infactory ZX7115-944

infactory Wireless Weather Station with 3 Outdoor Sensors and LCD Display

Model: ZX7115-944

1. はじめに

This manual provides detailed instructions for the setup, operation, and maintenance of your infactory Wireless Weather Station. This device is designed to monitor indoor and outdoor temperature and humidity, display weather trends, and record minimum and maximum values. Please read this manual thoroughly before using the product to ensure correct operation and to prevent damage.

infactory Wireless Weather Station main unit and three wireless outdoor sensors
The infactory Wireless Weather Station includes a main display unit and three independent wireless sensors for monitoring temperature and humidity across multiple locations.

2. パッケージ内容

開梱したらパッケージの内容を確認してください:

  • 1x infactory Wireless Weather Station (Main Unit)
  • 3x Wireless Outdoor Sensors
  • ユーザーマニュアル (本書) x 1
infactory Wireless Weather Station main unit alongside three wireless outdoor sensors
明確な view of the complete infactory Wireless Weather Station package, showing the central display unit and its three accompanying wireless sensors.

3. 安全に関する注意事項

  • デバイスを極端な温度、直射日光、強い振動、湿気から遠ざけてください。
  • 本製品を分解または改造しないでください。修理は資格のある担当者のみが行ってください。
  • Use only specified batteries (AA/Mignon). Ensure correct polarity when inserting batteries.
  • デバイスを長期間使用しない場合は、電池を取り外してください。
  • 電池はお子様の手の届かないところに保管してください。

4. セットアップ

4.1 バッテリーの取り付け

  1. 本体: Open the battery compartment on the back of the main unit. Insert 2x AA/Mignon batteries (not included), observing the correct polarity (+/-). Close the compartment.
  2. ワイヤレスセンサー: For each of the three wireless sensors, open the battery compartment. Insert 2x AA/Mignon batteries (not included), observing the correct polarity (+/-). Close the compartment.

4.2 センサーの配置とペアリング

The main unit will automatically search for signals from the wireless sensors once batteries are installed. Ensure sensors are within range (up to 60 meters in open air).

  • 本体配置: The main unit features foldable feet, allowing it to be placed on any flat surface, such as a desk or shelf.
  • センサーの配置: The wireless sensors can be placed on a flat surface or hung using the integrated hanging eyelet. For accurate outdoor readings, place sensors in a shaded, protected area away from direct sunlight and rain. Ideal locations include a patio, balcony, or garden shed.
infactory Wireless Weather Station main unit placed on a small table in a modern living room setting
The main display unit of the infactory Wireless Weather Station is designed to blend seamlessly into home environments, shown here on a side table, ready to provide essential weather data.

5. 操作手順

5.1ディスプレイオーバーview

The LCD display (9.5 cm diagonal) simultaneously shows indoor and outdoor temperature and humidity. It also features a comfort index and weather trend icons.

Close-up of the infactory Wireless Weather Station LCD display showing indoor and outdoor temperature and humidity readings, comfort index, and weather trend icons
This close-up image of the main unit's LCD display illustrates the comprehensive data presented, including indoor and outdoor temperature and humidity, comfort levels, and predictive weather trend icons.

5.2 Reading Data

  • 屋内での読書: The top section of the display shows the indoor temperature and humidity.
  • 屋外での読書: The lower section displays readings from the three wireless outdoor sensors (CH1, CH2, CH3). You can cycle through these channels or view them simultaneously, depending on the model's specific display layout.
  • 天気の傾向: Icons on the display indicate the predicted weather trend (e.g., sunny, cloudy, rainy).
  • Comfort Index: An icon or indicator shows the indoor comfort level based on temperature and humidity.

5.3 Minimum/Maximum Memory

The weather station automatically records the minimum and maximum temperature and humidity values for both indoor and outdoor readings. Consult the specific buttons on your device (e.g., 'MIN/MAX' button) to view these recorded values. These values are typically reset automatically at midnight or can be manually cleared.

infactory Wireless Weather Station main unit and three wireless outdoor sensors with feature icons indicating humidity, temperature, weather trend, battery, and 60m range
This image highlights the key features of the infactory Wireless Weather Station, including humidity and temperature measurement, weather trend display, battery operation, and a 60-meter wireless range for the sensors.

6. メンテナンス

6.1 クリーニング

Wipe the device and sensors with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the surfaces.

6.2 電池の交換

When the battery indicator appears on the display, replace the batteries in the main unit or the respective sensor. Always replace all batteries in a unit at the same time with new ones of the same type.

7。 トラブルシューティング

  • No outdoor readings: Ensure batteries are correctly inserted in the sensor and the main unit. Check if the sensor is within the 60-meter range and free from major obstructions. Try re-pairing the sensor by removing and reinserting its batteries, then doing the same for the main unit.
  • 不正確な読み取り: Ensure sensors are not exposed to direct sunlight, strong winds, or heat sources, which can affect accuracy. Allow some time for the sensors to stabilize after placement.
  • ディスプレイが機能しない: 電池残量を確認し、必要に応じて交換してください。電池の極性が正しいことを確認してください。

8. 仕様

特徴詳細
モデル番号ZX7115-944
本体寸法(長さ×幅×高さ)129 x 88 x 39 ミリメートル
本体重量285グラム
センサーの寸法 (長さ x 幅 x 高さ)49 x 95 x 17 mm(各)
センサー重量Approximately 52 g (each)
室内温度範囲-9.9℃~+50℃
屋外の温度範囲-40℃~+70℃
湿度範囲20%~95% RH
温度精度±1 °C
ワイヤレス範囲最大60メートル(屋外)
接続技術無線周波数
電源(本体)2x AA/Mignon batteries (not included)
電源(センサー)2x AA/Mignon batteries (not included)
画面LCD, 9.5 cm diagonal, backlit
特集Multiple external sensors, weather trend display, min/max memory, comfort index
Dimensions of the infactory Wireless Weather Station main unit: 129 mm length, 87.5 mm height, 39 mm depth
Detailed dimensions of the main weather station unit are provided: 129 mm in length, 87.5 mm in height, and 39 mm in depth, illustrating its compact design.
Dimensions of an infactory Wireless Sensor: 49 mm width, 95 mm height, 17 mm depth
Each wireless sensor measures 49 mm in width, 95 mm in height, and 17 mm in depth, making them compact and easy to place in various indoor or outdoor locations.

9. 保証とサポート

This product comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or service inquiries, please contact infactory customer service.

© 2023 infactory. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.