operation.
4. セットアップとインストール
4.1 Installing the Transmitter (Outdoor Unit)
- 電池を挿入します: Open the back cover of the transmitter. Insert the supplied A23 (12V) battery, ensuring the correct positive (+) and negative (-) polarity. Close the cover securely.
- 場所を選択してください： Select a suitable location near your front door. Ensure the surface is clean and dry. The transmitter is IP56 waterproof, making it suitable for outdoor installation.
- 取り付け: 取り付けには XNUMX つのオプションがあります。
- 粘着テープ: Peel off one side of the double-sided adhesive tape and stick it to the back of the transmitter. Peel off the other side and firmly press the transmitter onto the desired surface for at least 30 seconds.
- ネジ: Use the provided screws and wall plugs to securely attach the transmitter to the wall. Mark the drill points, drill holes, insert wall plugs, and then screw the transmitter into place.
Image: The Alecto ADB20 wireless doorbell transmitter unit, showing the large central button.
4.2 Setting Up the Receiver (Indoor Unit)
- 電源オン: The receiver is battery operated. Insert the required batteries (type not specified in product details, typically AA or AAA, please check the unit's battery compartment for specific type and quantity).
- 配置: Place the receiver in a convenient location within your home where you can easily hear the doorbell. Consider the maximum indoor range of 50 meters (up to 200 meters in open areas) when choosing a spot.
- ペアリング（必要な場合）: The units are usually pre-paired from the factory. If they do not connect automatically, refer to the troubleshooting section or the full manual for pairing instructions. The ADB20 uses an encrypted signal to prevent interference.
Image: The Alecto ADB20 wireless doorbell receiver unit, showing the speaker grille and controls.
画像: 背面 view of the Alecto ADB20 receiver, showing the battery compartment and mounting options.
5. 操作手順
5.1 メロディーの変更
The Alecto ADB20 offers 52 different melodies. To change the melody:
- Locate the melody selection button on the side of the receiver unit.
- Press the button repeatedly to cycle through the available melodies. Each press will play the next melody.
- Once you hear a melody you like, stop pressing the button. The selected melody will be saved and used for future doorbell rings.
5.2 音量の調整
The receiver has 5 adjustable volume levels, ranging from 0 dB (mute) to 110 dB (maximum volume). To adjust the volume:
- Locate the volume control button on the side of the receiver unit.
- Press the button repeatedly to cycle through the 5 volume levels. Each press will adjust the volume up or down.
- 希望の音量レベルを選択します。
5.3 システムの拡張
The Alecto ADB20 system is expandable. You can add up to 6 additional receivers to your existing doorbell transmitter. This is useful for larger homes or multi-story buildings to ensure the doorbell can be heard in various locations.
To add an additional receiver, follow the pairing instructions provided with the new receiver unit. Typically, this involves putting the receiver into a pairing mode and then pressing the transmitter button.
6. メンテナンス
6.1 電池の交換
- 送信機: When the doorbell button no longer activates the receiver, or the range significantly decreases, it may be time to replace the A23 (12V) battery in the transmitter. Open the back cover, remove the old battery, insert a new one with correct polarity, and close the cover.
- 受信者: If the receiver stops sounding or its volume becomes low, replace its batteries (refer to the battery type indicated in the receiver's battery compartment).
6.2 クリーニング
Wipe the doorbell units with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or internal components. The transmitter is waterproof, but avoid using high-pressure water jets directly on it.
7。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ドアベルが鳴らない | Dead batteries in transmitter or receiver. Units are not paired. Receiver is out of range. | Replace batteries in both units. Re-pair the transmitter and receiver (refer to full manual if needed). Move receiver closer to transmitter. |
| 短い動作範囲 | Weak batteries. Obstacles (thick walls, metal structures) between units. Interference from other devices. | Replace batteries. Relocate receiver to a position with fewer obstructions. Ensure no other wireless devices are causing interference. |
| Receiver rings unexpectedly | 他のワイヤレス デバイスからの干渉。 | The ADB20 uses an encrypted signal to minimize this. If it occurs, try re-pairing the units or moving the receiver. |
| Cannot change melody or volume | ボタンが正しく機能しません。 | 電池が新品であることを確認してください。問題が解決しない場合は、カスタマーサポートにお問い合わせください。 |
8. 仕様
- モデル： ＡＤＢ０００５
- メーカー: アレクト
- 色： 白
- 送信機電源: 1 x A23 (12V) Alkaline Battery (Included)
- 受信機電源: Batteries (Type to be confirmed on unit, typically AA/AAA)
- 防水等級（送信機）: IP56
- 動作範囲: Up to 200 meters (open field), up to 50 meters (indoors)
- メロディー: 52選択可能
- 音量レベル: 5（0 dB～110 dB）
- 拡張性： Up to 6 additional receivers
- 寸法（送信機）： 8.1 x 2.5 x 8.1 cm
- 製品重量: 150g（パッケージ全体）
9. 保証とサポート
The Alecto ADB20 Wireless Doorbell comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official Alecto web詳細な保証条件については、サイトをご覧ください。
For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact your retailer or the Alecto customer service department. Contact information can typically be found on the manufacturer's webサイトまたは製品のパッケージ内。