1. はじめに
This manual provides instructions for the setup, operation, and maintenance of your new Generic Replacement Voice TV Remote Control, model AN-MR19BA. This remote is designed to be compatible with various LG OLED Smart TV models, including W8, E8, C8, and B8 series. Please read these instructions carefully before use to ensure proper functionality.
2. パッケージ内容
- 1x Replacement Voice TV Remote Control (AN-MR19BA)
Note: Batteries and a printed user manual are not included in the package.
3. セットアップ
3.1 バッテリーの取り付け
To power your remote control, you will need two (2) 1.5V AA alkaline batteries (not included).
- リモコンの背面にある電池ボックスのカバーを見つけます。
- カバーを下方にスライドさせてコンパートメントを開きます。
- 単三電池 2 本を挿入し、プラス (+) とマイナス (-) の端子がコンパートメント内のマークと正しく揃っていることを確認します。
- 電池ボックスのカバーを、カチッと音がするまで元の位置に戻します。

Figure 1: Battery installation in the remote control. Ensure correct polarity.
3.2 Pairing the Magic Remote with Your TV
Before using the Magic Remote, it must be paired with your LG Smart TV.
- Ensure batteries are correctly installed in the Magic Remote and turn on your LG TV.
- Point the Magic Remote directly at your TV screen.
- を押す ホイール(OK) button located in the center of the remote control.
If the TV fails to register the Magic Remote, turn the TV off and then back on, and repeat the pairing steps.

Figure 2: Pairing the Magic Remote by pressing the Wheel (OK) button.
4. 操作手順
4.1 Deregistering (Unpairing) the Magic Remote
To unpair the Magic Remote from your TV:
- を押し続けます 家 (
) そして 戻る (
) buttons simultaneously for five seconds. This will unpair the remote from your TV. - Alternatively, pressing and holding the ガイド button will allow you to cancel and re-register the Magic Remote at once.

Figure 3: Deregistering the Magic Remote by holding Home and Back buttons.
4.2 Using the Pointer Function
The Magic Remote features a pointer function for intuitive navigation.
- To make the pointer appear on the screen, gently shake the Magic Remote to the right and left, or press the 家 (
), 入力 (
)、 または Q.設定 (
) ボタンをクリックします。 - On some TV models, the pointer may appear when you turn the ホイール(OK) ボタン。
- If the pointer has not been used for a certain period or if the Magic Remote is placed on a flat surface, the pointer will disappear.
- If the pointer is not responding smoothly, you can reset it by moving it to the edge of the screen.
- Due to its additional features, the Magic Remote may deplete batteries faster than a normal remote.

Figure 4: Activating and using the pointer function.
4.3 音声制御
This remote supports voice control functionality. Once paired, you can use voice commands to interact with your LG Smart TV. Refer to your TV's user manual for specific voice command instructions.
5. メンテナンス
5.1 電池の交換
When the remote's performance degrades or it stops responding, it's time to replace the batteries. Follow the battery installation steps in Section 3.1.
5.2 クリーニング
リモコンを清掃する際は、柔らかく乾いた布をご使用ください。液体クリーナーや研磨剤は使用しないでください。リモコンの表面や内部部品を損傷する恐れがあります。
6。 トラブルシューティング
- Remote fails to register (pair) with the TV:
Ensure batteries are fresh and correctly inserted. Turn the TV off and then back on, then attempt the pairing process again (Section 3.2). Make sure there are no obstructions between the remote and the TV. - Pointer not appearing or responding:
Shake the remote gently or press the HOME, INPUT, or Q. Settings buttons to activate the pointer. If it's still unresponsive, try moving the pointer to the edge of the screen to reset it. Check battery levels. - ボタンが反応しない:
Check battery levels and replace if necessary. Ensure the remote is pointed directly at the TV.
7. 仕様
- モデル: AN-MR19BA
- 対応デバイス: LG W8, E8, C8, B8 OLED Smart TVs
- 接続技術: 赤外線
- コントローラタイプ: ボタンコントロール、音声コントロール
- 電源: 2x 1.5V AA Alkaline Battery
- 特集: 人間工学に基づいたデザイン
8. 保証とサポート
For any issues, questions, or support regarding your Generic Replacement Voice TV Remote Control, please contact the seller directly through your purchase platform. Please retain your proof of purchase for warranty claims, if applicable.





